ANSYS (ANSS) Q4 2018 Earnings Conference Call Transcript
Image source: The Motley Fool.
ANSYS (NASDAQ: ANSS)
Q4 2018 Earnings Conference Call
Feb. 28, 2019 8:30 a.m. ET
Contents:
Prepared Remarks
Questions and Answers
Call Participants
Prepared Remarks:
Operator
Ladies and gentlemen, thank you for standing by, and welcome to ANSYS' fourth-quarter 2018 earnings conference call. With us today are Ajei Gopal, chief executive officer; Maria Shields, SVP and chief financial officer; and Annette Arribas, senior director, global investor relations. [Operator instructions] Please note, the call is being recorded. At this time, I would like to turn the call over to Ms.
Arribas for some opening remarks.
Annette Arribas -- Senior Director, Global Investor Relations
Good morning, everyone. Our earnings release and the related prepared remarks documents have been posted on the homepage of our Investor Relations website this morning. They contain all the key financial information and supporting data relative to our fourth quarter and full-year 2018 financial results and business update, as well as our initial Q1 and fiscal year 2019 outlook and the key underlying assumptions. I would like to remind everyone that in addition to any risks and uncertainties that we highlight during the course of this call, important factors that may affect our future results are discussed at length in our public filings with the SEC, all of which are also available via our website.
Additionally, the company's reported results should not be considered an indication of future performance, as there are risks and uncertainties that could impact our business in the future. These statements are based upon our view of the business as of today, and ANSYS undertakes no obligation to update any such information, unless we do so in a public forum. During this call, and in the prepared remarks, we'll be referring to non-GAAP financial measures unless otherwise stated. Please take any reference to revenue to mean revenue under ASC 606 unless we explicitly note that we are referring to ASC 605 results.
More From The Motley Fool
Note that all references to growth will be in terms of ASC 605 results since we have no baseline for last year under 606. A discussion of the various items that are excluded and a full reconciliation of GAAP to comparable non-GAAP financial measures under both ASC 605 and 606 are included in this morning's earnings release materials and related Form 8-K. In closing, I'd like to announce that our 2019 investor day will be held on Thursday, September 12 in Pittsburgh, with a reception and technology showcase event the evening before. Further details around location, logistics and the agenda will be announced in the very near future and will be available on our IR website.
I would now like to turn the call over to our CEO, Ajei Gopal, for his opening remarks. Ajei?
Ajei Gopal -- Chief Executive Officer
Thank you, Annette, and good morning, everyone. Q4 was yet another exceptional quarter for ANSYS. We delivered double-digit growth in revenue, earnings per share and operating cash flow. Our ACV growth of 28% in constant currency was particularly notable because of the challenging comparisons with Q4 of 2017.
For the year, revenue grew by 11% and ACV grew 17%, both in constant currency, and we ended the year with a record $957 million in 605 deferred revenue and backlog, which is a 24% increase over Q4 in 2017. To summarize, our financial results in Q4 were outstanding and provided a great ending to a stellar 2018. At investor day in 2017, we announced that our objective was sustained double-digit growth by 2020 while maintaining industry-leading margins. We introduced several strategic pillars to guide our journey to that objective.
I'm pleased that we have made important advances across all these priorities over the course of the past year. And with double-digit revenue growth in both 2017 and 2018, I'm confident we are tracking to our 2020 objective. The central pillar of our growth strategy was the need to extend our leadership in the core business by introducing new innovations and by transforming our go to market. Let me start with products.
Building on the momentum from last year's 19.x series of releases. We launched ANSYS 2019 R1 earlier this month. R1 features innovation after innovation, including a new Multibody Dynamics product line, an intuitive user experience in Fluent, our flagship CFD solution; an electromagnetic interference scanner that delivers results in seconds as part of our industry-leading electronic solutions; a new heads-up display capability in SPEOS, our flagship's optic solution; and multi-core platform support in SCADE, our embedded software solution. Each of these individual innovations is important in helping customers solve some of their most challenging problems.
Taken together, however, these show that ANSYS is leading the industry with advanced multiphysics simulation capabilities. We also recently launched a new ANSYS cloud native solution, enabled by Microsoft Azure that offers customers seamless access to on-demand high-performance computing in the public cloud. The offering is optimized for ANSYS solutions, initially ANSYS Mechanical and Fluent, and dovetails nicely with offerings by ANSYS' cloud hosting partners, which include both ANSYS' and third-parties' products. Based on the advances in our core products and the integration across our portfolio, we're continuing to help customers address some of their most challenging problems where they're aggressively investing in R&D.
Today, let me highlight some of our successes with autonomous systems. 3M has developed advanced materials that enable sensors to deliver additional information from enhanced infrastructure to advanced driver assistance systems, or ADAS. ANSYS' tools and services are opening the doors to new opportunities in the fast-changing automotive market by providing 3M credibility in demonstrating their sensor material performance under adverse weather and lighting conditions. This is another example of how ANSYS is helping a customer chase a multibillion-dollar market opportunity.
