Kaman Corporation (NYSE:KAMN) Q3 2023 Earnings Call Transcript
Kaman Corporation (NYSE:KAMN) Q3 2023 Earnings Call Transcript November 5, 2023
Operator: Good day and thank you for standing by. Welcome to the Kaman Corporation Q3 2023 Conference Call. At this time all participants are in a listen-only mode. [Operator Instructions] Please be advised that today's conference is being recorded. I would now like to hand the conference over to Matthew Petterson, Chief Accounting Officer and Controller. Please go ahead.
Matthew Petterson: Good morning. Welcome to Kaman's Third Quarter 2023 Earnings Call. Leading the call today are Ian Walsh, Chairman, President and Chief Executive Officer; and Carroll Lane, Senior Vice President and Interim Chief Financial Officer. Before we begin, please note that some of the information discussed during today's call will consist of forward-looking statements, setting forth our current expectations with respect to the future of our business, the economy and other events. These include projections of revenue, earnings and other financial items, statements on plans and objectives of the company or its management, statements of future economic performance and assumptions underlying these statements regarding the company and its business.
The company's actual results could differ materially from those indicated in any forward-looking statements due to many factors, the most important of which are described in the company's latest filings with the Securities and Exchange Commission, including the company's third quarter 2023 results included on Form 10-Q and the current report on Form 8-K filed yesterday evening together with our earnings release. We also expect to discuss certain financial measures and information that are non-GAAP measures as defined in applicable SEC rules and regulations. Reconciliations to the company's GAAP measures are included in the earnings release filed with yesterday's Form 8-K. Finally, we posted an earnings call supplement, which provides additional context on our financial performance.
You can find this presentation in the Investor Presentation section of our website. Now I'll turn the call over to Ian Walsh.
Ian Walsh: Good morning, everyone, and thank you for joining our earnings call today. Our strong performance continued into the third quarter as we remain focused on optimizing our cost structure and consistent execution against our objectives, which are to drive overall improved profitability, free cash flow and return on invested capital. Our results were led by continued strength in our Engineered Products segment. Based on this performance, we are revising our outlook for the full year and now expect higher adjusted EBITDA in the range of $102.5 million to $110 million and expected sales in the range of $765 million to $775 million. Net sales for the quarter grew 6.4% over the prior year period to $183 million, reflecting the contribution from Aircraft Wheel and Brake and approximately 21% organic growth from our Engineered Products segment.
These factors were offset primarily by lower JPF sales during the period, which was anticipated as this program continues to wind down. Continuing the trend from the second quarter, our end markets continued to perform well in the third quarter. Commercial, business and general aviation in the third quarter saw a better than 30% growth year-over-year. Our specialty bearings business continued to overperform as commercial markets continue to demonstrate robust demand. Industrial end markets improved notably in the third quarter with double-digit organic growth compared to relatively flat sales volume for the first half of the year, driven by growth in miniature bearings volumes for industrial solutions. Our medical and defense end markets continued to grow in the low to mid-single digits.
We remain focused on our transformational strategy, which includes investing in the high-growth, high-margin areas of our business, optimizing our cost structure and eliminating the historic sources of variation within our business. I'm pleased to report that these efforts continue to yield results in the third quarter with adjusted EBITDA dollars and margin improving meaningfully over the prior period. In the third quarter of 2023, we achieved adjusted EBITDA of $25.2 million or 13.8% of sales, compared to $19.5 million or 11.3% of sales in the prior year. As we move into the fourth quarter, we are pleased with the progress we have made so far this year and still have remaining objectives to accomplish as we reposition our company. Beginning with Engineered Products segment, we continued to invest in opportunities for organic growth to drive favorable mix and margin performance to our consolidated results.
Our investment strategy also focuses on fostering innovation and developing strategic partnerships for the next generation of products. In our Precision Products segment, we have made significant progress to right-size our operations following the wind down of the JPF and K-MAX production programs and expect to complete the consolidation of our JPF production facilities in the first half of 2024. We remain on track to realize $22 million to $25 million of cost savings in 2024 from a cost reduction program that we previously disclosed. Turning to our segment performance and beginning with Engineered Products. In the third quarter, we continued to demonstrate strong performance with overall sales growth of 34.3%, of which approximately 21% was organic.
Higher sales volumes were broad-based across our business units, led by strength in traditional self-lubricating bearings and PMA aftermarket programs. Gulfstream continues to be a wonderful customer for us, with our high load capacity, self-lubricating flat track rollers. We continue to make progress on our TDH, or Titanium Diffusion Hardening innovation, in both the medical and space propulsion applications. We have over 30 applications being tested, and we're showing promising results of TDH as a replacement in orthopedic surgery, where many patients are allergic to cobalt-chrome plated parts. Higher segment level sales generated stronger profit with Engineering Products adjusted EBITDA increasing 76.5% to $38.4 million. This stronger volume also demonstrated the operating leverage in our business as margins expanded by 740 basis points year-over-year to 31.1%.
