MKS Instruments, Inc. (NASDAQ:MKSI) Q3 2023 Earnings Call Transcript
MKS Instruments, Inc. (NASDAQ:MKSI) Q3 2023 Earnings Call Transcript November 2, 2023
Operator: Good day and thank you for standing by. Welcome to the MKS Instruments' Third Quarter 2023 Earnings Conference Call. At this time, all participants are in a listen-only mode. After the speaker's presentation, there will be a question-and-answer session. Please be advised that today's conference is being recorded. I would now like to hand the conference over to your first speaker today. David Ryzhik.
David Ryzhik: Good morning, everyone. I am David Ryzhik, Vice President of Investor Relations. And I'm joined this morning by John Lee, President and Chief Executive Officer; and Seth Bagshaw, Executive Vice President and Chief Financial Officer. Yesterday after market close, we released our financial results for the third quarter of 2023, which are posted to our investor website at investor.mks.com. As a reminder, various remarks about future expectations plans and prospects for MKS comprise forward-looking statements. Actual results may differ materially as a result of various important factors, including those discussed in yesterday's press release and in our Annual Report on Form 10-K for the year-ended December 31, 2022.
These statements represent the company's expectations only as of today and should not be relied upon as representing the company's estimates or views as of any date subsequent to today. And the company disclaims any obligation to update these statements. During the call, we will be discussing various financial measures. Unless otherwise noted, all references to combined company financial measures reflect the combined results of MKS and Atotech Ltd, which MKS acquired on August 17, 2022. Also, unless otherwise noted, all income statement related financial measures will be non-GAAP other than revenue. Please refer to our press release and the presentation materials posted to our investor website for information regarding our combined company results, non-GAAP financial results and a reconciliation of our GAAP and non-GAAP financial measures.
For a detailed breakout of reported and combined company revenues by end market and division, please visit our investor website. Now, I'll turn the call over to John.
John Lee: Thanks, David. Good morning everyone, and thank you for joining us today. Before I discuss our third quarter results and key business trends, I'd like to touch on the devastating violence that has occurred in the Middle East over the past month. There's simply no words that can describe the events that have unfolded, and our primary concern is the health and safety of our employees and their families in the region. As some of you may know, MKS has three facilities in Israel that manufacture some of our controls, optics and photonics solutions, which all remain operational. The dedication and resilience of our Israeli team is unmatched, and we hope for a return to peace quickly. Turning to our third quarter results, MKS delivered strong profitability despite continued softness in end market demand.
We reported revenue of $932 million, adjusted EBITDA of $235 million, and net earnings per diluted share of $1.46. Revenue from our semiconductor market was in line with our expectations as the cyclical downturn in industry memory spending continued. As expected, demand for our critical vacuum subsystems for deposition and etch remained muted. However, demand for our photonic solutions for lithography, metrology and inspection continues to be resilient. Looking to the fourth quarter, we expect revenue from our semiconductor market to decline sequentially due to the continued weakness in industry memory spending, particularly for NaN, which is at a historically low level, and where leading edge tools contain relatively more MKS content. We also expect continued inventory workdowns at key customers as they adjust for current demand.
The semi market will have its cycles, but the secular growth drivers over the long term are quite clear. The connected world will need more semiconductors with enhanced capabilities, creating the need for miniaturization and increased complexity. MKS is actively engaged with customers across a broad range of technology inflections. Examples include next-generation power solutions for advanced etch applications, optical subsystems for lithography, metrology and inspection, and precision motion for advanced bonding processes that enable applications such as high bandwidth memory. We pride ourselves on investing during a downturn to position us to be even stronger in the next upturn. That is the exact playbook we have deployed over the past 60 plus years, enabling us to become a foundational supplier to the semiconductor industry with number one or number two segment share across more categories of critical subsystems than anyone else in the industry.
