U.S. Markets open in 59 mins

Minerals Technologies Inc (MTX) Q4 2018 Earnings Conference Call Transcript

Motley Fool Transcribers, The Motley Fool
Logo of jester cap with thought bubble.

Image source: The Motley Fool.

Minerals Technologies Inc  (NYSE: MTX)
Q4 2018 Earnings Conference Call
Feb. 01, 2019, 11:00 a.m. ET

Contents:

  • Prepared Remarks
  • Questions and Answers
  • Call Participants

Prepared Remarks:

Operator

Good day, everyone, and welcome to the Fourth Quarter 2018 Minerals Technologies Earnings Call. Today's call is being recorded.

At this time, I would like to turn the call over to Cindi Buckwalter, Head of Investor Relations from Minerals Technologies. Please go ahead, Ms. Buckwalter.

Cindi Buckwalter -- Vice President, Investor Relations and Corporate Communications

Thank you, Paula. Good morning, everyone, and welcome to our fourth quarter 2018 earnings conference call. Today's call will be led by Chief Executive Officer, Doug Dietrich; and Chief Financial Officer, Matt Garth. Following Doug and Matt's prepared remarks, we'll open it up to questions.

I would like to remind you that beginning on Page 13 of our 2017 10-K, we list the various risk factors and conditions that may affect our future results. I will also point out the safe harbor disclaimer on this slide. Statements related to future performance by members of our team are subject to these limitations, cautionary remarks and conditions.

Now, I'll turn the call over to Doug. Doug?

Douglas T. Dietrich -- Chief Executive Officer

Thanks for the introduction, Cindi, and good morning, everyone. Thanks for taking the time today to join us as I walk you through our results for the fourth quarter and the full year of 2018. I'll give you my insights on the past year, along with our key achievements, and then Matt will provide more details on our financial results and outlook for the first quarter of 2019. With that, I'll conclude with my perspective on 2019 and the most notable trends we're seeing across our businesses.

Put 2018 in perspective, what we're most encouraged about is our team's ability to advance our growth strategy and deliver strong financial and operating performance while having to contend with a number of challenging conditions. Our performance this past year, testament to our continuous improvement culture and to the MTI employees who are the backbone of it. Alignment of our entire organization behind our culture, values and performance objectives have been instrumental in expanding MTI's leadership positions in many key markets, product lines and geographies.

Now let me take you through some of the highlights of the fourth quarter. We delivered earnings per share of $1.17, 6% increase compared to last year. We achieved 5% EPS growth for the full year. Total sales for the quarter increased 4%, marking our sixth consecutive quarter of sales growth. I'll provide more details on my full year remarks on what's driving our growth and our confidence in the trend continuing.

Sales in the Minerals businesses grew 3% in the fourth quarter, much of this driven by our Performance Materials segment, which grew sales by 6%. Despite the recent slowdown in the China automotive market, Metalcasting business drove higher volumes of greensand bonds across Asia and North America, resulting in a 6% sales growth.

Household and Personal Care sales increased 50% with a contribution of Sivomatic, continued solid growth of our Pet Care products in North America and Asia. Performance in our service businesses were solid as well, sales growing 6%, driven primarily by higher volumes of refractory products, supported by strong steel market conditions.

Total operating income for the quarter was $64 million, and we delivered double-digit operating margins across all segments. Cash flows were also strong with the fourth quarter being our highest cash generating quarter of the year. Key takeaway for the fourth quarter as well for the year is our ability to tightly manage what was in our control.

Higher raw material, energy and logistics costs persisted through the fourth quarter. However, our pricing actions and operating performance, driven by strong productivity improvement and tight expense control, allowed us to more than offset these inflationary costs in the fourth quarter, as well as for the second half of the year. As I mentioned, we continue to make progress on our growth initiatives, I'll talk about more details shortly.

Here is a chart that shows our quarterly EPS performance for the last several years. As I mentioned earlier, our EPS for the fourth quarter was up 6% compared to 2017, continuing our earnings growth trend.

This chart shows our full year earnings trend. 2018 marked the ninth consecutive year of record earnings for MTI, a reflection of our Company's ability to successfully execute on opportunities as well as navigate the challenges faced over the past several years.

Before getting into specific highlights and how we achieved our top and bottom line results, I'd like to provide a brief overview of 2018. Challenging year, but I'm proud of what we achieved and the resiliency our team showed. Foundation, business fundamentals and key growth drivers are on solid footing.

Sales increased 8% over last year to $1.8 billion, a record sales level for the Company, and our earnings per share grew 5% to $4.84. Sales in all four of our segments increased during the year, and we made significant progress on all three facets of our growth strategy: geographic expansion, new product development and acquisitions.

From a geographic expansion standpoint, Asia continued to be a strong growth region for us, given the large market opportunities we have there in Paper PCC and Metalcasting. These are two product lines I've highlighted on previous calls and for good reason. They continue to provide attractive near and long-term expansion and penetration opportunities to drive growth.

Over the past two years, we've secured contracts for over 400,000 tons of PCC capacity, 165,000 tons of which was secured during the past year. Our penetration strategy for Metalcasting in Asia also continues to progress. Sales in the region up 7% over last year. As I've mentioned in the past, we have significant growth prospects for our Metalcasting business in Asia. I'm encouraged with how we've been able to leverage our deep technical expertise and value proposition to capture new opportunities with foundry customers in the region.

Geographic expansion is occurring throughout Asia as well as other regions and across multiple product lines. I'll highlight a few places. We saw double-digit sales growth in India, Turkey, Indonesia and Thailand. India led the way with sales up 24%, driven primarily by Metalcasting; sales in Turkey were up 14%, driven by both Metalcasting and Refractory; Indonesia sales grew 21% as a result of increased Paper PCC sales; and sales in Thailand were up 11%, driven by both Metalcasting and Household and Personal Care.