In our Precision Products segment, sales declined 41.5% to $27.1 million which was attributed to the anticipated decline in JPF volume compared to the prior year. Excluding the effects of JPF, segment level sales increased $9.7 million, driven by higher K-MAX aftermarket sales and higher FireBurst deliveries, offset partially by lower sales in legacy fuzing programs during the period. We recently completed delivery of our first tranche of FireBurst units to our overseas customer. Segment level adjusted EBITDA was negative $2.5 million compared to $6.1 million in the prior year. Lower segment adjusted EBITDA was a result of lost operating leverage as we wind down the JPF program and work to right-size our facility footprint for our remaining legacy programs.
As we have noted, this is a focused area for us and a meaningful portion of our $22 million to $25 million of cost savings identified is generated from the consolidation of our footprint. Turning to our Structures segment. Third quarter sales were $32.3 million compared to $33.7 million in the prior year. The modest decline from the prior year was primarily a result of lower A-10 and UH-60 Black Hawk deliveries, partially offset by higher Rolls-Royce and Sikorsky volume. Our Vermont facility continues to be our benchmark as they grow and win new more profitable programs, such as a new contract with L3Harris for their new ground-based midcourse defense radomes and a Rolls-Royce Trent 7000 fan track liners for the Airbus A330neos. Third quarter segment level adjusted EBITDA was negative $2.2 million compared to breakeven results in the prior year period.
As we have noted throughout the year and reflected in our guidance, we are working to optimize production of legacy programs that have driven our historical variability in this segment. We continue to anticipate full year segment level profitability at around breakeven for the year. As we enter the final quarter of 2023, we are pleased with the measurable progress we have made across our company. Our positive momentum can be attributed to the ongoing execution of our strategic initiatives, streamlining our operations and investing in our high-performing businesses to enhance the overall quality of our earnings. Looking forward, we maintain our commitment to several key objectives. First, we are disciplined in deploying our capital resources to the most promising growth opportunities within our Engineered Products segment.
Our emphasis continues to be on fostering innovation to drive substantial year-over-year organic growth, achieve margin improvement and generate strong cash flows. In the Precision Products segment, we are committed to transitioning our business by making prudent and targeted investments in next-generation products. Our decisions to consolidate our JPF facilities and conclude K-MAX production are aimed at enhancing operational performance and reducing variability. These actions will reposition Precision Products business units for profitable growth in future years. We also expect to benefit from the continuing investments being made in our KARGO UAV system, a purpose-built autonomous medium lift logistics vehicle, which has targeted military and commercial customer requirements in a large addressable end market.
We are excited to recently receive a contract with our partners at Near Earth Autonomy by the U.S. Army Futures Command to demo in 2024 a KARGO UAV capable of moving loads of 800 pounds and flying distances over 100 miles. Our KARGO UAV is being designed to carry 800 pounds and has a max range of 500 miles. Within our Structures segment, we continue to diligently implement best practices with the aim of ensuring that all 3 of our structures businesses operate consistently in a healthy manner. Now I'll turn the call over to Carroll for a closer look at the numbers. Carroll?
Carroll Lane: All right. Thank you, Ian. Good morning, everyone. I'll walk you through our third quarter results before turning to our outlook for 2023. Third quarter sales were $183 million, up 6.4% from the prior year. Aircraft Wheel & Brake, which we acquired in mid-September 2022, contributed sales of $16.9 million. Organic sales were relatively flat with strong organic revenue growth across our Engineered Products segment of approximately 21%, offset by lower sales in our Precision Products segment related to the previously discussed wind-down of the U.S. government JPF program, which was anticipated, and a slight reduction in sales in our Structures segment. Operating income in the third quarter was $11.9 million, including $1.9 million from Aircraft Wheel and Brake.
That's an increase of $12.6 million compared to a slight operating loss in the prior year. Adjusted EBITDA in the third quarter was $25.2 million, an increase of almost 30% compared to the prior year of $19.5 million. EBITDA margin increased 250 basis points to 13.8%. Higher profitability stemmed mostly from the benefits of organic growth, greater operating leverage from higher sales and cost-saving measures taken over the past 12 months that are intended to enhance our operating performance. We continue to execute on our previously announced cost savings initiatives, and we expect total savings of $22 million to $25 million in 2024, with over $12 million to be realized in 2023. Turning back to our results. Gross margin was 35.3%, which increased 350 basis points compared to the prior year.
