Applied Materials, Inc. (AMAT) Q1 2019 Earnings Conference Call Transcript
Image source: The Motley Fool.
Applied Materials, Inc. (NASDAQ: AMAT)
Q1 2019 Earnings Conference Call
Feb. 14, 2018, 4:30 p.m. ET
Contents:
Prepared Remarks
Questions and Answers
Call Participants
Prepared Remarks:
Operator
Welcome to the Applied Materials Earnings Conference Call. During the presentation, all participants will be in a listen only mode. Afterwards, you will be invited to participate in a question and answer session.
I would now like to turn the conference over to Michael Sullivan, Corporate Vice President. Please go ahead, sir.
Michael Sullivan -- Corporate Vice President
Good afternoon. We appreciate you joining us for our First Quarter of Fiscal 2019 Earnings Call, which is being recorded. Joining me are Gary Dickerson, our President and CEO; and Dan Durn, our Chief Financial Officer.
Before we begin, let me remind you that today's call contains forward-looking statements, including Applied's current view of its industries, performance, products, share positions, and business outlook. These statements are subject to risks and uncertainties that could cause actual results to differ materially, and are not guarantees of future performance. Information concerning these risks and uncertainties is contained in Applied's most recent Form 10-K and 8-K filings with the SEC.
More From The Motley Fool
All forward-looking statements are based on management's estimates, projections, and assumptions as of February 14, 2019, and Applied assumes no obligation to update them. Today's call also includes non-GAAP financial measures. Reconciliations to GAAP measures are contained in today's earnings press release and in our reconciliation slides, which are available on the Investor Relations page of our website at appliedmaterials.com.
And now, I'd like to turn the call over to Gary Dickerson.
Gary Dickerson -- President and Chief Executive Officer
Thanks, Mike. In our first fiscal quarter of 2019, Applied Materials delivered solid results in a challenging business environment. Over the past two months, we have become increasingly cautious about near-term macroeconomic risks and have seen further pullback in customers' investments. At the same time, we remain highly optimistic about the long-term. Powerful new growth drivers for the semiconductor and display industries are emerging, and we see tremendous opportunities for the company ahead. While we're taking appropriate actions to navigate current market dynamics, we are not losing focus on the bigger picture. We're making strategic investments in new technology, products, and capabilities that will position Applied to play a bigger and broader role in the future.
In today's call, I'll start by providing more details about our outlook for the year ahead. Then, I'll talk about the future growth drivers that are reshaping our industry. And I'll finish by describing Applied's strategy, and highlight some recent accomplishments and milestones.
Let me begin with the near-term environment and our current perspective on 2019. In the past quarter, there's been more negative than positive news, with the whole industry facing challenges, which include macro conditions in emerging markets that have weakened; smartphone demand falling short of expectations, particularly for high-end models, which have more semiconductor content; and DRAM prices, which have declined as inventory levels build.
On the positive side, we've also observed that NAND inventories are coming down from very high levels seen in the fall, although they remain above normal levels. Fundamental dynamics in the memory market are healthy, with very disciplined investment in new capacity and a strong commitment to advance the technology roadmap. And, looking more broadly at semiconductor capital investment, it's important to note that we're in a period of market transition and diversification. For the past several years, smartphones drove the majority of wafer fab equipment spending. This year, more than half of customers' investments will be driven by other categories, as new growth drivers, including cloud data centers, IoT devices, 5G, and automotive applications, gain momentum.
When we take all these factors into account, we see the following implications for Applied's served markets. Based on recent public comments by our customers, NAND bit demand is expected to grow in the mid-30% range this year, and DRAM bit demand in the mid to high teens. As result, we believe that investment by memory customers will be down substantially in 2019. However, we also expect channel inventory levels to normalize as the year progresses, creating a more favorable setup for 2020. In foundry/logic, we see investment being flat to slightly up year-on-year, but we expect a higher portion of the spending to be directed toward long lead-time equipment, specifically EUV lithography. While this represents a market share headwind for Applied in both 2018 and 2019, it's also a positive indicator of customers' future investment in leading-edge process tools. Overall, we believe that wafer fab equipment spending in 2019 will be down mid to high teens on a percentage basis versus last year.
In display, weakness in emerging markets is also impacting the timing of customers' investment plans. We see some TV factory projects pushing out of the year and into 2020. As a result, we now believe our display equipment revenue in 2019 will decline by about a third from 2018's record levels. We also expect revenue in the second fiscal quarter to be significantly lower than our average run rate for the year. Over the longer-term, we believe the display market remains attractive, as the industry is going through several large technology transitions, as larger substrates are introduced in TV manufacturing, rigid OLED adoption increases in smartphones and expands to other applications, and initial flexible OLED products get closer to release. These inflections create important growth opportunities for Applied over the next several years.
While we're paying close attention to current headwinds and driving efficiencies across the company, we remain focused on our long-term opportunities. I strongly believe that in the future, technology will play a larger part in many areas of our lives. Entire industries will be transformed by artificial intelligence, big data, and Industry 4.0. And at the foundation of those transformations are semiconductors. We're moving beyond a world of general purpose computing to specialized solutions that address new types of applications and workloads in the cloud and at the edge. And while the need for semiconductor innovation has never been greater, classic Moore's law scaling is challenged. Simply shrinking transistors no longer delivers simultaneous improvements in the power, performance, and cost of chips.