Second aspect of our growth strategy, innovation and new product development, has always been a key focus area for MTI. Our actions to drive accelerated new product development are paying off. We have a robust pipeline of innovative value-added products that continues to be strengthened as we better leverage the voice of our customers, emphasize speed of development and utilize standardized processes.

Past year, we commercialized 35 new products and increased the speed of development by 21%. Products have the potential to deliver over $100 million in revenue. Additionally, the amount of revenue we generated in 2018 from our new product pipeline increased 13% over last year. We continue to improve the speed of our development and the revenue derived from our new products; highlighted many of our new products throughout the year, such as the launch of (inaudible), ENVIROFIL and variations of our new yield technology. Created these specifically to meet the demands of our customers who require environmental, sustainable and recycling solutions.

And lastly, we also executed on the third part of our growth strategy, acquisitions, through the addition and successful integration of Sivomatic. Sivomatic met all of our M&A criteria and is an excellent strategic fit with our Company. Doubled the size of our cat litter business, expanded its global reach, brought additional premium products to our portfolio and increased our bentonite mineral reserves around the world. Sivomatic is performing above our expectations, and we see additional opportunities to leverage it and extend our global cat litter reach.

Purchased the company, integrated it and largely paid down the acquisition debt in the six months' time frame is a clear indicator for our financial and operating capability to grow inorganically.

Turning to our operating performance, we had a strong year. We overcame difficult mining and operating conditions in the first half of 2018, ended the year with a 6% overall productivity improvement, which is the ninth consecutive year of achieving 5% or higher. We also maintained tight control of our costs, holding them flat over 2017 while absorbing the full Sivomatic overhead.

We've discussed throughout the year, a number of external dynamics weighed on our business and margins, most significant of which was rising raw materials, logistics and energy costs; took decisive actions to mitigate each of these, including diversifying our raw material sources, utilizing our internal logistics capability, leveraging our close relationships with suppliers, reducing costs and increasing prices. Initiatives began to take hold in the middle of the year. We finished 2018 on an upward trajectory with our performance more than offsetting these inflationary pressures.

Situation during the year played out as we described it would with margins improving in the second half. There were other external factors, such as tariffs, currency fluctuations and rising interest rates, all of which our organization successfully navigated.

Our continuous improvement culture is the foundation of MTI and its importance to driving performance couldn't have been clear during the last year. Our employees across the globe demonstrated their deep level of engagement. They were instrumental in helping MTI solve the challenges we face through suggestions to reduce costs, as well as hosting kaizen events designed to remove waste from our processes, all of which helped drive productivity improvements and expense reduction. These efforts by our employees across the Company underscore how we can successfully leverage our operating platform and mitigate pressures on our performance.

Shifting to the capital deployment activities in 2018, we maintained a strong balance sheet through our disciplined approach to capital allocation. Free cash flow grew 9% over last year, excluding the tax efficient pension contributions we made, and we deployed that cash in a balanced manner. $76 million of this cash was used to fund high-return organic opportunities as well as to maintain and improve the performance and safety of our facilities. We used a portion of our cash to acquire Sivomatic and also returned $29 million to our shareholders through share repurchases and dividends.

All in all, 2018 was a solid year for MTI. Though we faced some distinct challenges in our operating environment, I am proud of what our team accomplished, especially on the growth, cost reduction and continuous improvement fronts. We've laid the foundation for profitable growth and operational improvements heading into 2018 -- 2019.

With that, let me turn it over to Matt, who will take you through our financial results and outlook in more detail. After Matt's remarks, I'll come back and conclude with what we're currently seeing for 2019. Matt?

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Thanks, Doug, and hello, everyone. I'll review our fourth quarter and full year results, the performance of our four segments and also provide you with our outlook for the first quarter. Fourth quarter sales grew 4% versus the prior year, or 5% after adjusting for foreign exchange. Our sales growth was driven by higher pricing and higher volumes across several product lines, as well as the acquisition of Sivomatic.

Gross margin was 25.2% of sales versus 26.5% in the prior year, as we continue to face higher raw material, freight and energy costs. We'll detail for you in a few minutes how we are strengthening our margins and advancing on recovering inflationary costs.

In the fourth quarter, we reduced both the absolute and percentage SG&A year-over-year, including the addition of Sivomatic overhead. SG&A costs were 10.9% of sales in the quarter, a 100 basis point reduction from the prior year. As the operating income bridge shows, profitable growth and the actions we have taken on price, productivity and expenses, generated $13.5 million of business performance, which more than offset $12.3 million of cost increases in the fourth quarter.

Overall, operating income increased 2% versus the prior year to $64.1 million. Earnings per share grew 6% to $1.17, driven by the solid operating performance as well as a lower tax rate. Reported earnings per share were $1.22, a difference of $0.05 per share. It's primarily due to a one-time benefit from adjustments related to the US tax law change.

Let's move to the full year. For the full year, sales grew 8% to $1.8 billion, driven by growth across all segments. Notably, Metalcasting sales grew 12% on higher volumes of greensand bonds in North America and continued penetration in Asia. HPC sales grew 47%, primarily due to the contribution of Sivomatic, higher pet care revenue in both North America and Asia and increased European fabric care sales. Refractory segment sales grew 12%, driven by higher refractory product volumes in North America and Europe as well as higher pricing.

Gross margin for the full year was 25.6% versus 27.9% in the prior year. As we've previously discussed, higher raw material, freight and energy costs were the primary drivers of the year-over-year margin decline. SG&A as a percent of sales was down 90 basis points, as we managed expenses tightly throughout the year. Operating income was 2% lower than the prior year, driven by $41.4 million of inflationary cost increases. We mostly offset these increases with $37.1 million of business performance, which includes necessary pricing actions.

