SSYS - Stratasys Ltd.

NasdaqGS - NasdaqGS Real Time Price. Currency in USD
23.85
-0.05 (-0.21%)
At close: 4:00PM EDT

23.85 0.00 (0.00%)
After hours: 4:12PM EDT

Stock chart is not supported by your current browser
Previous Close23.90
Open24.05
Bid23.85 x 1200
Ask23.87 x 800
Day's Range23.76 - 24.24
52 Week Range17.06 - 28.84
Volume371,628
Avg. Volume669,443
Market Cap1.287B
Beta (3Y Monthly)2.68
PE Ratio (TTM)N/A
EPS (TTM)-0.22
Earnings DateApr 30, 2019 - May 6, 2019
Forward Dividend & YieldN/A (N/A)
Ex-Dividend DateN/A
1y Target Est23.33
Trade prices are not sourced from all markets
  • Markit12 hours ago

    See what the IHS Markit Score report has to say about Stratasys Ltd.

    Stratasys Ltd NASDAQ/NGS:SSYSView full report here! Summary * Bearish sentiment is moderate * Economic output in this company's sector is expanding Bearish sentimentShort interest | PositiveShort interest is moderate for SSYS with between 5 and 10% of shares outstanding currently on loan. The last change in the short interest score occurred more than 1 month ago and implies that there has been little change in sentiment among investors who seek to profit from falling equity prices. Money flowETF/Index ownership | NeutralETF activity is neutral. ETFs that hold SSYS had net inflows of $617 million over the last one-month. While these are not among the highest inflows of the last year, the rate of inflow is increasing. Economic sentimentPMI by IHS Markit | PositiveAccording to the latest IHS Markit Purchasing Managers' Index (PMI) data, output in the Technology sector is rising. The rate of growth is weak relative to the trend shown over the past year, but is accelerating. Credit worthinessCredit default swapCDS data is not available for this security.Please send all inquiries related to the report to score@ihsmarkit.com.Charts and report PDFs will only be available for 30 days after publishing.This document has been produced for information purposes only and is not to be relied upon or as construed as investment advice. To the fullest extent permitted by law, IHS Markit disclaims any responsibility or liability, whether in contract, tort (including, without limitation, negligence), equity or otherwise, for any loss or damage arising from any reliance on or the use of this material in any way. Please view the full legal disclaimer and methodology information on pages 2-3 of the full report.

  • 3D Systems vs. Stratasys: Which Had the Better 2018 Earnings Results?
    Motley Fool12 hours ago

    3D Systems vs. Stratasys: Which Had the Better 2018 Earnings Results?

    Here's how things stack up in a metric-to-metric comparison of the two leading 3D printing companies.

  • Business Wire13 hours ago

    Stratasys Files Annual Report on Form 20-F for the Year Ended December 31, 2018

    Stratasys Ltd. announced today that it has filed its annual report on Form 20-F for the fiscal year ended December 31, 2018 with the U.S. Securities and Exchange Commission .

  • Stratasys' (SSYS) Q4 Earnings Match Estimates, Revenues Miss
    Zacks11 days ago

    Stratasys' (SSYS) Q4 Earnings Match Estimates, Revenues Miss

    Stratasys' (SSYS) Q4 results benefit from strong adoption of its products. However, low margins and headwinds like the U.S. government shutdown and weak automotive market in Europe are overhangs.

  • Stratasys Caps Off 2018 With a 7% Decline in 3D Printer Sales
    Motley Fool11 days ago

    Stratasys Caps Off 2018 With a 7% Decline in 3D Printer Sales

    In the fourth quarter, the 3D printing company's revenue slipped 1.2% year over year, but adjusted earnings per share jumped 31%.

  • Stratasys (SSYS) Q4 2018 Earnings Conference Call Transcript
    Motley Fool12 days ago

    Stratasys (SSYS) Q4 2018 Earnings Conference Call Transcript

    SSYS earnings call for the period ending December 31, 2018.