As I've said before, to unlock the full potential of AI and big data, we need a new playbook for semiconductor design and manufacturing, which will include new architectures, new 3D techniques, novel materials, new ways to shrink transistors, and advanced packaging techniques. All five of these areas require major advances in materials engineering and create tremendous opportunities for Applied Materials. To enable this playbook and accelerate innovation for our customers, we're making investments in new capabilities, creating entirely new types of products, and extending our engagements across the ecosystem. For example, we recently announced that we're expanding our long-standing technology partnership with IBM as a member of their new AI Hardware Center. We're also making good progress with our new materials engineering technology accelerator, which is on track to open later this year. The META Center will support deeper collaborations with system architects, chip designers, and the manufacturing community.
In addition to broadening our participation in the AI big data inflection, we're also building a more resilient company with diversified revenue streams. The portion of our revenue generated from sources other than new 300-millimeter semiconductor equipment sales is increasing. Combined, we expect our services, spares, upgrades, consulting, software and display, and flexible technology businesses to represent about 45% of total sales this year.
In Applied Global Services, our progress is fueled by our growing installed base and new advanced service products that help customers shorten ramp times, improve device performance and yield, and optimize operating costs. We grew AGS revenue more than 20% in fiscal 2018, and we anticipate high single-digit growth this year, even with wafer fab equipment spending expected to be down significantly. One reason for this is that more than half our service and spares business now comes from subscription-type revenues in the form of long-term service agreements.
Before I turn the call over to Dan, I'll quickly summarize. Given the elevated macro risks and a challenging environment in both the memory and display markets, our near-term outlook is one of caution. Despite these headwinds in 2019, we remain highly optimistic about the future. While we are taking steps to ensure our spending is aligned with short-term market conditions, we're focusing our investments on long-term opportunities. We're driving innovative new product development and building new capabilities that position Applied to play a bigger and broader role in the industry over the coming years.
Now, Dan will provide his perspective on our performance and outlook.
Dan Durn -- Chief Financial Officer
Thanks, Gary. Today, I will outline our financial strategy in the current environment, then summarize our Q1 financial results, provide our Q2 business outlook, and give you an update on our new META Center in New York. As Gary outlined, the end markets that our customers serve weakened during the quarter. As a result, our semi equipment customers are taking proactive steps to carefully manage capacity additions and reduce inventories. This sets the industry up well for 2020 and beyond. We continue to expect the recovery to be shallow and gradual, and we're still not ready to call the bottom of the current cycle. At the same time, it's important to put this year's spending into context.
Our WFE forecast for 2019 is still billions of dollars higher than the peaks of all the prior cycles. Today, our backlog remains healthy, our profitability is solid, we're generating strong free cash flow, and we're returning cash to shareholders. Most importantly, we see significant opportunities ahead, and we have the resources to make disciplined investments to secure technology leadership and growth. Our strategy is to navigate the current environment by carefully managing our overall expenses, fully funding our new product pipeline, and maximizing our recurring revenue.
Here are some specific examples. First, expense control. Our Q1 non GAAP opex was $750 million, including savings from our holiday shutdown, and only one month of our annual merit increase. In Q2, absent these same benefits, we're guiding our overall opex to be approximately flat sequentially. Next, R&D funding. Even in the current environment, we're investing more in R&D to strengthen and grow our new technology and product pipeline. Gary described how the industry needs new architectures and materials to enable better chips for AI. Later this year, we plan to introduce materials engineering solutions designed to accelerate the adoption of the next generation of memory chips, which will be highly enabling to cloud computing and the Internet of things.
Third, recurring revenue. Gary described how our services revenue should be higher in 2019, even as WFE declines. We expect the transactional portion of our AGS revenue to grow more slowly this year, as our customers work down excess inventories, but the subscription-like part of AGS should be higher year-over-year. In fact, in 2018, we grew the number of tools under comprehensive service agreements at three times the rate of new system shipments. So, we're doing a good job of delivering ongoing value to our customers across a larger portion of our installed base, which is the largest in the industry.
Next, I'll summarize our quarterly results. As a reminder, Applied adopted the ASC 606 standard for revenue recognition this quarter, using the full retrospective approach. Bear in mind, the differences between revenue recognized under ASC 606 and the old standard will fluctuate from quarter to quarter, but over time, they will offset each other, and the cumulative difference will be minimal. As we expected, the adoption of ASC 606 had a minimal cumulative impact on the company, increasing our retained earnings by about $6 million.
Now, to the results. In Q1, we delivered revenue that was slightly above the midpoint of guidance. Our non-GAAP gross margin and operating expenses were at the midpoint of guidance. We generated non-GAAP earnings of $0.81, which was $0.02 above the midpoint, including the impact of a slightly higher tax rate.
Turning to the segments. Semiconductor Systems revenue was $2.27 billion, and about one percentage point above the midpoint of our outlook. SSG's non-GAAP operating margin was 28.3%. Global Services revenue was $962 million, and two points above the midpoint of our guidance. AGS non-GAAP operating margin was 29.6%. Display revenue was $507 million, and one point above the midpoint of our guidance. The group's non-GAAP operating margin was 23.3%.
Turning to the balance sheet. We generated operating cash flow of $834 million, or 22% of sales. We returned $942 million to shareholders, including $750 million in buybacks. We ended the quarter with $5.3 billion in cash and investments, and $3.6 billion remaining in our buyback authorization.