Operating margin was 14.4% in 2018, 140 basis points lower than the prior year. Revenue associated with cost pass-through diluted margin by 30 basis points, while the net of inflationary costs and higher business performance reduced margin by 110 basis points. This margin dilution is reversing, as our pricing actions are overcoming costs, and we expect margins to improve over the course of 2019. And lastly, earnings per share for the full year grew 5% to $4.84, which is a record performance for the Company.

Now let's take a closer look at how we are recovering inflationary costs. As you're aware, we faced significant increases in raw material, freight and energy costs throughout the year. The major raw materials that impacted our businesses were lime and Paper PCC and magnesium oxide in Refractories. Freight rates and truck and rail availability impacted logistics costs across our businesses and higher energy rates impacted production and mobile equipment fuel costs.

As shown by the red bars in the chart, we experienced significant cost inflation in the first half of the year, which accelerated by $9 million in the second half. The green bars in the chart show that our business performance lagged the inflationary cost increases in the first half. However, with improved pricing, some of which was contractually lagged, productivity and profitable sales growth, business performance increased by $17.1 million in the second half and exceeded the higher inflationary costs that we faced. Looking ahead, we are diligently managing what is in our control, driving pricing, productivity and cost control, all of which will help us advance our margins.

Now let's review the Performance Materials segment in more detail. Performance Materials sales increased 6% in the fourth quarter compared to last year. Sales improved on 6% higher Metalcasting and 50% higher HPC sales due to the contribution of Sivomatic and increased pet care sales in North America and Asia. This growth was partially offset by lower sales in Building Materials resulting from fewer large projects and a decrease in Basic Minerals due to prior year bulk chromite sales.

In the quarter, the business absorbed $4.2 million of higher raw material and logistics costs, which we more than offset with $5.3 million of higher pricing, productivity, cost control and the full integration of Sivomatic. Segment operating income increased 4% to $29.2 million and operating margin was 14.1% versus the prior year of 14.4%.

Looking to the first quarter, pricing actions will largely mitigate continued logistics and energy inflation. Also, HPC will benefit from continued strength in pet care and fabric care markets, while building materials and environmental products will experience typical seasonality.

In Metalcasting, we're seeing a slowdown in China automotive production, which is impacting our customers' casting production volume. However, we still expect positive overall growth in our Metalcasting business in China, driven by further penetration of our value-added greensand bond products. We're also seeing some casting production shifting from China to Southeast Asia and Europe as a result of global tariff changes. And in addition, the US foundry market continues to be stable.

Overall, our global Metalcasting footprint positions us well to pick up these geographic shifts in volume. Now for the segment, we expect operating income in the first quarter to be similar to that of the fourth quarter.

Let's turn our Specialty Minerals segment. Specialty Minerals' fourth quarter sales were down 1% year-over-year at $142.5 million. In PCC, 2% growth in Asia and 3% higher specialty PCC sales partially offset the previously announced paper machine shutdowns in North America. Processed Minerals sales were flat versus the prior year, as sales to the automotive industry remained strong, while sales to the construction markets in the US and Europe were slower. Segment operating income was $21.9 million, down $1.4 million from last year. Segment faced inflationary cost increases of $4.1 million, driven by higher energy and lime costs, which we partially offset with $2.8 million in business performance.

As I mentioned last quarter, we absorbed higher lime costs in the fourth quarter and we will recapture with contractual price increases in the first quarter. However, we are seeing higher lime pricing continuing into 2019 and we will be recapturing these costs on our typical lagged basis.

Turning to the first quarter, we expect lower volume in North America and continued growth in Asia. A recent announcement of the closure of the Georgia-Pacific Port Hudson facility, however, will impact Paper PCC volumes in North America starting in the first quarter of 2019. Based on our analysis and customer feedback, we do expect a portion of these paper volumes to eventually be absorbed by other producers where we have satellite facilities.

We will continue with pricing actions to recover higher energy and logistics costs, and we expect more moderate growth in our automotive markets. Typical seasonality will impact construction activity, with sales expected to pick up in the spring. For the segment, we expect operating income to be $1 million lower than the fourth quarter, primarily due to the lower volume in North America.

Now, let's turn to our Refractory segment. Refractory segment sales increased 9% in the fourth quarter and operating income increased 6%. Refractory product sales were up 14% on continued strong steel utilization rates and higher pricing. This segment faced $19 million in higher raw materials and energy costs over the course of 2018, primarily driven by magnesium oxide and other refractory raw material increases. Despite these challenges, Refractories achieved record operating income for the full year due to a proactive sourcing strategy, value-added product substitutions for our customers and necessary pricing actions.

Now, looking to the first quarter, we expect continued strong conditions in North America. However, we are seeing signs of slowing steel production in Turkey. And in addition, while we expect another strong year for laser measurement equipment sales, we plan to deliver fewer units in the first quarter. Therefore, we expect operating income to be lower by $1 million sequentially.

Let's move to Energy Services. Energy Services sales were slightly lower in the fourth quarter compared to the prior year and $1 million higher sequentially. Operating income grew to $2.3 million, as offshore market activity has moderately improved and we are participating in larger longer-lasting jobs. Operating income in the first quarter is expected to be similar to the fourth quarter, and we see a healthy pipeline of projects for the first half of 2019, particularly in filtration equipment sales.

Now, let's review our liquidity and debt highlights. We continued to generate strong cash flow in 2018, and we deployed our cash in a balanced way across internal investments, the Sivomatic acquisition, debt repayment and returns to shareholders. Cash from operations was $204 million in the year. This included $15 million of incremental discretionary pension contributions that we made to take advantage of a one-time tax savings opportunity.