  • Thomson Reuters StreetEvents12 days ago

    Edited Transcript of SSYS earnings conference call or presentation 7-Mar-19 1:30pm GMT

    Q4 2018 Stratasys Ltd Earnings Call

  • Business Wire12 days ago

    Stratasys Releases Fourth Quarter and Full Year 2018 Financial Results – Updated to Include Guidance Clarification

    Fourth Quarter Revenue of $177.1 million and $663.2 million for full year 2018

  • TheStreet.com12 days ago

    Stratasys Tumbles on Mixed Earnings Report

    -- the 3D printing technology company -- fell nearly 14% Thursday afternoon following a mixed earnings report. The company posted adjusted net income for the quarter of $11.3 million that came out to 21 cents per share -- up from 16 cents a share same time the year prior.

  • Why Stratasys Stock Stumbled by 11% Today
    Motley Fool12 days ago

    Why Stratasys Stock Stumbled by 11% Today

    This 3D printer maker couldn't even print flat sales results in 2018.

  • Tempe tech firm launches first spin-off company for 3D-printed products
    American City Business Journals14 days ago

    Tempe tech firm launches first spin-off company for 3D-printed products

    After 10 years of selling the products, PADT is spinning of its popular cleaning device for 3D-printed plastic materials into a separate business.

  • Why Stratasys Stock Jumped 11.5% in February -- and Fell 5.8% on Friday
    Motley Fool15 days ago

    Why Stratasys Stock Jumped 11.5% in February -- and Fell 5.8% on Friday

    The 3D printing company's stock is up 48.9% in 2019 through March 1.

  • 2 3D Printing Stocks Poised to Advance
    InvestorPlace19 days ago

    2 3D Printing Stocks Poised to Advance

    Heading into their fourth-quarter results, two of the largest pure-play 3D printing stocks -- Stratasys (NASDAQ:SSYS) and 3D Systems (NASDAQ:DDD) -- continue to have multiple, strong, positive catalysts. There are signs that these catalysts are taking hold and will positively impact the companies' upcoming Q4 results, further pushing up SSYS stock and DDD stock in the wake of their results.Source: Shutterstock DDD is slated to report its Q4 results today after the market close, while SSYS is scheduled to report its Q4 results on March 7. Major Catalysts for 3D Printing StocksOn its Q3 results conference call, Stratasys noted that it was seeing a "gradual" acceleration of the use of its products by aerospace companies. The company also cited giant defense contractor Lockheed Martin (NYSE:LMT) as one of its customers.InvestorPlace - Stock Market News, Stock Advice & Trading TipsSimilarly, 3D Systems' partnership with military shipbuilder Huntington Ingalls Industries (NYSE:HII), announced last year, seems to be progressing, as HII produced a 3D-printed component for nuclear ships, 3D printing Industry reported on Jan 30. Meanwhile, on its Q3 conference call, DDD said that in the quarter its "Healthcare revenue increased 14% to $53.1 million with growth across all categories," adding that "we continue to be pleased with the overall demand trends for healthcare." * 9 Best Stocks to Buy on U.S.-China Trade Optimism Importantly, the defense/aerospace and healthcare sectors are both extremely large, lucrative markets.Moreover, given the sectors' need for precision, their highly intricate parts, and their need to frequently change parts due to intense use, the companies of both sectors seem like ideal customers for DDD and SSYS. Assuming that the companies' growth in those sectors was stable or accelerated last quarter, I think that their results will beat analysts' expectations, given the seasonal strength of Q4 and analysts' general pessimism towards 3D printing stocks.As a result, both DDD stock and SSYS stock are likely to rise in the wake of their Q4 results. Signs of a Turnaround That Will Benefit 3D Printing StocksThere are multiple signs that both of these 3D printing stocks should benefit from the companies' ongoing turnaround. In Q3, Stratasys' operating income reached $3.4 million, versus a $6.9 million loss during the same period a year earlier, while its EBITDA jumped to $14.7 million from $9.4 million.Furthermore, its Service Revenue increased 10% YoY and its consumable revenue rose 3% YoY, indicating that its customers are starting to use its products more. Over time, that should lead to higher product revenue as products that are used a great deal are replaced by newer products. The company's consumable revenue should then rise as its customers buy more consumables to use in conjunction with their products.As for DDD, its printer revenue surged 17% YoY in Q3, while its software revenue jumped 8% and its materials revenue rose 2%. Thus, DDD appears, like SSYS, to be entering the beginning of a virtuous cycle of its razor-and-blade model.And in another sign that these two 3D printing stocks are beginning a turnaround, research firm Piper Jaffray at the end of January upgraded SSYS stock and DDD stock to "overweight" from "neutral, The Fly reported.Piper analyst Troy Jensen, a veteran watcher of 3D printing stocks, wrote that his checks indicated that "direct sales of production systems were strong in Q4," while "overall 3D printing demand is improving," The Fly stated. Finally, Jensen contended that 3D Systems' "product positioning" has rebounded. The analyst set a $31 price target on SSYS stock and a $17 price target on DDD stock.As of this writing, Larry Ramer owned shares of DDD stock and SSYS stock. More From InvestorPlace * 2 Toxic Pot Stocks You Should Avoid * 7 Consumer Stocks to Buy and Hold for Years * 4 China Stocks Soaring on Trade Hopes * 3 Esports Stocks to Benefit From the Boom Compare Brokers The post 2 3D Printing Stocks Poised to Advance appeared first on InvestorPlace.