Next, I'll provide our Q2 guidance. We expect company revenue to be approximately $3.48 billion, plus or minus $150 million. Within the outlook, we expect Silicon Systems revenue to be in the range of $2.15 billion, plus or minus $100 million. Services revenue should be $970 million, plus or minus $25 million. Our display revenue should be in the range of $340 million, plus or minus $25 million. We expect non-GAAP gross margins of around 43.5%, and non-GAAP opex of around $750 million, plus or minus $10 million. Non-GAAP earnings should be in the range of $0.62 to $0.70 per share. And our current non-GAAP tax rate expectation is approximately 14%. This is about two percentage points higher than our initial expectation for 2019. We've raised our rate expectation primarily to reflect the potential impact of new regulations proposed by the Treasury Department, along with our latest forecast for geographic revenue mix.
Now, I'll close with an update on the R&D capabilities we're creating at our META Center in upstate New York. Over the past quarter, we received approvals needed to begin receiving $250 million in public funding, which is being used to purchase and install Applied Materials systems and other equipment. We've now shipped our first systems to the META Center, which will be one of the most advanced R&D centers in the world. We're already engaged with multiple customers to accelerate breakthroughs in semiconductor technology, along with new applications of our materials engineering capabilities, and we're on track to be running wafers in the second half of the year.
Now, Mike, let's begin the Q&A.
Michael Sullivan -- Corporate Vice President
Thanks, Dan. Now, to help us reach as many of you as we can, please ask just one question at this time. If you have an additional question later, please pull the Operator, and we'll do our best to answer it later in the call. Operator, let's please begin.
Questions and Answers:
Operator
Ladies and gentlemen, at this time, if you have a question, please press the * and the number 1 key on your touchtone telephone. If your question has been answered or you wish to remove yourself from the queue, please press the # key. To prevent any background noise, we ask that you please place your line on mute once your question has been stated.
And our first question is from C.J. Muse from Evercore. Your line is now open.
C.J. Muse -- Evercore -- Analyst
Yeah, good afternoon. Thanks for taking the question. I guess, a two-part question. In terms of your overall guide by segment, it looks like you're suggesting roughly $3.55 billion a quarter in revenues. And I guess, is that math kind of in the ballpark of what you're thinking? And then, more importantly, how are you thinking about gross margin trajectory as we go through the year on the changing mix?
Dan Durn -- Chief Financial Officer
Thanks, C.J. Can I get you to repeat your first question? I didn't quite understand where you were going. The second part of the question is, as we look sequentially into Q2, you see the gross margin guide. Off of those levels into the back half of our fiscal year, we would expect to see incremental improvement into Q3, and then step up again into Q4. But I apologize. I didn't catch the first part of your question.
C.J. Muse -- Evercore -- Analyst
It was just adding up the different segment guide. And is it fair to say that roughly $3.55 billion is kind of what you're seeing on average on a quarterly basis for revenues through the calendar year?
Dan Durn -- Chief Financial Officer
Yeah. So, I don't think on this call, we'll be guiding for the full year. But what we do see into Q2 is $3.48 billion for the overall company revenue, plus or minus $150 million.
C.J. Muse -- Evercore -- Analyst
Great. Thanks, Dan.
Operator
Thank you. Our next question is from Atif Malik from Citi. Your line is now open.
Atif Malik -- Citi -- Analyst
Hi, thanks for taking my question. A two-part question for me as well. First, Gary, can you talk about what should we expect display mix between LCD and OLED this year? And then, is there any change to your view on the capital intensity of OLED TVs into next year, as some of the LCD makers are converting the LCD line to quantum dot and other flavors of OLED? And then, I have a follow-up for Dan.
Gary Dickerson -- President and Chief Executive Officer
Okay. Thanks for the question. Let me give you some overall color on the display business. And hopefully, I'll cover the two questions that you have. In the six years through 2018, we were able to grow the display business at a compound annual growth rate of around 25% to $2.5 billion last year. In 2019, we signaled incremental weakness on the last call. And the market has continued to weaken since that call. We now believe that the market is down around a third from 2018's record levels, with second quarter -- our second quarter to be significantly lower than our projected average run rate for 2019 and 2020.
Relative to the mix on -- what we have is the biggest incremental change since the last call is weakness in TV, delays in TV investments. It's still compelling for customers to go to Gen 10.5 panels, because you can produce eight 65-inch TVs versus three on Gen 8.5. So, it's strategically important for them to go and make that transition. But the timing of the investments are being pushed out. And then, going into 2020, we see small improvement in 2020. And we definitely like the longer-term technology trends and opportunities to grow the business. So, hopefully that gives you some indication around the mix. The biggest difference from our last call is in the TV market.
Operator
Thank you. Our next question is from Toshiya Hari from Goldman Sachs. Your line is now open.
Toshiya Hari -- Goldman Sachs -- Analyst
Hi, good afternoon. Thanks for taking the question. Gary, you talked about the EUV headwind, and the impact it had on your market share in 2018, and your expectations for 2019. Should we be concerned that it could remain a headwind into 2020 and beyond, or is there sort of an initial ramp-up view that's causing some of these issues for you? Thank you.