We deployed $76 million of capital expenditures, spread across high-return projects, sustaining our operations for future profitability and environmental health and safety projects to ensure a healthy and safe environment for our employees and other stakeholders. We acquired Sivomatic for $123 million using both cash on hand and debt. We also repaid $80 million of associated debt to end the year with a net leverage ratio of 2.2 times EBITDA. Finally, we returned $29 million to shareholders through share repurchases and dividends.

Total liquidity for the Company remains strong at $413 million, comprised of cash and equivalents of $213 million and $200 million available capacity on our revolving credit facility. Our balance sheet remains strong, and we have the liquidity to continue our balanced approach to capital deployment.

Now, let me summarize what we expect for the first quarter. In Performance Materials, we expect our actions around pricing, productivity and cost control to offset logistics and energy inflation. In Specialty Minerals, we expect continued growth in Asia and contractual price adjustments related to lime increases in 2018. We'll also take additional pricing actions as inflationary cost increases continue. We expect operating income to be $1 million lower sequentially due to a combination of higher lime costs and the volume impact of the Port Hudson closure.

For the Refractories segment, we expect strong conditions in North America and Europe to continue. We expect operating income to be $1 million lower sequentially due to softness in the Turkey steel market and the timing of laser measurement equipment sales.

For Energy Services, we expect a similar level of offshore activity. Cold snap in the US is expected to result in supply chain delays and increased logistics costs. And in addition, foreign exchange translation is expected to be unfavorable relative to prior periods.

In total then, first quarter earnings per share is expected to be around $1.10. While we are seeing a slower start to the year, we expect the growth opportunities we have created to deliver another year of solid earnings' growth for MTI.

Now I'll hand it back over to Doug for our perspectives on the year ahead.

Douglas T. Dietrich -- Chief Executive Officer

Thanks, Matt. Before moving to Q&A, let me provide some high-level themes on the year ahead. First and foremost, our team is energized, focused and prepared to build on the momentum in 2018; continue to pursue our growth strategy; strengthen and deepen the value realized from our operating culture; and execute on the opportunities we generated last year. Global economic backdrop that we face in 2019 is different from what we experienced in 2018.

From a macro perspective, we're seeing slowing growth rates in China, as well as more modest growth rates in Europe. However, we still expect relatively positive markets in the US across most of our product lines. Within this backdrop, we are confident in our ability to advance a number of key growth drivers that I've discussed today.

Paper PCC expansion strategy in Asia will continue to build momentum with the addition of 300,000 tons of capacity coming on line, driving volume growth later this year and into 2020. In addition, we have a robust pipeline of satellite targets and new technology opportunities globally and expect to secure additional Paper PCC contracts this year.

In our Metalcasting business, we anticipate another solid year and expect overall volumes to continue to grow in China, primarily through strong penetration of our greensand bonds, the significant opportunities to grow our global pet care platform through increased demand for our products, and by leveraging the Sivomatic business to expand our market position. And we'll be exhilarating our new product development and commercialization efforts geared toward providing our customers higher-value solutions to address the needs.

There will be some cost inflation challenges in the year ahead. But as we demonstrated last year, our strong operating performance, along with the necessary pricing actions and cost control measures, will drive continued margin improvement throughout the year.

MTI is entering 2019 with strong alignment on all fronts. We're aligned on our strategy and objectives, and we're focused on building MTI for the long-term profitable growth, strong earnings and high returns for shareholders. We're a company to be counted on in all parts of the economic cycle for our strong operating culture, a solid balance sheet and our ability to closely control costs. All of this gives us confidence that 2019 will be another year of profitable growth for MTI.

With that, let's open the call for questions.

Questions and Answers:

Operator

Thank you. (Operator Instructions)

And our first question will come from Daniel Moore with CJS Securities.

Daniel J. Moore -- CJS Securities -- Analyst

Doug, Matt, good morning. Thanks for taking the questions.

Douglas T. Dietrich -- Chief Executive Officer

Hi, Dan.

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Good morning.

Daniel J. Moore -- CJS Securities -- Analyst

I want to start out, I guess, kind of the bridge between the two -- the Q1 guide and, Doug, the more optimistic sort of outlook for the full year as we look into '19. Earnings growth has lagged top line growth for a few quarters. That reversed here this quarter, but it looks like you won(ph)a few challenges once again. So you talked in general terms about continued operating expansion in the coming year. What are the puts and takes that you see and what kind of range of sort of pre-tax or EBIT margin expansion do you think is reasonable to think about for fiscal 2019?

Douglas T. Dietrich -- Chief Executive Officer

Yes. I think to answer the first part of your question, Dan, first piece of it was, look, we are seeing a little bit of a slower start to the year. Got a couple of challenges just recently actually with some of the cold temperatures freezing up some logistics, and we're working through that right now. We expect that might be a little bit of a cost to us in the quarter. But we did see some, right out of the gate in the first couple of weeks of the year, some slower pull from some of the markets. We don't see that that's going to continue.

Foreign exchange, Matt said that over the past several quarters, that started to become a little bit more of a drag, but -- so we think it's a little bit slower start to the quarter and the guidance we gave, but what I'm trying to contrast there is we've got a lot of things coming at us for the rest of the year. The pricing actions that we know will take hold. We're building. We have some expansions that came online. We see some strong pull from customers in our newest products. Some of our new commercializations that were -- new products commercialized late last year that we feel had some good traction moving into the year. Later this year, 300,000 tons of capacity in Paper PCC is going to be coming online. So there's a number of kind of forward, upward momentum that we started last year that will continue to take hold through the year that we think will offset kind of the slower start and continue to drive those earnings.