  • GlobeNewswire21 days ago

    New Research: Key Drivers of Growth for Molson Coors Brewing, Ralph Lauren, Stratasys, Adtalem Global Education, Unifirst, and Natural Health Trends — Factors of Influence, Major Initiatives and Sustained Production

    NEW YORK, Feb. 26, 2019 -- In new independent research reports released early this morning, Market Source Research released its latest key findings for all current investors,.

  • Stratasys Brings Full-Color Digital Dental Impressions to Life
    Business Wire26 days ago

    Stratasys Brings Full-Color Digital Dental Impressions to Life

    J720 Dental 3D Printer sets new standard in laboratory 3D Printing, combining accuracy, multi-material and full color functionality – at 1.75x throughput

  • 3D Systems Earnings Preview: What to Watch
    Motley Foollast month

    3D Systems Earnings Preview: What to Watch

    On Feb. 28, investors should focus on sales of 3D printers when the company reports fourth-quarter earnings.

  • Should You Be Concerned About Stratasys Ltd.’s (NASDAQ:SSYS) Historical Volatility?
    Simply Wall St.last month

    Should You Be Concerned About Stratasys Ltd.’s (NASDAQ:SSYS) Historical Volatility?

    Want to participate in a short research study? Help shape the future of investing tools and you could win a $250 gift card! If you own shares in Stratasys Ltd.Read More...

  • Business Wirelast month

    Stratasys Conference Call to Discuss Fourth Quarter and Full Year 2018 Financial Results

    The Company plans to hold the conference call to discuss its fourth quarter and full year 2018 financial results on Thursday, March 7, 2019 at 8:30 a.m. (ET). The webcast will be available for 90 days on the "Investors" page of the Stratasys Web site or by accessing the provided web address. Stratasys is a global leader in additive manufacturing or 3D printing technology, and is the manufacturer of FDM® and PolyJet™ 3D Printers.

  • Andretti Autosport Shifts into High Performance Additive Manufacturing with Stratasys
    Business Wirelast month

    Andretti Autosport Shifts into High Performance Additive Manufacturing with Stratasys

    Multi-year collaboration agreement builds on decades of experience, empowering Stratasys customers with FDM technology to win in challenging, competitive racing environments

  • Why These Three 3D Printing Stocks Gained as Much as 42% in January
    Motley Foollast month

    Why These Three 3D Printing Stocks Gained as Much as 42% in January

    3D Systems and Stratasys opened 2019 with a bang. Proto Labs saw a bumpier start to the year.

  • Creating New Possibilities for Additive Manufacturing, Stratasys Removes Complexity From Design-to-3D Print Process
    Business Wirelast month

    Creating New Possibilities for Additive Manufacturing, Stratasys Removes Complexity From Design-to-3D Print Process

    Advanced FDM Software designed to eliminate CAD-to-STL roadblock, streamlining workflow, production times, material usage – aimed at speeding time-to-market and revenue