Gary Dickerson -- President and Chief Executive Officer
Yeah. I think, if you look at overall market share, third-party data is gonna come out in a little over a month, we'll all see the numbers, including our share. One thing that we'll see is that in the six years going into 2017, we were the only major supplier to be up or flat for six consecutive years. And certainly, what we said in 2018 is that our share will be down. Demand softened in the back half of the year. We saw push out to NAND, reuse in foundry, and overall spending mix shifted toward litho and areas we don't compete. What you will see in about a month is gains in areas like implant, epi, etch, gaining momentum in packaging. And also, in our process control business, I'm happy about the progress there. We had a record year. Very strong growth in our e-beam technologies. We may end up being number one in e-beam for the first time ever, and very well positioned with the additional adoptions of new products in 2019.
In 2018 and 2019, logic customers were buying EUV systems. And those systems have very long lead times. They're buying the EUV tools years before they go into high-volume manufacturing. We look at that as a positive indicator in the adoption of future nodes. But certainly right now in 2018 and 2019, it's definitely a headwind. And as we go forward, as NAND spending resumes, that's more material spending versus litho spending. That's certainly good for us. The trailing nodes are also not litho-dependent. So, that's also going to be good going forward. And then, another factor in 2019 that's a more favorable setup for us, we have a balanced share in foundry logic and memory. So, in a year where DRAM and NAND are much weaker, the relative setup for us is better in 2019.
And then, what we've talked about is over the longer-term, we see a very different picture emerging. It's clear, the industry needs a new playbook that goes beyond 2D scaling. And I deeply believe Applied is in the best position to enable the playbook. I meet all the time with customers, the leaders of R&D for our top customers, on a monthly basis. And this is a big focus for all of those customers. We've talked about five drivers of power, performance, area, and cost as 2D scaling slows, and all of those are dependent on breakthroughs in materials engineering. So, I would say longer-term, that creates a great opportunity for us.
Dan talked about, in his prepared remarks, new memory technology for AI that's coming later this year. I've talked about a 1,000X improvement in leakage current that improves power efficiency. Now, those are just early examples of the new playbook, extensive playbook that we've developed. And then, we've also talked about speeding up the new playbook by opening the META Center and figuring out how to integrate all this together so customers can move into their fabs. I definitely believe the right vision for the industry is material to systems 10 times faster, driving this new playbook. There's never been a time where it's more important. So, that's the playbook on how we're gonna move the needle for the industry and for Applied.
Michael Sullivan -- Corporate Vice President
Thanks, Toshiya.
Toshiya Hari -- Goldman Sachs -- Analyst
Thank you.
Operator
Thank you. Our next question is from John Pitzer from Credit Suisse. Your line is now open.
John Pitzer -- Credit Suisse -- Analyst
Yeah, good afternoon, guys. Thanks for letting me ask the question. Gary, as always, I appreciate all the detail you gave in your prepared comments. One of the things you mentioned is just the expectation that memory will be down significantly this year in calendar year 2019, which really shouldn't be a surprise to anybody. But I was wondering if you could just help us understand how your views differ between NAND and DRAM capex for this year, and whether or not you see either recovering in the back half of the calendar year? And I guess importantly, could you talk a little bit about what happens to your SAM in NAND as the industry transitions from 64 to 96 layers?
Gary Dickerson -- President and Chief Executive Officer
So, thanks for the question. Let me take first the market opportunity for us. There's no question, as customers increase the number of layers, it's all about materials intensity. And so, that creates a tremendous opportunity for us. We grew market share in memory a significant amount over the last five years. A lot of the improvements around new materials, new technologies that drive that scaling are really great opportunities for Applied. We are increasing our etch share also in memory. So, that's also a very good setup for us. So, certainly as the scaling goes forward, we expect that we're gonna continue to grow our share, as we've done over the last several years. And maybe, Dan, you can answer the question about DRAM versus NAND.
Dan Durn -- Chief Financial Officer
Sure. Thanks, Gary. And John, to get to how 2019 is profiling in the memory space, let me start with what we saw in 2018 and use that as a jumping-off point to make some comparative statements about how we see the market profiling in 2019. We're probably not gonna be point-specific on how 2018 ended up, because Gartner's going to come out in a month or two with those estimates. But we definitely saw 2018 up over 2017, definitely have a five handle on it. And as you indicated, it was a strong memory growth year. We think, as 2018 settled, 60% of the spend in the market was memory-related. About 40% was foundry/logic related. Within memory, we saw the NAND/DRAM spend very balanced.
As we look forward into 2019, in Gary's prepared comments, he said year-over-year, WFE in 2019 will be down. Memory will be down by a good amount. We expect foundry/logic to be flat to up a little bit. So, as 2019 shakes out, we expect foundry/logic to be greater than memory. Overall, the market will be down mid to high teens. And as we look at the market between NAND and DRAM, we see it profiling very similar to 2018 and being balanced.
In terms of the second half and comeback in the market, I think we want to set expectations for a slow, gradual recovery off of these levels. While we're having conversations with customers and we see positive lead indicators, we think it's prudent in this environment to set those expectations for a slow, gradual recovery. As we look into the back half of the year, inventory levels come down faster than we expect, utilizations come up, and price stability, those would all create the environmentals for a more robust second half. And if that scenario materializes, then we would benefit significantly from that environment.