As far as margins, we think at a normalized rate, this company -- certainly at 15%. Can I tell you that that's going to happen this year? I think as we see costs continue to go up, Matt mentioned, contractually, we're going to lag a little bit that. We see they might plane over toward the second half of the year and I think we'll catch up. I think as we get to kind of average pricing, those normalized margins will get back to 15%.

So do I see the end of our cost inflation? No, I haven't seen it yet. I think that's going to continue through the first half. But should that go over? I think we'll start -- with our pricing actions, operating cost structure, we'll get back to that kind of normalized rate of 15%.

Daniel J. Moore -- CJS Securities -- Analyst

Very helpful. The Port Hudson, with the impact of the closure, can you give us a sense for both Q1 and full year '19, either tons and/or revenue on a year-on-year basis?

Douglas T. Dietrich -- Chief Executive Officer

Sure. I think last year, that facility -- over the past couple of years, has probably bounced between 70,000 tons, 80,000 tons of PCC. What we know now is that that's going to start to ramp down this quarter, I think probably late February, March. That will impact the quarter, as Matt mentioned. We do though -- one of the things that's interesting about this is, with operating rates -- this closure came with operating rates in North America in the low 90s, around 90%. Typically, we see a closure like that, as you've seen in the past -- you'd see something when the operating rates dip below around 80%. So this one is a little different.

And what we are feeling right now is some pull from customers -- PCC pull from other customers, and that gives us an indication that this paper is probably going to shift around. We're not exactly sure of that yet. We don't have any indication of exactly where, but we're getting some customer -- higher customer pull from PCC in other facilities, which leads us to believe that probably some of this will be absorbed elsewhere and most likely where we have some facilities. I can't give you the full impact on the year, but that's the range it was in terms of total tons for last year.

Daniel J. Moore -- CJS Securities -- Analyst

Very helpful. Understood. And then maybe one more and I'll turn jump back to queue. In terms of just looking back to the quarter, basic materials, are we through now with the tough comps as far as chromite is concerned? Do we have any revenue in Q1, Q2 of 2018? And besides chromite, was there anything else that sort of contributed to the decline in Q4, maybe a little sharper than what we've experienced over the last few quarters?

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Dan, you characterized it the right way. We are done with bulk chromite impacting us on the revenue and on the operating income line within basic minerals. So you won't see that going forward. In the quarter, it did have a little bit of a drag, as I spoke to, but on a go-forward basis, fully out.

Daniel J. Moore -- CJS Securities -- Analyst

Perfect. Understood. Thanks for the color.

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Beyond bulk -- sorry, I just remembered you asked anything else (inaudible) place in basic minerals. Beyond bulk chromite, what you have in the other parts of Performance Materials, you do have some drilling fluids that go into the Permian basin for the energy markets. And you are starting to see, with a little bit of a drilling slowdown and some of the rig counts coming down onshore, that some of our business may be slowing a bit related to drilling muds in the energy sector.

Daniel J. Moore -- CJS Securities -- Analyst

Got it. Okay. Thank you again.

Operator

And moving on, we'll go to Silke Kueck with JPMorgan.

Silke Kueck -- JPMorgan -- Analyst

Hi. Good morning, how are you?

Douglas T. Dietrich -- Chief Executive Officer

Hi, Silke.

Silke Kueck -- JPMorgan -- Analyst

I was wondering whether you can identify what the magnitude of price increase was this quarter and how much freight pass-through contributed to sales? And also what the magnitude of like the Sivomatic acquisition was on sales this quarter?

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

When you step through the bridge on the 4% increase, you did have that FX that went against us about a 1%. Pure price pass-through related to freight and lime was about 1 percentage point. And then you had other pricing that we were driving, which was about another 2 percentage points. The remainder of that is really the net from lower bulk chromite sales and the addition of Sivomatic in the quarter.

Silke Kueck -- JPMorgan -- Analyst

Okay.

Douglas T. Dietrich -- Chief Executive Officer

So total Sivomatic sales for the year included in our results is about $62 million. It's only nine months, eight months, it was. So on an annualized rate, it's about 4% higher than what we had described when we purchased the company back in April. So that gives you a rate. That's why we're saying Sivomatic is really performing well for us. It's still growing sales, and we've seen strong performance out of it for the eight months that it has been the part of the Company.

Silke Kueck -- JPMorgan -- Analyst

Secondly, what's your total PCC production capacity? How many tons did you make in 2018?

Douglas T. Dietrich -- Chief Executive Officer

Capacity or tons?

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Yeah.

Douglas T. Dietrich -- Chief Executive Officer

Yes. We're selling around 300 million tons, I think, in total for the year of capacity. We generally run pretty high-end in that capacity. We're probably -- 85%, 90% is typical. We make sure that we have enough room in there for high-filler technologies when we deploy them. We have enough room for customer growth and expansions. And also some of that is just an efficient capital deployment. So when we build the facility, we have -- half of a carbonator you are putting it in. So we run about 85%, 90% total of capacity. I can't give you exact capacity number, but that's around it.

Silke Kueck -- JPMorgan -- Analyst

Okay. Helpful. And lastly, yet again, the SG&A cost, you managed very well, given all the headwinds and given the acquisition. Do you think you have the right headcount or do you think you may need more people to grow the business as you expand the (inaudible) offshore with respect to foundry for Metalcasting in China and India and other opportunities?