  • InvestorPlace2 months ago

    Printing Spread Profits in Stratasys and Materialise: SSYS Stock, MTLS Stock

    Bulls and a few likely unwitting bears helped print big gains Wednesday in 3D Systems (NYSE:DDD) and Stratasys Ltd. (NASDAQ:SSYS), courtesy of broker upgrades. But for traders looking to spread their risk among the best stocks in the group, saying goodbye to DDD stock and buying SSYS stock alongside peer Materialise NV (NASDAQ:MTLS) is the better play for printing future profits. Let me explain. A pair of Piper Jaffray upgrades to outperform from neutral for 3D manufacturing equities DDD stock and SSYS stock resulted in hefty gains of 6.33% and 8.03%, respectively, following the analyst Troy Jensen's changes. Behind the ratings move, the he cited improving printing demand, a long-awaited shift to production applications finally beginning to emerge and each company enjoying their best positioning for growth in years. InvestorPlace - Stock Market News, Stock Advice & Trading Tips But similar size gains in DDD and SSYS well-removed from their intraday highs and comparable rationale for the upgrades doesn't mean this is a durable pairing or the two best stocks to own. It makes buying either name more risky in my estimation. ### 3D Printing Long #1: SSYS Stock For spread traders wanting smarter exposure from the 3D printing space. I'd pick just one: Stratasys. Of course, I'd also buy MTLS stock to complete the position, but more on that in a moment. * 10 Stocks to Sell in February With both 3D Systems and Stratasys on the hardware side of the business, but SSYS stock printing a much stronger price chart and having shed its bearish short interest down to 12% compared to DDD's 23%; the market is already hinting Stratasys is the better-positioned of the two. ### SSYS Stock Weekly Chart Ideally, I'd wait for a trigger above $25.18 in SSYS stock to get long. The buy point represents a breakout above Tuesday's high and a price move back above mid-pivot resistance of $24.70 within the bullish double-bottom base construction. But as part of a spread trade with MTLS stock, an allowance to go long with a 10% stop-loss makes sense. ### 3D Printing Long #2: Materialise NV (MTLS) Belgium-based MTLS stock hasn't enjoyed the notoriety or volatile fortunes and misfortunes of SSYS stock or 3D Systems. But Materialise has earned a reputation for capturing solid growth and profits during a couple rocky years for the industry. * 7 High-Dividend Stocks Yielding More Than 5% (Plus a Bonus) Unlike DDD, MTLS stock also distinguishes itself from its hardware peer Stratasys as it's positioned on the software side of the 3D printing space. This diversification adds to the attractiveness of owning shares and further spreading the industry risk alongside SSYS stock. ### MTLS Stock Weekly Chart Another bonus of buying MTLS stock today as part of a spread position with SSYS stock is that shares have corrected within their uptrend into a nice area of technical support. Shares are currently testing a former cup-shaped base and pair of key Fibonacci levels for support. Again, and similar to Stratasys, it might be tempting to wait on an ideal entry in MTLS stock. But as part of a spread trade where SSYS stock is showing sure signs of good things to come and MTLS is already in a sturdy uptrend and offering investors an opportunity to buy at a smart-looking discount; this pair looks ready for printing future profits today. Disclosure: Investment accounts under Christopher Tyler's management do not currently own positions in any securities mentioned in this article. The information offered is based upon Christopher Tyler's observations and strictly intended for educational purposes only; the use of which is the responsibility of the individual. For additional options-based strategies, related musings or to ask a question, you can find and follow Chris on Twitter @Options_CAT and StockTwits. ### More From InvestorPlace * 2 Toxic Pot Stocks You Should Avoid * 10 Smart Money Stocks to Buy for the Rest of the Year * 10 Best Consumer Stocks to Buy in 2019 * 10 Triple-A Stocks to Buy in February Compare Brokers The post Printing Spread Profits in Stratasys and Materialise: SSYS Stock, MTLS Stock appeared first on InvestorPlace.

  • 3D Printed Realism from Stratasys Helps Bring Ancient Artifacts to Life
    Business Wire2 months ago

    3D Printed Realism from Stratasys Helps Bring Ancient Artifacts to Life

    Google Arts and Culture re-creates forgotten history with Stratasys J750 3D Printer - advancing new possibilities for learning, education, and art appreciation

  • Why 3D Printing Stocks Jumped Today
    Motley Fool2 months ago

    Why 3D Printing Stocks Jumped Today

    The pop may not be as bullish as it seems.