Another great example of our integrated solutions is with Oceaneering, which is developing autonomous submersible vehicles for use with offshore oil rigs. They're using a multiphysics ANSYS solutions to digitally test optical avoidance algorithms, a technique that could reduce costs by 90% and that's critical when in-water tests can run up to $150,000 each day. Moving to sales. You may recall that two years ago, we had embarked on the transformation of our go-to-market strategy to allow us to maximize our market opportunity and to correct underperformance in key geographies, notably Europe.
Our new go-to-market approach enables us to effectively grow and close large enterprise deals through the ANSYS direct sales team while simultaneously efficiently addressing the large volume of our transactional or momentum business through a combination of territory sales, channel partners and inside sales. That strategy has unlocked new opportunities, as you can see from our revenue and ACV growth numbers. We saw strength at all of our geographies. While North America led the way with 19% constant currency growth, I'm delighted that Europe grew 10% in constant currency, both in Q4 and in 2018, continuing the growth recovery we had expected.
On the large enterprise front, we began 2018 with a $50 million customer contract, at the time the largest in the history of ANSYS. And I'm thrilled to announce that we capped off the year with a Q4 $59 million contract across multiple product lines with a long-standing customer. The second pillar of our growth strategy was selectively investing in high potential adjacencies to expand our addressable market. You may remember that simulation has traditionally been used primarily as a validation tool.
As part of our vision of pervasive simulation, we're expanding the use of simulation up front in the design process with the Discovery Live during manufacturing with our additive manufacturing solutions, and in operations with Twin Builder. 2019 will be a validation and building year for these offerings, setting the stage for additional growth in 2020 and beyond. With its real-time simulation capabilities, Discovery Live has captured the attention of design engineers across the globe. One of the new users of Discovery Live, longtime ANSYS customer, Endress+Hauser, is seeing the benefits of simulation and product ideation.
This global leader in measurement instrumentation, services and solutions for industrial process engineering is cutting costs and reducing time to market by bringing simulation earlier in the product development process with Discovery Live. To quote one of the company's engineers, "With Discovery Live, we are agile. We are fast and we are efficient". Discovery has picked up more best new product awards than any other ANSYS solution in the last decade.
And at the end of Q4, we signed our first seven-figure discovery deal. Another new solution, Twin Builder, enables our customers to build, validate and deploy simulation-based digital twins. The market of Twin Builder is enormous, with a half of the large industrial companies expected to deploy digital twins in the next three years, and we are seeing early traction in the market. The home appliance and air solution division of the global giant, LG, is using Twin Builder to create virtual prototypes at the component level and share IoT information among products, supporting research to boost product reliability, reduce the time to market, decrease the need for physical testing and improve product development.
The next pillar of our growth strategy was pursuing strategic partnerships and acquisitions. On the partnership side, last week, PTC released Creo Simulation Live, which embeds ANSYS Discovery technology into Creo. With PTC's market leadership, this partnership grows the ANSYS reach to a new and broader base of design engineers around the world. While it is too soon to evaluate market success, early indications are positive.
During its most recent earnings call, PTC reported that it already had orders from 20 customers following its December preview release as well as more than 160 customers in its short-term pipeline. M&A continues to be a highlight for us. As you know, ANSYS has a long history of successful M&A, where we acquire companies with leading technologies, invest in both innovation and integration with the broader ANSYS portfolio and take advantage of the vast ANSYS customer footprint to increase customer adoption in sales and drive growth for ANSYS. We're following that same playbook with our two most recent acquisitions, both of which closed earlier this month.
The first is Granta Design, the pioneer of material intelligence and information technology. With the variety of materials available to product developers today, having accurate, traceable and reliable materials information is increasingly critical to simulation accuracy. Granta has proven world-class technology that has enjoyed success in some of the largest and most sophisticated companies. Rolls Royce, for example, used Granta to save $10 million to reduce setting, legacy data capture and other cost avoidance.
And although we share a few customers with Granta, including Lockheed Martin, Saudi Aramco and Airbus, their distribution was limited because of their size. Now as part of ANSYS, with our ability to reach customers in all geographies, there are many new opportunities to drive growth by introducing the Granta material solution to a much larger customer base. We also closed a smaller acquisition, Helic, which builds great technology to analyze and mitigate the risk of electromagnetic crosstalk for semiconductor designs. This is particularly relevant because megatrends like 5G and artificial intelligence are driving the need for extensive -- electromagnetic analysis to combat electromagnetic noise.
Helic's solutions, when combined with ANSYS' PowerArtist, our power integrity and noise analysis technology, as well as our market-leading electromagnetic solvers, will help engineers deliver on the promise of next-generation solutions. Our 2019 strategy for growth remains the same as last year. We'll continue to grow our core, expanding to the adjacencies we've selected, drive partnerships and pursue appropriate M&A. With the strategy in place, I'm excited that our guidance for 2019 is 12% constant currency 606 revenue growth at the midpoint for the full year.
This is an ambitious growth objective, especially in the light of our stellar performance in 2018, and it is a testament to the strength of the ANSYS franchise. I want to take a minute to talk about corporate commitment to environmental, social and governance initiatives. Last month, we were named the global 100 most sustainable corporations by Corporate Knights, a firm slowly focused on tracking and ranking customers that's committed to sustainability. This is a powerful recognition of our company and our employees.