Douglas T. Dietrich -- Chief Executive Officer

Yeah. The question you're asking, do we have the right headcount? I think we've not held back on headcount required to ensure that we're efficiently growing sales, producing our products, innovating, et cetera. That said, we're always looking for opportunities. And I don't want to call it just in heads, just in discretionary expenses. We're always looking for ways to leverage our platform that we have and the Company through shared services and our resource units. We want to make sure that sales deployment, as we grow, that we are not -- we don't feel we need to incrementally grow that overhead fixed cost base. We put in a system to be able to leverage it and that's what we look to do.

How that ends up in number of heads? No, we're always looking at opportunities and making sure that they have the right horsepower and people power to make sure we secure it. So I can't really tell you whether we have the right or not, but we're -- in the context, we are open to making sure it's the right headcount for what we need to do and execute our strategy.

Silke Kueck -- JPMorgan -- Analyst

And a last question for Matt, if I may. Will you plan to continue your share repurchase program in 2019 to set(ph)a goal what you want to accomplish in terms of what you're going to return to shareholders? And do you have a free cash flow target in mind for 2019?

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Yeah, Silke. So if you recall, in 2018, free cash flow ended up being $128 million. But I'm going to go ahead and add back the discretionary pension contributions in my view. So that gave us about $143 million in overall free cash flow. With that, I think we detailed for you, look, we acquired Sivomatic, we paid down $80 million in debt, we returned about $29 million in shareholder value that included $22 million of share purchases. Those were done on an opportunistic basis, and we'll very much keep the opportunistic stance going forward.

Looking to 2019, we're targeting a higher level of free cash flow generation in that $150 million range and we'll continue to manage that with a very sound balanced approach, making sure that our balance sheet approaches our target level of 2 times net leverage against EBITDA, as well as funding strong investments within the Company organically, looking for inorganic opportunities and making opportunistic share repurchases and returns to shareholders.

Douglas T. Dietrich -- Chief Executive Officer

Yes, I think, just to add to that, we've always taken the approach that says internal MTI investments in growth are probably the number one focus of the Company, so steering our cash to organic opportunities around the world that makes sense, high return and also to maintaining our facilities.

We balance then -- keeping our balance sheet in the right spot. And as we see acquisition opportunities kind of move up and move down, come forward or wane, we look to opportunistically steer that capital as (inaudible) toward shareholders, and share repurchases are the mechanisms we use. So we're going to continue with that approach. We have -- what we see is, we meet regularly to talk about acquisition opportunities. I can't give you anything where we are in those, but it's healthy pipeline of things that we continue to look at. And as they move forward and they make sense for the Company, similar to type of acquisition like Sivomatic, we think that's a -- strategically that's where we see value to deploy cash. Outside of that, we can move it back to shareholders through share repurchases. Hope that helps you to frame it up.

Silke Kueck -- JPMorgan -- Analyst

Yeah. Thanks very much for your thoughts on that.

Operator

And next, we'll go to Steve Schwartz with First Analysis.

Steven K. Schwartz -- First Analysis Securities -- Analyst

Good morning, everyone.

Douglas T. Dietrich -- Chief Executive Officer

Hi, Steve.

Steven K. Schwartz -- First Analysis Securities -- Analyst

First question, just with respect to freight costs, I want to make sure I understand clearly when you talk about -- you mentioned in the prepared remarks higher rail, but I'm also wondering if the expansion in the growth you are seeing in Asia isn't also a part of higher freight costs? Or is that considered a completely different element within the discussion?

Douglas T. Dietrich -- Chief Executive Officer

No, it's part of it, Steve. I think the majority of our higher freight costs we've seen here in North America, partially Europe, we have seen a real tightness in being able to get trucks and rail freight increases just general across the board, and even specific types of trucks. We do use flatbed trucks here in the North American, and those of been particularly tight in 2018.

In China, freight costs were a piece of it, a little bit different kind of influence there, and that was a little bit of tightening of regulations in terms of weights on roads. And so, as we saw those regulations come through and lower loading levels of trucks that required more trucks and that more expense and that had to be purchased -- pushed through on a per ton basis. So that's same truck, fewer tons to the customer, and so it did increase our cost there, albeit a little bit smaller than what we saw in North America, but yes, we had to manage through that as well.

Steven K. Schwartz -- First Analysis Securities -- Analyst

Okay. Put it -- for the most part, those costs are regional. So in other words, it's not -- you're not talking about higher freight costs because the growth in the Asian business and pursuing that business is causing you to have to shift things farther at higher rates. There's nothing like that in this conversation, correct?

Douglas T. Dietrich -- Chief Executive Officer

Correct. We're largely localized, meaning we supply customers produce -- source, produce and supply customers largely within the same region. So we do shift bentonite around the world. We ship other projects around the world. But we highlighted on a call or two ago that those numbers are relatively small, less than 5% of kind of our sales. The majority is localized in region.

Steven K. Schwartz -- First Analysis Securities -- Analyst

Okay. Got it. And my second question, just with respect to your gross growth in the Paper PCC business, talk about the additional 300,000 tons coming on. Just wondering, from a gross growth standpoint, how much is are programs like FulFill and NewYield unusual adding to your growth as compared to the new facilities?

Douglas T. Dietrich -- Chief Executive Officer

Got you. Let me kick it off, frame it, and then I'll let D.J. talk a little bit more specifically about some of these technologies and the filler contracts that we're building -- our satellites are billing. Filler tons, obviously, hitting revenue, that's the volume. The revenue associated with those tons is different around the world. You'll see a lower per ton revenue sometimes in Asia regions than you will in North America and Europe, and that's just because the input costs tend to be a little bit lower, so lime cost in particular. So on a revenue basis, we sometimes like to talk in tons because that ton generates the same EBITDA around the world.