Turning to our Electronics & Packaging market, revenue grew sequentially and slightly better than expected due to normal seasonality associated with the consumer electronics market, as well as slightly higher PCB and Packaged Substrate production ahead of the Golden Week holidays in Asia in the beginning of the fourth quarter. I'm pleased to announce that we also shipped a number of HDI laser systems to the low-earth orbit, or LEO satellite communications space. We are the process tool record from multiple customers serving the LEO space due to the unique capabilities of our proprietary HDI via drilling technology, which enables increased productivity for one of the industry's fast emerging applications. This is a validation of our technology leadership and our unique ability to solve the hardest problems, establishing us as a key supplier to the leading PCB manufacturers.
In addition, we also deliver our proprietary chemistry and playing [ph] equipment to this market, which highlights opportunities for an integrated approach. Looking to the fourth quarter, we expect revenue from our Electronics & Packaging market to be down sequentially, primarily due to seasonally softer chemistry utilization as well as the lumpy nature of our equipment sales. We are seeing some signs of stabilization in the PC and smartphone markets. Within the server market, there is continued strength in the Package Substrate market for AI applications, but this is more than offset by broader softness in non-AI server applications. Turning to our Specialty Industrial market, revenue was slightly below our expectations. Overall, the business was stable across our markets, but we saw some modest weakness in solar and LED applications.
We leveraged our expertise in R&D investments in our Semiconductor and Electronics & Packaging markets to drive opportunities in our Specialty Industrial market. One example is the investment we have made in laser technology for advanced micromachining applications, where we see portability into Specialty Industrial applications such as solar and life and health sciences. Looking to the fourth quarter, we expect revenue from our Specialty Industrial market to be slightly down compared to third quarter levels, while demand across our end markets remains cyclically muted. We are highly engaged with customers and believe we are well positioned for the upturn. I'm proud of how our team continues to execute and deliver timely solutions for our customers while pursuing operational efficiency through tight management of discretionary costs.
We have a long history of prudent, cost control and financial stewardship of our business throughout various market conditions, and today is no exception. Many of you on the call are familiar with the multi-decade secular growth story of the semiconductor market. We have been and will continue to be foundational to that market. However, electronic devices of today and the future will need more than just semiconductor transistor scaling. As we move into an era of multi-chip packaging or systems scaling. MKS is uniquely positioned to enable this new era of scaling with the broadest portfolio of critical technologies across equipment, chemistry and services. And now I'd like to turn the call over to Seth.
Seth Bagshaw: Thank you, John. Before I cover our third quarter results provide details our outlook for the fourth quarter. I want to echo John's comments regarding our concern for the health and welfare of our employees in Israel. We are amazed at the dedication and fortitude of our Israeli team as they operate in extremely difficult circumstances. This is a point of reference. Revenue from our manufacturing operations in Israel the last 12 months represented approximately 7% of our total revenue. Turning to our third quarter results. We delivered a revenue of $932 million just above the midpoint of our guidance. As expected, we recovered substantially all the remaining revenue impacted by the ransomware incident in the first quarter, which estimated approximately $30 million.
After excluding the impact of ransomware incident recovery from the second and third quarters, our revenue grew slightly on a sequential basis. Turning to our semiconductor market. Revenue was $367 million in third quarter. After seeing the impact of ransomware incident recovery from the second and third quarters, our semiconductor revenue was relatively flat on a sequential basis. Revenue for Electronics & Packaging market was $243 million, an increase of 8% sequentially. Excluding the impact of foreign exchange palladium pass-through third quarter revenue declined 9% on a year-over-year basis with Q3 2022 representing combined company results. Moving to our Specialty Industrial market. Revenue in the third quarter was $322 million declining 5% sequentially.
However, after excluding the impact of ransomware incident in the second and third quarters, our Specialty Industrial revenue was relatively stable on a sequential basis. Within our Specialty Industrial market, sales of our general metal finishing solutions to the automotive industry were flat on a sequential basis. On a year-over-year basis Specialty Industrial revenue was relatively flat excluding the impact of the ransomware incident, foreign exchange and palladium pass-through with Q3 2022 representing combined company results. In the third quarter, overall consumables and services revenue was also consistent on a year-over-year combined company basis, excluding the impact of foreign exchange and palladium pass-through and comprised 42% of our total revenue.