And now I'd like to turn the call over to Maria.
Maria Shields -- SVP and Chief Financial Officer
Thank you, Ajei. Good morning, everyone. As you heard from Ajei, by any financial measure, we delivered another quarter and year of exceptional results. This is quite an accomplishment when you consider the strong comparable of both Q4 and 2017.
I'll take a few minutes to add some additional commentary around our fourth quarter and annual financial performance, and we'll close with an update on our outlook and key assumptions for Q1 and 2019. Throughout 2018, we have been providing financial results and outlook under both ASC 605 and 606. Consistent with our messaging throughout the past year, beginning in 2019, we will transition to only reporting our financial results under ASC 606. For purposes of today's commentary, any comparisons that I make relative to growth rates will be comparing 2018 to 2017 results under ASC 605 and in constant currency.
And for the last time, I'll provide key financial metrics under both 605 and 606, and consistent with our standard practice, my comments will be in terms of non-GAAP unless I state otherwise. We would also like to announce that we will be removing the statistics on cumulative orders above $1 million in our future communications. While this metric was relevant when we first introduced it over a decade ago, the $1 million threshold is arbitrary and has become less meaningful over the past two years as the company has begun to experience higher deal values with transactions increasingly incorporating multiphysics. It gives equal weight to both the $59 million transaction that Ajei previously mentioned and to a transaction that may be less than 2% of that value, which we believe is not useful in evaluating our performance.
As we move forward, we believe the best indicator of our go to market and large deal progress is the overall ACV growth across the full calendar year. I do want to mention that we closed the fourth quarter with 68 customers that have orders over $1 million, a 39% year-over-year increase and four customers that had orders of over $10 million. Our Q4 results reflect a great finish to our strongest year ever, one in which we experienced continued accelerated business momentum and execution across the company. We reported constant currency revenue growth of 14% for the quarter and 11% for the year and EPS results that were above the high end of our guidance under both ASC 606 and 605.
Our ongoing record of execution throughout every quarter of 2018 gives us confidence that we are on a path to continue to make progress against our strategic priorities and to deliver another record year of financial results in 2019. Other key financial metrics that I would like to highlight begin with Q4 and fiscal year 2018 constant currency ACV growth of 28% and 17%, respectively. For the year, we reported total revenue of $1.2 billion and $1.3 billion under 605 and 606, respectively. Fourth-quarter revenue under ASC 605 and 606 totaled $340 million and $418 million, with the large disparity between the two coming primarily from the upfront recognition of the license component of leases under ASC 606.
As mentioned earlier, the strong fourth-quarter results included a $59 million four-year deal, the largest in our history. This deal, which was not included in our guidance, was a principal driver of the overachievement in our Q4 606 results on both the top and bottom line. It also illustrates the increased volatility that results from the upfront recognition of the entire license component of multiyear lease transactions. And further, the earnings volatility is even more pronounced because the additional upfront revenue comes with minimal variable costs.
The inclusion of this deal in our 2018 results also adversely impacts our fiscal year 2019 growth rates by approximately 1% for ACV, 2% for revenue and 5% for diluted EPS. The increase in software license sales, combined with strong maintenance renewals, contributed to our deferred revenue on backlog under 605 of $957 million, representing a new record Q4 high and a 24% increase over last year's very strong comparables. Deferred revenue on backlog under ASC 606 totaled $659 million. Total recurring revenue for the quarter and the year under 605 were 16% and 12% in constant currency to totals of $245 million and $933 million or 72% and 76% of total revenue, respectively.
Lease and maintenance revenue each grew double digits for the quarter and the year, indicative of strong renewals and expansions within our global customer base as well as the value that our customers place on the ongoing investment in innovation and the high quality of our support services. This increase in our recurring revenue streams in Q4 and 2018 was relatively balanced across each of our three major geographies, each of which delivered double-digit constant currency growth in recurring revenue. Under ASC 606, recurring revenue totaled $305 million for Q4 and $962 million for the year or 73% and 74% of total revenue, respectively. Our strong and growing base of recurring revenue improves the predictability around our future performance.
The operating margins under 605 were 40.5% for the quarter and 44.4% for the full year. The lower fourth-quarter margin is consistent with our recent financial guidance and reflects the significant incremental sales commissions that typically occur in the fourth quarter, as high achieving sales personnel hit their commission accelerators. The full-year margin is also consistent with the expectations that we set at the beginning of 2018 and maintained throughout the year. The operating margins under 606 were 51.6% for the quarter and 47.4% for the year.
Those results exceeded our expectations and were driven primarily by the revenue overperformance under ASC 606. Both sets of results are evidence that we are committed to managing our business with discipline and to ensuring that the incremental investments are driving the annual ACV and top-line growth that we have planned. We reported fourth-quarter EPS of $1.39 under 605, up 30% growth over the last Q4 and $2.13 under 606. And for the year, we also finished with record EPS of $5.30 under 605, a 32% growth over fiscal year 2017; and $5.98 under 606.