And then, I wanted to come back to C.J.'s original question, because now I think I understand a bit of what he was asking for. And I apologize, C.J. Let me help shape the revenues this year to, I think, get at the question you were asking. Off of the levels we guided in Q2, we see our Semi Systems Group flattish on a quarterly basis into the back part of the year. The run rate of our display business in Q2 will be below the annual average. So, we would see -- expect to see that growing into the back part of the year. And then, AGS will have its normal seasonal profile and be higher into Q3 and Q4. So, hopefully, that helps giving you a bit of profile and color. And then, the gross margin part of your question, again, we expected that to incrementally step up in Q3 and again into Q4.
Michael Sullivan -- Corporate Vice President
Okay, thanks, John.
John Pitzer -- Credit Suisse -- Analyst
Thanks, guys.
Operator
Thank you. Our next question is from Harlan Sur from J.P. Morgan. Your line is now open.
Harlan Sur -- J.P. Morgan -- Analyst
Good afternoon, and thanks for taking my question. Can you just help us understand how you're thinking about the opex trajectory beyond Q2 if you do start to see gradual recovery as you describe it? And then, on the other hand, if revenues were to take another step down, let's say beyond Q2, how much could the team flex their opex?
Dan Durn -- Chief Financial Officer
So, opex is definitely a controllable spend line. The philosophy we have at the company is, is we're gonna be an inflection-focused growth company. We're gonna grow organically and invest in products and capabilities that will help drive that growth going forward. We do it in the context of the environment we operate in. We will be disciplined operators and instill spend discipline throughout the company.
As you take a look at the guide into Q2, what I would expect, if you take a step back and think about where we were a quarter or two ago, we had said we'd spend about $3 billion in opex in 2018. We would expect that to grow by about $200 million into 2019. We've adjusted those plans in light of the current environment we're in, and we'll probably bring that down by about $175 million over the course of 2019, off of the original expectations. So, up a percent, maybe a percent-and-a-half off of the levels we were in 2018. And we think this strikes the right balance, given everything we know, between near-term discipline that reflects the environment we operate in and strong pursuit of new technologies, new platforms, new winning products that will preserve shareholder value creation into the inflections that we see materializing in the years ahead.
Harlan Sur -- J.P. Morgan -- Analyst
Thanks, Dan.
Operator
Thank you. Our next question is from Pierre Ferragu from New Street Research. Your line is now open.
Pierre Ferragu -- New Street Research -- Analyst
Thank you for taking my questions. I just wanted come back to the point you made, Gary, about EUV being like a share gainer against you this year, but the leading indicator for you going forward. So, how much visibility do you have at this point in time on when the EUV gets introduced in mass manufacturing, how the share, I would say, of AMAT, of spending their wafer is evolving? So, that's one question. And then, the second question is, how much of the benefit you see on the back of EUV is just more of what you do already, and how much is actually new technology you're going to introduce as well, things like cobalt interconnect and others? Thank you..
Gary Dickerson -- President and Chief Executive Officer
Thanks for the question, Pierre. So, EUV, as I've talked about, you're seeing early adoption in 2018 and 2019. And in 2019, you're gonna see the first chips being built. So, you have pilot production. And when you're adopting the new technology like this, it happens years before you go into high-volume manufacturing. So, you'll see this initial adoption surge in advance of the high-volume manufacturing. And so, again, we do see that as a good leading indicator relative to N5, for instance, when that happens.
Now, one thing also to remember is that EUV will remove legacy etch and dep steps. I mean, that's why customers are adopting EUV, because it replaces a number of different etch steps. But those aren't our steps. So, at every node, the most important thing for the customers is they have to drive power, performance, area, and cost. And definitely, with power and performance, 2D scaling helps, but even more important is innovation in material. So, if you look at a node like N5, for instance, there are many materials inflections that are being adopted as customers drive improvements in power and performance. We have a number of different new steps there --advanced metal gate material, epi steps; we have hot and cold implants going from 500 degree C to minus 140; new surface treatments. We're increasing our share in critical etch steps, and have good momentum in new process control solutions. So, that is what will come for us. But what you see right now is this early adoption of EUV as customers prepare for those higher-volume ramps.
What I would also say, and I've talked about this many times, is I do believe that the industry needs a new playbook. We have stronger and deeper engagements than we've ever had with customers. So, that really positions us well. Relative to N5, we're well-positioned. We have deep engagements with customers to drive power and performance on N5, and also for future nodes.
And just the last thing I would add, when we talk about EUV adoption, the majority of the EUV is really in leading-edge technology and logic/foundry. You have half the market that's memory that's driven by materials; you've got about 25% of the market that's specialty nodes, power devices, image sensors, which also are great opportunities for us. So, we see in about 75% of the market, really great opportunities. And the leading-edge foundry and logic, it's really about power and performance, in addition to 2D scaling. And we're in the best position to drive that with our customers going forward.
Michael Sullivan -- Corporate Vice President
Thanks, Pierre.
Pierre Ferragu -- New Street Research -- Analyst
Thanks, guys.
Operator
Thank you. Our next question is from Krish Sankar from Cowen. Your line is now open.
Steve -- Cowen -- Analyst
Hi, guys. Thanks for taking my questions. This is Steve, calling on behalf of Krish. First one, if I could, Gary, on your Semi Systems business as it relates to China. Fully appreciate the ongoing U.S./China trade tension, and also given that there is that -- the one export control on one of your DRAM customers in China, I was just wondering if you had seen any spillover effects from those trade tensions and export control on some of your other customers, whether it's in terms of push-out in any ramp schedules, or perhaps even any increased focus or sourcing tools from local Chinese vendors by your Chinese customers as well?