This was attributable to the addition of Aircraft Wheel & Brake, higher organic volume in our Engineered Products segment and benefits from our cost savings initiatives. Selling, general and administrative expenses were $42.5 million, a decrease of 13.3% due to the absence of corporate development costs incurred in the prior year, which were associated with the acquisition of Aircraft Wheel & Brake. As a percentage of sales, lower SG&A was due to operating leverage on higher volume, cost control measures and lower corporate development costs. Interest expense in the quarter was $9.4 million compared to $3.6 million in the prior year as a result of higher interest rates and the additional debt from the Aircraft Wheel & Brake acquisition. As we noted last quarter, we refinanced our debt in the second quarter of this year and extended our maturity to 2028, providing us ample flexibility through our deleveraging plans.
Third quarter free cash flow was $3.8 million and year-to-date free cash flow is $9.8 million. We currently expect to settle our convertible notes with available borrowing capacity under our credit agreement. However, we continue to assess other potential options for the refinancing of these instruments prior to their scheduled maturity in May 2024. With the extension of our credit agreement, we maintain sufficient capacity to use proceeds from this facility to repay the convertible notes and satisfy our working capital requirements. During the third quarter, we reported GAAP net income of $1.5 million or $0.05 per diluted share that compares to a loss of $280,000 or a $0.01 loss per diluted share in the prior year period. Adjusted net income during the period was $2.7 million or $0.10 per diluted share, and that compares to $8.1 million or $0.29 per diluted share in the prior year period.
Lower earnings per diluted share in 2023 was attributable to higher interest expense, partially offset by stronger operating results. For a full reconciliation of our GAAP to non-GAAP earnings, please review our earnings press release. Now turning to our outlook. We are revising our full year 2023 outlook to account for the strength we are seeing in our Engineered Products segment. As Ian highlighted, our end markets are demonstrating strong performance, we're successfully increasing our market share in Engineered Products and our overall backlog remains robust. Our primary focus continues to be expanding our highest growth businesses, enabling us to generate more substantial returns. At the same time, we're optimizing our cost structure to align with the size and requirements of our business.
Our results in the first 9 months of this year are ahead of expectations, with a portion of our performance attributable to $7.2 million of EBITDA from our JPF program as we delivered against commitments in the first half of 2023. While we do not expect significant JPF volumes in the fourth quarter, we now expect total revenue in the range of $765 million to $775 million, driven by the strength we're seeing in Engineered Products. We've increased our expectations for net earnings to $6.5 million to $12.2 million, and diluted EPS of $0.23 per share to $0.43 per share, or $0.40 per share to $0.60 per share on an adjusted basis. This increase is primarily driven by our expectation of drop-through from the Engineered Products segment, coupled with our cost optimization efforts, offset partially by interest expense.
Our expectations of Engineered Products drop-through and cost reduction is also driving our improved adjusted EBITDA outlook, which is now in the range of $102.5 million to $110 million. This updated outlook considers both strength in Engineered Products and some incremental risk related to the Precision Products and Structures segments. Our expectations for operating cash flow of $60 million to $70 million and free cash flow of $35 million to $45 million remains consistent with our prior outlook, as we continue to make investments that will support future growth in our Engineered Products segment and improvements in our Structures segment. As a reminder, to improve the reliability of our outlook and improve transparency, our previous outlook excluded discrete items, which have historically been sources of variation.
Specifically, these included unawarded or uncertain JPF DCS orders and sales of the 2 remaining K-MAX aircraft held in inventory. Our current outlook now considers the sale of an additional K-MAX aircraft in Q4, as well as the delivery of a limited volume of JPF orders currently in backlog. With that, I'll turn the call back over to Ian for closing remarks.
Ian Walsh: Thanks, Carroll. With one quarter left to go in 2023, we continue to see that our transformational strategy is producing strong results, better level loading our quarters by reducing our historical sources of variation and aligning with our expectations. Our team remains focused to deliver on our long-term strategy to maximize shareholder value. The third quarter highlights the exceptional performance of our Engineered Products segment, emphasizing its substantial earnings power and growth potential. This segment remains a key focus for our ongoing investment. We are confident that as we make future improvements in our Precision Products and Structures segments, we will be well positioned to achieve significant earnings growth, while steadily reducing our debt burden.
Just as important, I'm thrilled with our progress on the cultural transformation of our company as we strive toward becoming a high-performance team with consistent execution and innovation. We believe that our future success depends on the core capabilities and dedication of our workforce to reflect the values of our founder, Charles Kaman, and their deep desire to solve our customers' most difficult problems. We are truly appreciative of the many contributions and collaborative teamwork shown by our colleagues through the first three quarters of 2023. It's been instrumental in our transformational journey. With that, I'd like to open the line for questions. May we have our first question, please.
See also 20 Best Chocolate Brands in the World and 15 Biggest Corporate Frauds in US History.
To continue reading the Q&A session, please click here.