The overperformance on EPS in the quarter was driven by the very strong top-line finish. With respect to taxes, under both standards, our effective tax rate was approximately 18% for the year and 17% to 18% for the fourth quarter. Looking ahead into 2019, we currently expect our effective tax rate to be in the range of 21% to 22% for Q1 and the full year. And for 2019, we have assumed a slightly higher mix of income in foreign jurisdictions, which have a higher tax rate as compared to the U.S.
Our cash flow from operations totaled $133 million for the fourth quarter and $486 million for the year. We closed the year with a total of $777 million in cash and short-term investments, of which 79% was held domestically. And while we are discussing our cash balance, I wanted to also note that we just closed a 5-year $500 million revolving line of credit. While the line of credit is new for ANSYS and is not for any imminent need, it's simply intended to give us additional capital flexibility as we continue to grow the business.
Also, in line with our previously communicated capital allocation priorities, we repurchased 500,000 shares during the quarter and 1.7 million shares during 2018 at a total cost of $77 million and $270 million, respectively. Currently, we have 3.8 million shares available for repurchase. Now let me turn to the topic of guidance. We are initiating our guidance for Q1 and expect non-GAAP revenue in the range of $290 million to $310 million and non-GAAP EPS in the range of $0.98 to $1.11.
And for fiscal year 2019, we expect non-GAAP revenue in the range of $1,410,000,000 to $1,470,000,000 or constant currency growth of 10% to 14% and EPS in the range of $5.55 to $6. Our 2019 outlook includes the contributions from the recently acquired Granta Design and Helic businesses. We are currently forecasting a range of $20 million to $25 million of revenue and ACV for 2019. The combined impact of the capital utilized in the acquisitions and the incremental integration investments that will be necessary throughout the remainder of the year will result in the near-term impact of approximately $0.05 to $0.07 of dilution for 2019 as we integrate these acquisitions into our core business.
Our ACV outlook for 2019 is a range of $1,410,000,000 to $1,465,000,000. This represents constant currency ACV growth of 8% to 12%. Our initial outlook for annual operating cash flows is a range of $470 million to $510 million for 2019. I would like to highlight that our outlook for 2019 includes higher tax payments that relate to the accelerated lease license revenue and related profitability that incurred in the fourth quarter of 2018 under ASC 606 as well as the expected adverse first-year impacts of the acquisitions.
For modeling purposes, we're expecting first quarter operating margins in the range of 36.5% to 38.5%; and for fiscal year 2019 in the range of 43% to 44%. The recently announced acquisitions of Granta Design and Helic are expected to adversely impact our operating margin by approximately 1% in 2019. As we head into 2019, I would like to again remind everyone that our focus will be on progress against annual targets as opposed to quarterly results simply due to the volatility in quarterly revenue, operating margin and EPS that result from the timing of large lease transactions under 606. As we saw in our 2018 results, our Q4 business volume, with 28% constant currency ACV growth, continues to grow seasonally stronger.
It is by far our largest quarter for new business, particularly for large multiyear deals. As we look ahead to 2019, we see a very similar seasonal pattern, with a disproportionately large Q4 dynamic. Further details around specific currency rates and other key assumptions that have been factored into our outlook for both Q1 and 2019 are contained in the prepared remarks document. In summary, we are very pleased to have delivered another excellent quarter and year, with strength across all of our key financial metrics.
We also continue to deploy capital to drive long-term stockholder value through investing in our core business, pursuing important M&A targets and additional share repurchases. Our strong close to another year gives us confidence that our continued focus on execution and investing in the business, both organically and through M&A, supplemented by our growing base of recurring business, strong customer relationships and a healthy sales pipeline, provide a solid foundation to deliver on another strong year in 2019 as well as our 2020 financial targets. Operator, we will now open the phone lines to take questions.
Questions and Answers:
Operator
[Operator instructions] The first question comes from Rich Valera of Needham & Company. Please go ahead.
Rich Valera -- Needham and Company -- Analyst
Thank you. Congratulations on the strong results. Just wanted to hone in on Discovery Live here, Ajei, and get your sense on the potential impact both in '19 and beyond. It sounds like some promising initial returns from the PTC agreement as well as some sort of organically.
So if you can just frame that out for us in terms of maybe what you've baked in for '19 and how you think about that longer term? Thank you.
Ajei Gopal -- Chief Executive Officer
Thanks, Rich. Thanks for the question. So as far as Discovery is concerned, as I said in my comments, we are very excited about what we have in terms of the technology, and obviously we're taking it to market both directly through our sales force as well as in conjunction with the OEM that we have with PTC. PTC recently announced its new product.
It was announced last week. There was a webcast webinar yesterday. I think that 2,000 customers or 2,000 individuals have signed up for that webinar as well. So there's obviously a lot of excitement in the PTC customer base as well for that.
So we're very excited about it. We see 2019 as essentially a validation year. We don't really see this as being a big revenue year yet. This is not -- this is still early stages for a product which I think is transformative, but the fact is in our market, it takes a while probably to gain momentum.