Gary Dickerson -- President and Chief Executive Officer
Yeah. Thanks for the question. So, relative to China, from what we see today, it feels like mostly business as usual with our customers in the region. We're very well-positioned in China with domestic and multinational customers. We've been in China for 35 years, very deep relationships across semi and display. Just a little bit of color on China. We expect China wafer fab equipment investment to be down year-over-year in 2019 versus 2018. And we see both domestic and multinational down in China. In China domestic, we see higher spending on foundry/logic versus memory, with foundry/logic focused on trailing nodes, for sensors, IoT, those types of devices. Within China domestic spending, we're in a great position, and we expect that we're gonna gain share. And then, also our display business in China will be down, in line with our overall global display forecast. So, overall, we have a super strong position in China, Semi Service, display --great teams, strong relationships, and feel good about how we're positioned going forward.
Michael Sullivan -- Corporate Vice President
Thanks, Steve.
Steve -- Cowen -- Analyst
Great. If I could ask quick follow-up on 200-millimeter equipment demand. I think a number of foundries globally have talked about eight-inch wafer fab initiatives focused specifically on IoT automotive opportunities in the future. Is that something that will help equipment demand later this year? And should we expect to see those benefits on the systems side or on the AGS side? Thanks.
Dan Durn -- Chief Financial Officer
Thanks for the question, Steve. The trailing node geometries in general have been profiling very strong for the last couple of years, and 200-millimeter equipment demand is also the same. We continue to expect a healthy outlook for those mature nodes going forward. And the 200-millimeter equipment demand remains strong. Like you said, IoT sensors are proliferating and driving significant demand at those mature nodes. I would also say that there are new AI chip architectures that are being designed at the 28-nanometer node, and they're gonna deliver high performance. But to get the same transistor count out into the market as the seven-nanometer node, you need eight times the wafers at 28 nanometers. And so, the fact that we're getting new designs of highly capable silicon at nodes like 28 nanometers, I think bodes well for the trailing node market. 200-millimeter is experiencing the same type of dynamic and continues to be strong. From a financial reporting standpoint, we report our 200-millimeter equipment segment as part of our services, AGS reporting segment.
Steve -- Cowen -- Analyst
Perfect. Thank you, Dan.
Operator
Thank you. Our next question is from Timothy Arcuri from UBS. Your line is now open.
Timothy Arcuri -- UBS -- Analyst
Thanks a lot. I had two questions. Dan, I guess, the first one is, I'm looking at the gross margins guidance, 43.5. It's about the same as you were doing on like a billion dollars' lower revenue, sort of in mid-2016. So, my first question is, I'm just kind of wondering why gross margin gains are not really dropping through over that period. Is that because a lot of the incremental revenue is coming on the services side? And then I have a follow-up. Thanks.
Dan Durn -- Chief Financial Officer
Thanks, Tim. As we talked about historically, gross margin is gonna be a function of a number of factors. There's an aggregate revenue component; there's mix between our segments, and then product mix within segments, as well as overall activity levels in the factory, and they will vary from quarter to quarter. As we take a look at our guide into Q2, when we compare it to peak quarter, about a year ago, we're profiling favorably relative to our peers in the industry. And so, the company, we think, is doing a good job in a difficult environment, given the parameters we talked about that influence gross margin, and we're profiling, I think, favorably relative to peers in the industry, given that peak comparison. And you had a follow-up question, Tim?
Timothy Arcuri -- UBS -- Analyst
I did, I did. And yeah, I'm just trying to understand the change in the model. I think you said maybe six or seven months ago before WFE fell off, I think the feeling was that you would do roughly 3.25 annualized at 40 billion WFE. We're sort of even a little bit above that, right? Now, we're probably at 41 or 42. But even if you say we're at 40, you're sort of -- based on the guidance, you're at roughly 2.65 a year annualized. So, that's roughly 20% below where you thought, so a pretty big number. I'm just wondering sort of what's changed. Thanks.
Dan Durn -- Chief Financial Officer
Sure. So, here's what I would share with you and what we see. In the November quarter, we noted that 2019 was gonna shape up a lot like 2017, and that would give us an earnings per share a bit above $3.25. And since then, we've seen pre-announcements by end customers -- one company in the smartphones space, another one in the GPU -- and cryptocurrency continues to be weak. So, we've taken customer spending down in semi and display. And if you layer in what Gary said, down mid to high teens on a year-over-year basis, clearly, WFE spend is now below the levels we saw in 2017. So, my expectation is, is that earnings, not surprisingly, will be lower than they were in 2017. But I do like the way the customers are taking proactive steps to get supply in balance with demand, work down inventories in both memory and the logic/foundry space. So, I see the setup into 2020 as being quite good.
Operator
Our next question is from Vivek Arya from Bank of America. Your line is now open.
Vivek Arya -- Bank of America -- Analyst
Thanks for taking my question. A classification and a question. On the clarification, Dan, I was hoping you could give us some more color around the subscription versus transactional mix in AGS. So, let us predict how sensitive that business is to WFE versus your increasing base of deployed tools. And then, the question is, if I look at WFE over a longer period of time, it was in the low to mid 30s for many years, and then in 2017 and 2018. it jumped well above that trend to 50 billion plus. And now, this year, they are in the low 40 billion. What I'm trying to understand is, what is the right baseline level, that when we have, let's say, 2020 as a normal -- "normal" year, do we go off of the low 40s that we are right now or do we go off of the 50s? How do you conceptually think about modeling WFE growth over the next three to five years? Thank you.