NewYield is a kind of per ton revenue. FulFill, we've always mentioned before, it's priced a little bit differently. It's more technology and technology fees, so that -- it's not necessarily revenue. It kind of drops right to the bottom line. So FulFill doesn't move the needle on revenue. It does move the needle in operating income. But I'm going to let D.J. talk to you about -- a little bit about what we're building and some of what's happening with NewYield in Asia and other parts.

D. J. Monagle -- Group President, Specialty Minerals and Refractories

Thanks for the question, Steve. Couple of things. So regarding the details on the 300,000, we've got the start-up in China with the Chenming Paper Company that'll be coming on line in the second half, coming toward -- in the second quarter. So first half, we'll be ramping up the facility in Indonesia. Those two make up -- and they are standard PCC. They make up the 300,000 tons. FulFill will be offered in both those locations, but probably not part of the ramp-up. We usually get things stabilized before the next level of technology goes in.

One of the other things that we had mentioned or alluded to during the third quarter call was discussions with -- expansions with folks. And so we've also been able to get agreement on somewhere between 25,000 and 50,000 tons that we'll be putting in India as expansions, and that's just part of us applying the latest technology and helping our customers grow in their use of PCC. So those will be coming on in the second half as well.

With regard to the other technologies like NewYield, and Doug had also mentioned ENVIROFIL in the past, both of those right now just have -- are being deployed one location each. But I will tell you, as I look at the pipeline that's going, we've got about a dozen or so satellites in the pipeline. A couple of them are in ENVIROFIL, a couple of them are NewYield, and the majority are still standard PCC, majority of that being in Asia, but we are seeing increased interest in these new technologies in South America, primarily Brazil, and getting some pull in Europe as well. So that's kind of how the pipeline is looking right now. Did that help?

Steven K. Schwartz -- First Analysis Securities -- Analyst

Yeah. That's very helpful. Just to keep all of these different growth elements in perspective with each other, so I appreciate that.

Douglas T. Dietrich -- Chief Executive Officer

Steve, I will add to that a little bit. D.J. mentioned, certainly, we see that opportunity to grow the base filler level. But we are seeing a lot more kind of interest in -- and it's what's feeding(ph)our new product development pipeline -- in more environmental sustainable recycling solutions. D.J. mentioned ENVIROFIL. That is a recycling solution. NewYield is a recycling solutions. We've got other -- in our Environmental Products business, we talk a lot about environmental solutions like FLUORO-SORB that's helping with waste water cleanup. We've got some low emission -- demand for low emission greensand bond products. So as with the casting process, the emissions are reduced. We see some of that pull from customers.

So I'd tell you, a lot of the 35 products and a lot of what's in the pipeline is geared toward helping those customers with these type of solutions and certainly leveraging our position on that paper mill. We're there every day, 24/7, and helping them expand where they have issues -- they are facing issues, water recycling and reducing fiber consumption with higher PCC. So I just gave you a flavor. That's not just in PCC, it's kind of across the Company where we're innovating in this way.

Steven K. Schwartz -- First Analysis Securities -- Analyst

Got it, and I appreciate that. Thank you.

Operator

And moving on, we'll move to Rosemarie Morbelli with G.research.

Rosemarie J. Morbelli -- Gabelli & Company -- Analyst

Good morning, every one.

Douglas T. Dietrich -- Chief Executive Officer

Hi, Rosemarie.

Rosemarie J. Morbelli -- Gabelli & Company -- Analyst

I was wondering if you could talk about the revenues for the quarter. It was below my expectations, and I am just wondering how it stood against your own internal projections, whether you were positively surprised in some areas and negatively in others?

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Rosemarie, as we went through the quarter, we generated 5% growth, adjusting for foreign exchange. It was very much consistent with, I think, how we were trying to look at the opportunities that laid against us and also consistent with what we were thinking about in terms of profitable growth over the course of the quarter on a year-over-year basis, and also trend line where we were for most of the year in terms of overall growth. And I think it lays the groundwork, and Doug will want to probably provide a little more detail, again, around the actions and activities we were taking in 2018, capturing some of those this year, laying the ground work for continued top line growth in 2019 as we look forward.

Douglas T. Dietrich -- Chief Executive Officer

Hi, Rosemarie. I think I will add to that. I don't think we were -- I think you were saying, are we surprised by it, and is this something -- is this a trend that's going to continue? What we're looking at right now, I think at the end of the year, sometimes it's a -- and Matt mentioned 5%, and that's a little bit below our kind of full year average of 8%. But at the end of the year, sometimes what happens is, especially in these markets, you do see some orders shift around. And not exactly sure when that's going to happen. I think it happened a little bit in PCC in China. We had one individual customer kind of slow down in the last two weeks of the year, but I will tell you that they're pulling strong as they get into the beginning of the year. That tells me there is a little bit of de-stocking going on, I think, in the construction, sometimes in automotive builds. We did see a slowdown in Metalcasting in China. I think that contributed to some of it. But again, I think, if you want to go into the full year -- and we're seeing a little bit of that persistent here in January, but we think, going into the full year with what we have in terms of big projects that we put in place, started last year that will be coming online, the pricing actions, the new volume, the new products and certainly with the PCC that will be coming on latter half, we think that that growth trend continues.

That said, we are seeing some softening markets. Do I think that 8% again is possible? I'm not sure right now. We think we can continue with our kind of mid-single digits growth throughout the year. Might be a little bit lower than last year, given where we are in China and with some of the softest we're seeing in Europe. But right now, we're pretty confident we can continue our growth trend.

Rosemarie J. Morbelli -- Gabelli & Company -- Analyst

That is very helpful. Thank you. And then, looking at the Metalcasting, yes, auto has slowed down in China. But on the other hand, you are working on substitution and gaining share versus the two parts, greensand or whatever it is called. I was wondering if you could talk about the success in substitution and whether you could grow faster than the overall market in that particular category?