So we feel this is a building year and we will continue to come up with a new version for the technology. PTC will continue to improve that product with the integration of our technology into it. We learned this year, and I' looking forward to -- I'm really looking forward really next year to seeing some more tangible results from a revenue perspective.
Operator
The next question comes from Ken Wong of Guggenheim Securities. Please go ahead.
Ken Wong -- Guggenheim Securities -- Analyst
Great. Thanks for taking my question. This question may be geared toward Maria. When looking at your margin outlook of 43%, 44%, obviously, that's consistent with how you guys have been framing kind of where the margins could go with your investments and double-digit growth, but obviously it's a step-down from what we saw in fiscal year '18.
Can you maybe just talk about kind of where some of those investments are coming and maybe some of the headwinds on the margins for '19?
Maria Shields -- SVP and Chief Financial Officer
Yes. Ken, I'd say the biggest headwinds on the margins are for the dilutive impact from the two acquisitions that Ajei spoke to in his remarks. As you can imagine, most of the acquisitions that we're looking at, particularly the smaller tuck-ins, have no margin structure that's near ours. So -- but there are important technologies that advance our road map and extend our multiphysics capabilities.
So we will be making some investments relative to integrating those two acquisitions, and as a result of the capital deployed as well as those integration investments, we'll have dilution in 2019, and we'll see them becoming more accretive to profitability as we head into 2020. Additionally, from the core business, we are continuing to invest in the business, in talent, R&D, AEs, field engineers and infrastructure to continue to be able to scale the business over the long term.
Operator
The next question comes from Gal Munda of Berenberg Capital Markets. Please go ahead.
Gal Munda -- Berenberg Capital Markets -- Analyst
Hey, thanks for taking my question. I would just like to focus a bit on the very, very large deals. I don't know if we can call them mega deals. In terms of the fact that 2018 was kind of a breakthrough year for you, maybe after the number of those have come through now, can you talk a bit about the predictability and the nature of those deals that you see in terms of maybe of the sales cycle compared to what the usual deal, kind of large deal, previously would take and how much effort it takes? I hope that makes sense.
Ajei Gopal -- Chief Executive Officer
Sure. Hey, Gal. Thanks for the question again. So a couple of quick comments about large deals.
Firstly, large deals don't just happen by themselves. They happen as a result of a long-term relationship between our -- us as a company and the customer. And that's a relationship that takes years to develop, and it's a relationship that we pride ourselves on and we maintain because of the level of investments we're making both in our product as well as in our technical capabilities with customers. And so that's one important aspect of those relationships.
And as the $59 million deal that we talked about is from a long-standing customer of ours, as an example. And the second thing is what we're seeing is many of these large deals are obviously not just single product deals. These are -- these pull together multiple products from multiple product lines and so they're essentially multiphysics deals. And that's really important for us because when we think about the direction where some of these large companies are going, they're looking at more challenging problems.
They're looking at more -- they're looking at solutions which require necessarily this multiphysics analysis that they bring to the table. And so that's another element as well of some of these large deals. And so when you think about the pipeline that we're seeing for this year for some of the larger deals, we're kind of back-end focused -- we're back-end loaded this year. So a lot of activity is happening in the latter part of the year.
Q4 is obviously going to be a heavier quarter, much like Q4 in 2018 was a heavier quarter, and that's also part of the way that we're thinking about the year. So we have visibility into the pipeline. We have been developing these deals and these relationships with customers, and as I said, the relationships take years to develop. And this is part of the cadence that we're building into our business as we go forward, understanding how to manage these large deals to understand what they look like in the pipeline, make sure that we can bring the relevance of the solutions to bear with both our sales organization as well as our technical organization and then slot them in from an execution perspective.
Operator
The next question comes from Sterling Auty of JP Morgan. Please go ahead.
Sterling Auty -- J.P. Morgan -- Analyst
Thanks. Hi, guys. In your prepared remarks, you talked about some of the crosstalk in semiconductor design. I'm kind of curious as you look into 2019, how much of the growth dynamics are you expecting to come from more of your EDA portfolio versus the rest of the portfolio? And then Maria, just to sneak in, can you give us a sense, what did 2018 acquisitions actually contribute to the 2018 full-year ACV?
Ajei Gopal -- Chief Executive Officer
Again, thanks for the question. So let me address very quickly the opportunity for '19. Obviously, electronics, in general, is very strong for us. We have solutions that help us both in the traditional EDA market as well as in the broader high-tech market.
And frankly, we see tremendous opportunity in 2019 and beyond, and it's obviously being fueled by the complexity of semiconductors that are rolling into solutions for autonomous and for 5G, for AI, cloud computing. One of the things that are demanding more and more complexity for semiconductors. Obviously, that's driving process nodes -- customers toward advanced process nodes. But from our perspective, that also pulls in a need to be able to do multiphysics analysis, and it's not uniquely about looking at one individual physics.
It's understanding the implications at the chip level, at the board level, at the system level, and that requires fairly an understanding of all the different physics as we've discussed in the past. And so I think that's going to be very important, certainly as we see the use of semiconductors in these next-generation applications. Maria?
Maria Shields -- SVP and Chief Financial Officer
Yes. Sterling, relative to the contribution to ACV in 2018 from the acquisition, it was $25 million.