Gary Dickerson -- President and Chief Executive Officer
Yeah. Thanks for the question. I'll start with the subscription question, and then turn it over to Dan. So, overall, our service business has grown about 15% compound annual growth rate over the last four years. In 2018, we grew over 20%. What I said in the prepared remarks is, we see high single-digit growth in 2019 in a soft market. And part of what helps us is exactly what you talked about, is this subscription revenue. We have a higher percentage over half of our business in subscription revenue with long-term agreements. And so, when you're in a soft market, those long-term agreements versus just selling parts makes a very, very big difference. That's been a conscious strategy on our part to create value for customers, drive more of these comprehensive service agreements.
If you look at 2018, the comprehensive service agreements grew three times faster than the rate of new shipments. So, we really changed that strategy around five years ago, relative to driving more long-term agreement, subscription type revenue. And even in 2018, it's still growing at a very high rate. It really comes back to creating value for customers, optimizing output, yield, cost. We've put a tremendous focus there. And again, we're getting a lot of traction. So, it's good for us, and also definitely good for our customers. And I'll turn it over to Dan for the next question.
Dan Durn -- Chief Financial Officer
Yeah. And Vivek, on the second part of your question, I think there's a couple of ways to look at it. If we take a longer-term perspective around WFE, and we look at it as a percentage of overall semiconductor revenue, and you go back to couple of decades to 2000, WFE as a percentage of semiconductor revenues was about 17%. This was a bit of a peak because our customers were investing in both 200 and 300-millimeter systems. And then, over the course of the next decade, as 300-millimeter cut in, all the factory automation systems and the way our customers consolidated and became more efficient in operating their footprint of capacity, you saw it come down to about 9% in 2013. Now that all the efficiency gains from 300-millimeter have worked their way through the system, 450 millimeters is not on the roadmap. In the last few years since 2013, that WFE intensity has climbed to 11%, 12%.
In an environment characterized like we're in now, where we see elevated inventory levels on both the foundry/logic side, as well as the memory side, and our customers managing, in a very disciplined way, supply to meet end market demand, we see those inventories come down. And so, I think it's a good setup for 2020. But, I don't think what happens this year forms the baseline, because we do think what's happening this year is shipping below true end market demand as these inventories come down.
Operator
Thank you. Our next question's from Joe Moore from Morgan Stanley. Your line is now open.
Joe Moore -- Morgan Stanley -- Analyst
Great, thank you. I wanted to follow up on the comment that you made about China spending being down and being a little bit foundry-oriented. There still seems to be quite a bit of desire to build a sovereign memory business, and we've seen a number of players talk about spending large amounts of money. What do you think it has to -- it's gonna take to sort of kick-start that effort, and is it a function of the technology being production-ready? Is it a function of the market environment, creating new spaces? What's the gaining factor behind that business starting to grow?
Gary Dickerson -- President and Chief Executive Officer
Yeah, thanks for the question. Memory technology, I think, you can see in terms of the 3D NAND ramp, is very difficult. Companies that have decades of experience, tremendous technology, deep experience, talent -- I mean, those customers had difficulty transitioning from 2D to 3D NAND. And certainly, DRAM scaling is extremely difficult right now. So, it just takes a lot of time to build that type of technology base. And you also need experienced talent across many, many different types of the skill set.
So, what we said before in terms of China is that China will definitely continue to incrementally spend, but it's going to be years before you see, if you look at cost per bit, any type of competitiveness on the leading edge is going to take a lot of time to develop the technology, to develop the talent. And in the meantime, again, in the foundry/logic area, there is a tremendous growth in sensors, IoT, trailing edge technologies. And we see rational spending there ramping in China. And again, that's more of the spending in 2019. So, again, we see increases, but as we've said before, we don't see a hockey stick. It's gonna take many years to build the talent and technology.
Michael Sullivan -- Corporate Vice President
Thanks, Joe. And Operator, I think we have time for two more questions.
Operator
Thank you. Our next question's from Patrick Ho from Stifel. Your line is now open.
Patrick Ho -- Stifel -- Analyst
Thank you very much. Gary, maybe just following up on some of the commentary you've made about EUV on this conference call, particularly for the leading edge foundry and the increasing litho intensity in the near-term. At the same time, as these leading edge nodes shrink to 10, seven, and five nanometers, we're seeing new materials implementation, stuff like cobalt for interconnects, and other new processes being brought on board. Can you discuss a little more specifically Applied Materials' capital intensity for its process segment, that even with EUV, you will continue to see increases for your business segments on a going forward basis for leading edge logic and foundry?
Gary Dickerson -- President and Chief Executive Officer
Yeah. Thanks, Patrick. As I said earlier on N5 -- really, for all the customers, every -- now, they're driving power, performance, area, and cost. 2D scaling is one of the ways that they're driving those improvements. And certainly, shrinking is part of that; pattern placement techniques to place patterns in the right location are also part of that, where we've said before, we expect our patterning revenue to grow. We've grown significantly over to last several years. We do still see, if you look across the whole industry, our patterning share to continue to grow for Applied Materials. And then, for power and performance, some of the things I talked about earlier in N5, gate materials, epi, implant, surface treatment technologies -- I'll tell you, the interfaces are getting very, very difficult. And so, when you look at how you improve power and performance, you're talking about a few atoms making a very big difference. In some cases, you take wafers out of one process chamber. Immediately, in a matter of seconds or minutes, you have moisture being absorbed into the films, oxidizing. That impacts device performance.