Douglas T. Dietrich -- Chief Executive Officer

Yeah, let me start and I will let Jon Hastings take it through kind of the specifics. We mentioned that, yes, we think we see continued growth in China. We probably averaged 12% to 15% type of growth over the past three years. Given the base demand, it will probably be a little bit lower. China is still growing. It's just -- albeit slower in some of our casting products, and it's not just all automotive. But our penetration strategy has been a success and will continue to be this year, offsetting some of that slower base volume growth. Jon, do you want to -- how we do that and how we put resources to it?

Jonathan J. Hastings -- Group President, Performance Materials

Sure. Rosemarie, I'll echo a lot of the comments that Doug just made. Overall, the casting industry -- you can look at it in a couple of different ways. Automotive certainly has been impacted by changes in the tax policy and the lending practices. But the remainder, industrial and heavy equipment, seems to be a little bit more robust.

You asked about our blended product strategy, that does continue to work. What we're seeing is consolidations in the foundry industry. We are also seeing new investments in highly automated casting lines that are producing castings that are equivalent to the quality that we see in North America. In order to do that, those customers require high-quality, high-consistent products that we offer to our customers. As you know, we tailor our products specifically to the needs of each foundry, so we continue to innovate with them. And those products continue to be in fairly high demand. So as we get into 2019, although we don't expect a double-digit growth, we do continue to see the mid-single digit growth as we continue to penetrate with the blending strategy.

Douglas T. Dietrich -- Chief Executive Officer

And those blending products -- I'll just add, Jon mentioned, but from the base clay to the kind of engineered solution, that's a different profit profile as well. And so, though sales may be a little bit lower than last year or lower than last year, I do see that that will help our margin expansion. That's one of the elements that continues to drive margins higher.

Rosemarie J. Morbelli -- Gabelli & Company -- Analyst

Thank you. And if I may ask one last question before getting back on queue, I was wondering if you could talk about the growth of the pet business excluding Sivomatic?

Douglas T. Dietrich -- Chief Executive Officer

Sure. Jon, do you want to take that one as well?

Jonathan J. Hastings -- Group President, Performance Materials

Yeah. So certainly, you know the Sivomatic story, but in North America, we continue to grow as well. What we have found is that now that we have a premium position in both Europe and North America, we've got a lot of customers that are asking to expand business with us. The reason for that is multiple fold. Some of it is related to innovation. We continue to deploy new products like lightweight litters, but now we're expanding into other fragrance products as well. So while we continue to work pricing to offset costs, our customers are looking at us as a premier supplier in pet care, and we continue to have growth in North America.

Rosemarie J. Morbelli -- Gabelli & Company -- Analyst

So, I know you that are selling the pet care both under private labels and under your own name, and I should know that. But what is the MTI name it is sold under?

Jonathan J. Hastings -- Group President, Performance Materials

Premium Choice. There's a wide variety, Premium Choices is one. But again, you can find those in many different ways. We can come back to you with a full list of what we do.

Douglas T. Dietrich -- Chief Executive Officer

Yeah. The MTI brand is called Premium Choice. But there is -- because we're private label, you'll see kind of our bentonite and packaging throughout a number of stores, Walmart. You'll also see it through Tractor Supply and Petco, et cetera. So there are a number of outlets where you'll see private label brands. There's a good chance that we're probably the one supplying that bentonite and/or packaging it. But ours is Premium Choice. I hope you -- if you have a cat, I hope you pick up that one.

Rosemarie J. Morbelli -- Gabelli & Company -- Analyst

Thank you, and no, I no longer have a cat.

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Rosemarie, also we should mention that we continue to grow that pet care business in Asia. In Asia, outside of Sivomatic, but Asia, especially in China, but also other countries, we continue to penetrate. Small base right now, but same value proposition continues to play over in Asia as well.

Rosemarie J. Morbelli -- Gabelli & Company -- Analyst

Okay. Thank you.

Douglas T. Dietrich -- Chief Executive Officer

Thanks, Rosemarie.

Operator

At this time, I would like to turn the call back to Ms. Buckwalter for any closing remarks.

Cindi Buckwalter -- Vice President, Investor Relations and Corporate Communications

Thank you, Paula. Thank you all for joining us today. We look forward to speaking with you again very soon and hope you have a good day. Thank you.

Operator

And once again, that does conclude today's conference. We would like to thank everyone for their participation. You may now disconnect.

Duration: 58 minutes

Call participants:

Cindi Buckwalter -- Vice President, Investor Relations and Corporate Communications

Douglas T. Dietrich -- Chief Executive Officer

Matthew E. Garth -- Senior Vice President, Finance and Treasury, and Chief Financial Officer

Daniel J. Moore -- CJS Securities -- Analyst

Silke Kueck -- JPMorgan -- Analyst

Steven K. Schwartz -- First Analysis Securities -- Analyst

D. J. Monagle -- Group President, Specialty Minerals and Refractories

Rosemarie J. Morbelli -- Gabelli & Company -- Analyst

Jonathan J. Hastings -- Group President, Performance Materials

More MTX analysis

Transcript powered by AlphaStreet

This article is a transcript of this conference call produced for The Motley Fool. While we strive for our Foolish Best, there may be errors, omissions, or inaccuracies in this transcript. As with all our articles, The Motley Fool does not assume any responsibility for your use of this content, and we strongly encourage you to do your own research, including listening to the call yourself and reading the company's SEC filings. Please see our Terms and Conditions for additional details, including our Obligatory Capitalized Disclaimers of Liability.

More From The Motley Fool

Motley Fool Transcribers has no position in any of the stocks mentioned. The Motley Fool has no position in any of the stocks mentioned. The Motley Fool has a disclosure policy.