Operator
The next question comes from Saket Kalia from Barclays. Please go ahead.
Saket Kalia -- Barclays -- Analyst
Thanks for taking my question here. Maybe for you, Maria. On the large $59 million lease deal in the quarter, can you remind us how the cash collections on that multiyear deal will work?
Maria Shields -- SVP and Chief Financial Officer
Yes. So Saket, as you saw in the materials, it's a four-year deal with annual payments, and that first payment will come into 2019.
Operator
The next question comes from Steve Koenig of Wedbush Securities. Please go ahead.
Steve Koenig -- Wedbush Securities -- Analyst
Thanks for taking my question. I'd like to maybe dig into your -- what you're doing in cloud here. And so Ajei, you mentioned you've got a new cloud data solutions on Azure. Maybe just can you back up a little bit and remind us, what -- how are you currently going to market through hosting partners? And then what's different about the new Azure solution that you're offering relative to either product or pricing model? And just remind us are the hosting partners -- is that a BYOL model for them and then customers rent? So just kind of refresh me on how you're going to market in cloud and how this new offering might be different here?
Ajei Gopal -- Chief Executive Officer
Right. Great question. So we currently go to market, as you rightly pointed out, with a network of cloud hosting partners, so we're essentially around the globe. And they provide turnkey access to the ANSYS portfolio.
So our cloud hosting partners take advantage of whatever public cloud infrastructure they choose to use. The customer works with them and they're able to work with both ANSYS technology as well as third-party technology and offer that as essentially as a cloud solution. So they service the cloud partner, if you will, for the customer and the customer directly works with them. And that's a great partnership with us and the cloud hosting partners that's been working very well.
What we've done with the ANSYS cloud is we've taken a slightly different approach. And here now, within -- directly within our flagship products initially with FLUENT and Mechanical, you can directly access the HPC capabilities in the cloud, in this case, the Azure public cloud. And so it's completely seamless. It's completely built into the UI.
And you have an option when you're using the products to then choose to use the public cloud, which essentially provides seamless HPC for our customers. And obviously, that provides -- that makes the cloud a little bit more accessible. It provides convenience because the customers or engineers can -- without having to leave the environment that they're working in every day, they can enlist this additional compute power without even being an expert on HPC. And obviously, this makes HPC easy to use, and we're excited about that.
And in the coming months, we'll be adding more services and capabilities to the ANSYS cloud. It dovetails nicely with what our public -- with our cloud hosting partners, what they provide, and we're excited about providing our customers a choice of how they want to take advantage of the public cloud.
Operator
The next question comes from Gabriela Borges of Goldman Sachs. Please go ahead.
Gabriela Borges -- Goldman Sachs -- Analyst
Hi. Good morning, Ajei. I wanted to ask about the dynamic of your top 100 customers, where ANSYS has dedicated more technical resources to those customers. They've actually thrived with higher sales.
How do you think about how kind of strategy at your largest customers? And as part of that, any metrics you can share on multiphysics penetration or adoption would be helpful. Thank you.
Ajei Gopal -- Chief Executive Officer
Sure. So as you well know that these larger deals, as I mentioned already, these larger deals do include multiphysics deployments or multiphysics -- I mean, they're multiphysics in nature. I would say that, for our largest 100 customers, most of them probably have three or more products from -- three or more physics, if you will, installed and are taking advantage of them. So I would say that it's a pretty broad penetration of multiphysics into the largest 100 customers.
That being said, I think that the market for simulation is still early stages because when you think about where the use of simulation is even at the very large customers, there's plenty of opportunity to continue to increase the use of simulation. Our strategy for simulation and the use of simulation is to make it more pervasive. Historically, it's obviously been used in the validation phase, and even there, I think we're underpenetrated. But if you start to think about the opportunity going upstream to the designers and then downstream into manufacturing and operations, I think we have a significant opportunity.
And we're seeing that because with some of these larger deals, yes, there is improved sales execution. Obviously, there's improved sales execution. But it's also the case of the customers need the technology. No one would be buying things if they didn't need it.
The customers need the technology because we're able to demonstrate the value of the technology in different use cases and to addressing different customer needs, and that's translating into greater demand for our offering. And so you see with these large deals, these are customers we've had for numbers of years and then we continue to expand the footprint and the penetration into those organizations, and I don't believe that we're reaching an asymptote or anything of that nature. So we're excited about our future. We're excited about the opportunity in front of us.
Operator
The next question comes from Ken Talanian of Evercore ISI. Please go ahead.
Ken Talanian -- Evercore ISI -- Analyst
Thanks for taking the question. I was wondering if you could give us a recap of the changes you made to both the sales force and the channel this year and your plans for 2019.
Ajei Gopal -- Chief Executive Officer
Sure. I think the further -- the importance -- and I couldn't tell you exactly what happened in 2017 versus 2018, but essentially what we did is there's a pretty deep segmentation of our customers and separated them into different categories, if you will. There's a segment of our customer base where we directly address the customer through the ANSYS direct sales force, and these tend to be the largest of customers. And typically, you'll have an account manager looking after a small number or one customer with technical support.