So, more of these integrated materials solutions will be the path in terms of how people drive scaling going forward. The 1,000X leakage current example I've given is, I think, a prime example of a huge improvement in power and performance, and that requires a combination of technologies on a platform where Applied has a significant advantage. So, those are the areas we're focused on. We have many deep conversations with a number of different companies. I meet on a regular basis with all of the R&D leaders. And really, that's the focus for us, and creates a big opportunity.
Michael Sullivan -- Corporate Vice President
Thanks, Patrick.
Operator
Thank you. Our last question's from Quinn Bolton from Needham and Company. Your line is now open.
Quinn Bolton -- Needham and Company -- Analyst
Hey, guys. Thanks for squeezing me in. Gary, I just wanted to follow up on the market share comments. Obviously, the mix shift toward EUV hurt supply. But if you look at the segments in which you compete today, what are your expectations for share gains? Are you flat to still gaining share in those segments? And then, a sort of second question is just, you talked about in the script, you're not yet ready to call the bottom. Just curious, what signs are you looking for before you're ready to call the bottom on the semiconductor side? Thank you.
Dan Durn -- Chief Financial Officer
Yeah. On the semiconductor cycle and calling the bottom, I think what we're looking to in the back part of the year, we've got conversations, deep conversations ongoing with customers. And while we like some of the positive lead indicators we're seeing, we still see inventory at an elevated level coming down. And if we were to see that come down faster than we're currently contemplating, utilizations rising, ASP stability -- I think those would be all good lead indicators that would look into the back half of 2019 and change the trend lines that we see. And again, if that is the scenario that materializes, we will benefit greatly in that environment.
Gary Dickerson -- President and Chief Executive Officer
I think on the market share question, certainly we're doing well in the areas we're competing. But we're driving to compete in more areas. There are certain areas where there are big TAM expansion opportunities. Those are areas that we're very focused on. And we've talked many times about inflection-focused innovation. There's no question the playbook is changing going forward. It's not all about 2D scaling. So, whether it's in advanced logic; specialty nodes, like power devices, CMOS, image sensors; or scaling new memory technologies, all of those areas are areas that we're very focused on. They're all dependent on materials innovation. And we're driving major investments in those new products, and also new structures that enable that new playbook. So, that's a big focus for us, and we see it as a great opportunity.
Michael Sullivan -- Corporate Vice President
Okay. Thanks, Quinn. Any last thoughts, Dan, before we close it out?
Dan Durn -- Chief Financial Officer
Sure, Mike. Thanks. Just a couple of quick thoughts. First, I want you to know that while the environment is challenging, we feel very good about the structural WFE growth that we see in the years ahead. So, today, we're gonna do the right things that increase the value of the company. We will drive spend discipline throughout the organization while we're still investing. We're gonna invest in new products and new capabilities. And this is about winning, winning in new inflections that we know are going to play out in the growth years we see coming.
Second, even though we see some positive lead indicators based on conversations with our customers, we will resist the temptation to call the bottom. What we will do, though -- we're gonna stay close to our customers. We're gonna continue to be transparent, and we're gonna continue to be available to you. On that point, we've got the Morgan Stanley conference coming up in a little less than two weeks. I look forward to seeing many of you there, and both Gary and I at many other events throughout the rest of the year.
Okay, Mike. Let's go ahead and close the call.
Michael Sullivan -- Corporate Vice President
Okay, great. Thanks, Dan. And we'd like to thank everybody for joining us today. The replay of the call is going to be available on our website by 5:00 p.m. Pacific Time. Thank you for your continued interest in Applied Materials.
Operator
Ladies and gentlemen, thank you for your participation in today's conference. This concludes the program. You may now disconnect.
Duration: 58 minutes
Call participants:
Michael Sullivan -- Corporate Vice President
Gary Dickerson -- President and Chief Executive Officer
Dan Durn -- Chief Financial Officer
C.J. Muse -- Evercore -- Analyst
Atif Malik -- Citi -- Analyst
Toshiya Hari -- Goldman Sachs -- Analyst
John Pitzer -- Credit Suisse -- Analyst
Harlan Sur -- J.P. Morgan -- Analyst
Pierre Ferragu -- New Street Research -- Analyst
Steve -- Cowen -- Analyst
Timothy Arcuri -- UBS -- Analyst
Vivek Arya -- Bank of America -- Analyst
Joe Moore -- Morgan Stanley -- Analyst
Patrick Ho -- Stifel -- Analyst
Quinn Bolton -- Needham and Company -- Analyst
This article is a transcript of this conference call produced for The Motley Fool. While we strive for our Foolish Best, there may be errors, omissions, or inaccuracies in this transcript. As with all our articles, The Motley Fool does not assume any responsibility for your use of this content, and we strongly encourage you to do your own research, including listening to the call yourself and reading the company's SEC filings. Please see our Terms and Conditions for additional details, including our Obligatory Capitalized Disclaimers of Liability.
More From The Motley Fool
Motley Fool Transcription has no position in any of the stocks mentioned. The Motley Fool has no position in any of the stocks mentioned. The Motley Fool has a disclosure policy.