And this is where a lot of the larger deals come from. We also have what we call -- we also have territory sales individuals who are not focused on the largest accounts. And we have what we call a momentum sales motion, which is more transactional in nature. And these are the next generation or the next level, if you will, of customers, where the coverage is less, it's not so much one-to-one, it's less -- it's single sales individual may cover several different accounts or we will have channel partners who are then working with us to also cover accounts.
And so through the combination of channel partners and territory sales, we're able to cover some of these accounts. We also have invested in inside sales and our inside sales activity is doing well. And we're able to then not just create inside demand. It's not just an organization to set up meeting, but we have an organization that can actually close business telephonically through our inside sales organization.
Obviously, that is -- that does tend to be smaller deals, but some of them are very nice deals as well. And so that combination of being able to go direct to large organizations with more focus, being able to manage the territory effectively and leveraging the channel partners and leveraging inside sales to be able to scale the transactional aspects of the business is really what's been contributing to our success on both fronts on the large enterprise side as well as on the small enterprise side. As we look at -- as we go forward into 2019, the challenges for the sales organization, obviously, are -- we have two new acquisitions in the form of Granta and Helic. We're integrating them into the sales organization and to our go-to-market motion.
That technology will be available to, obviously, our direct sales people as well as to our channel partners to be in a position to stay to market. So we're excited about -- and we're excited about that work, and that means integrating the technical sales organization, as well as teaching our sales organization. Outside of that, the same structure that I described, maybe going after large enterprise customers being able to manage the momentum accounts, that remains in place as we think about our business in 2019.
Operator
The next question comes from Matt Pfau of William Blair. Please go ahead.
Matt Pfau -- William Blair and Company -- Analyst
Hey, guys. Thanks for taking my question. Just wanted to ask on Discovery Live. Maybe you can talk about the initial traction you're seeing.
Is it different users than you would typically see using ANSYS? And then the funding for these deals, is it coming from different budgets that would typically be used to purchase ANSYS? Thanks.
Ajei Gopal -- Chief Executive Officer
So we -- our approach for Discovery has been twofold. One is that we think that it could be customers -- we've historically had larger customer who are taking advantage of Discovery, although it may be -- excuse me, it may be a different user base within that large customer. So maybe a different caliber of users who have not historically used the ANSYS flagship solutions but who do -- who could benefit from the use of simulation. So even though it will be the same large customer, it will be a different user within that.
And we're seeing that certainly within our own go to market with Discovery, but we're also seeing that, as you think about some of the conversations we've been having with our colleagues at PTC in terms of how they're thinking about our positioning Creo Live as well. And then the other area that we think that we will be able to bring in customers is customers have historically not necessarily been ANSYS users, who tend to -- who are smaller haven't found -- haven't felt that they could manage the use of simulation even though they would benefit from that, and we believe that there's an opportunity there as well. And that's -- I would say that that's harder for us to quantify right now but that's also an opportunity that we are excited about.
Operator
The next question comes from Ross MacMillan of RBC Capital Markets. Please go ahead.
Ross MacMillan -- RBC Capital Markets -- Analyst
Thank you very much, and congratulations from me as well. So when I look at '18, I think your organic constant currency ACV growth was about 14%. And even if we take out the large deal in Q4, I think it would be 12%. And then when I look at '19, it's on a constant currency organic basis in the kind of 7%, 8% range, so a big sort of stepdown.
And I just wanted to know if that's just elements of prudence. Or are there any other things that you're thinking about that would create that deceleration? And maybe related to all of this is just, can we just touch on the philosophy on these large multiyear transactions? You said the one in Q4 was not in the guidance. Does that imply that you are excluding deals like this from your future guidance? Thanks so much.
Maria Shields -- SVP and Chief Financial Officer
So Ross, relative to our outlook for 2019, I would say we have forecasted based on our visibility in the pipeline as it exists. And no doubt we are going to be a little bit prudent as it's just the beginning of the year. And similar to what we experienced in 2018, given that the majority of those large transactions are currently forecasted for Q4, we want to build in a little bit of conservatism, if you will. That being said, relative to that $59 million deal in particular, we did not include it in our guidance because at the time that we gave our outlook back in November, there were still a number of moving parts relative to that deal including some competitive dynamics that, quite frankly, could have easily made that a Q1 deal.
And given the size of it, particularly the impact under 606 with $30 million of revenue and $0.28 of earnings, to the extent that it had closed in Q1, it would have just left too big a gap. So the downside risk was not worth trying to be aggressive on forecasting that deal. The reality is, we're still in the learning stages relative to the predictability of these. And as it becomes more of an ongoing part of our business and we learn more about exactly different personalities that have different perspectives on closing, we'll get better at it.
But for now, we are going to build a little bit of caution into our outlook so that we don't have any downside surprises.
Operator
The next question comes from Jay Vleeschhouwer of Griffin Securities.
Jay Vleeschhouwer -- Griffin Securities -- Analyst
Thank you. Good morning. Could you comment, Maria, on your expectation for expense growth in 2019? You grew your headcount by about 500 for the year versus a prior many-year average, just about 100 or so increase in headcount per year, so pretty considerable difference there. And relatedly for Ajei, having spent the last six to eight quarters on your go to market and AE investments, could you talk about the relative investments or initiatives on those two things for the next year or more as compared to the past year or two? And the preparations you need to make or investing in, vis-à-vis infrastructure, acquisitions integration, data centers and the like to prepare for the future growth.
Thank you.
Maria Shields -- SVP and Chief Financial Officer
Yes. So Jay, let me take your first question relative to our plans relative to investing. Our 2019 plans currently anticipate adding about 300 new employees to the organization throughout 2019. As of the end of January, we've got about 176 positions open for hire across the globe.
Other things that I spoke to earlier, we will be absorbing the two recent acquisitions which will require some additional integration costs in 2019. And then as you just mentioned, we do have a number of infrastructure investments, not necessarily data centers, certainly some of our own HPC capacity internally. But most of our investments around talent and additional costs that come with talent relative to licensing around digital technology that they're leveraging, and we're also investing in our own digital technology to really be able to automate and scale our processes consistently across the globe.
Ajei Gopal -- Chief Executive Officer
And I think Jay, the other part of your question was around our investments in our technical capability -- customer-facing capability, our ACE organization. And yes, that continues to be an area that we are making investments. And you'll see that if you look at our -- go online and look at the kinds of people that we're looking to hire. And we're making investments in our organization essentially across the product portfolio across the world.
Obviously, we've got some new talent coming in through the acquisitions of Granta and Helic. And those individuals will obviously join the company and will be essential, of course, as we start to expand in those areas as well. So there will be expansion in our ACE capabilities in 2019.
Operator
The next question comes from Monika Garg of KeyBanc. Please go ahead.
Monika Garg -- KeyBanc Capital Markets -- Analyst
The question for you, Maria, the question is like you are guiding cash flow flattish year over year. Can we add some color around that? I mean, you did talk about slightly higher taxes. Could you -- buyback number, how much increase you are baking in for year over year?
Maria Shields -- SVP and Chief Financial Officer
Yes. Monika. So I'd say, as you think about cash flow for 2019, there's a few headwinds that we're facing in addition to the additional taxes from the 606 overperformance. We've also got a headwind of about 1% to 2% from currency, and the two acquisitions that we did are expected to be dilutive to cash flow in 2019.
If you think about relative to the quantification of the tax impact, our tax rate in 2018 was about 18% for the full year, and we're guiding to 21% to 22% for 2019. So that's really kind of the differential in tax payments relative to 606 as we head into 2019.
Operator
The next question comes from Matt Lemenager of Robert W. Baird and Company. Please go ahead.
Matt Lemenager -- Robert W. Baird and Company -- Analyst
Great. Thanks. It's Matt on for Rob. I have a question around North America.
It's now grown 13% or faster, I think, six of the past eight quarters. Ajei, is there anything in particular driving that, simply sharper execution or anything standing out direct versus indirect? Anything to -- that's kind of driving that?
Ajei Gopal -- Chief Executive Officer
So I think there's obviously great execution in North America and there's been a lot of large deals activity as well to be able to direct in North America. And I think to a certain extent, just given the nature of some of these large deals, these tend to be long-term customers that historically have been with us for a long time. That's been -- we've been able to build on that given the way the North America team has been laid out. But no, I think from a market demand perspective and what customers are looking for, it's kind of -- you would expect the same sort of thing from customers, whether they're based -- headquartered in North America, whether they're headquartered in Europe or whether they're headquartered in Asia.
And I think that the execution aspects of the North America business has also been very strong.
Operator
This concludes our question-and-answer session. I would like to turn the conference back over to Ajei Gopal for any closing remarks.
Ajei Gopal -- Chief Executive Officer
Thank you, Andrew. So 2018 was another outstanding year for ANSYS, with strength across all of our key financial metrics. We improved our go-to-market execution and we broadened our product capabilities. These important accomplishments continue to move the business in the right direction and give us confidence in our ability to achieve our long-term targets.
We look forward to another exciting year in 2019. In closing, I would like to express my sincere gratitude to our customers and to our partners for their support. And a shout-out to my ANSYS colleagues, thank you all for your efforts and thank you for another exceptional quarter and an exceptional year. Thank you all for joining the call today, and I look forward to our next call.
Enjoy the rest of your day.
Operator
The conference has now concluded. Thank you for attending today's presentation. You may now disconnect.
Duration: 60 minutes
Call Participants:
e
This article is a transcript of this conference call produced for The Motley Fool. While we strive for our Foolish Best, there may be errors, omissions, or inaccuracies in this transcript. As with all our articles, The Motley Fool does not assume any responsibility for your use of this content, and we strongly encourage you to do your own research, including listening to the call yourself and reading the company's SEC filings. Please see our Terms and Conditions for additional details, including our Obligatory Capitalized Disclaimers of Liability.
More From The Motley Fool
Motley Fool Transcribing has no position in any of the stocks mentioned. The Motley Fool has no position in any of the stocks mentioned. The Motley Fool has a disclosure policy.