We expect consumables and services revenue to remain a resilient source of revenue and profitability going forward. Turning to our margins. Third quarter gross margin was 47.1%, a sequential increase of 20 basis points exceeding the high end [ph] of our guidance. Efficient factory utilization, disciplined cost management and favorable product mix contribute to this outperformance. Third quarter operating expenses were $236 million sequential decrease of $7 million and below low-end of our guidance reflecting continued disciplined cost management. Third quarter operating margin was 21.8% and adjusted EBITDA margin was 25.2%, both exceeding our expectations reflecting the strength in our operating model. Our integration of Atotech continues to progress very well.
Remain on track to achieve our cost synergy target of $55 million within 18 months to 36 months post close. We exited the third quarter achieving annualized synergies of nearly $45 million. Net interest expense for the third quarter was $84 million, relative in line with our expectations. Our tax rate for the third quarter was 14%, favorable to our expectations and reflective of the success of certain tax planning initiatives following the closing of the Atotech acquisition. As a result of these efforts, we now expect full year 2023 tax rate to be 19%. Looking beyond the fourth quarter, we believe the low 20% tax rate is the right way to think about it at this time, we expect to provide a more formal update to our long term tax rate in our fourth quarter earnings call.
Net earnings for the third quarter with $98 million or $1.46 per diluted share. Turning to the balance sheet and cash flow. We exited the third quarter with more than $1.3 billion of liquidity, including cash to short term investments of $860 million in an undrawn revolving credit facility of $500 million. The cash position represents the increase with $758 million at the end of the second quarter. Free cash flow in the quarter were $142 million primarily results of strong cost control and sequential improvement in working capital. We exited the third quarter with gross debt of $5 billion. In October, we had a voluntary debt prepayment of $100 million, which is consistent with our strategy of deleveraging our balance sheet. Also in the current quarter, we successfully completed a repricing by $3.6 billion secured tranche B term loan.
The repricing reduced the spread on our term loan from SOFR plus 275 basis points to SOFR plus 250 basis points, and also eliminated the credit spread adjustment respect to our term loan, which was 10 basis points at the time of the repricing. This repricing, completed despite challenging market conditions, is consistent with our long term practice of proactively managing our leverage and demonstrates the confidence lenders have in our operating model. At current rates, we estimate the combination of the repricing and prepayment will reduce our annualized interest expense by approximately $19 million. Our net leverage ratio exiting the third quarter was 4.6 times based on a trailing 12 month adjusted EBITDA. Our net leverage, as defined in our credit agreement, includes several other adjustments and was 4.2 times exiting the third quarter.
Consistent with the prior quarter, we made a dividend payment of $15 million, $0.22 per share. I'll now turn to our fourth quarter outlook. We expect fourth quarter revenue $840 million plus or minus $40 million by end market outlook is as follows. Revenue from a semiconductor market of $320 million plus or minus $15 million. Revenue from Electronics & Packaging market of $205 million plus or minus $10 million. And revenue from a Specially Industrial market of $315 million plus or minus $15 million. Based on the midpoint of our guidance, we now expect revenue in the second half of 2023 to be slightly lower than the first half, compared to our prior expectation that it would be slightly higher than the first half. This is primarily due to our expectation of short term customer inventory workdowns in our semiconductor market.
Based on anticipated product mix and revenue levels, we estimate fourth quarter gross margin of 45.5% plus or minus one percentage point. We expect operating expenses of $235 million plus or minus $5 million, relatively consistent with third quarter levels. For the fourth quarter, we estimate adjusted EBITDA of $185 million plus or minus $20 million. For the fourth quarter net interest expense, expect to be $80 million, reflecting current interest rates, as well as our recent successful tranche B term loan repricing and voluntary debt prepayment. Our tax rate expect to be 16% for the fourth quarter, consistent with the updated full year 2023 tax rate outlook of 19% that I mentioned earlier. Given these assumptions, we expect fourth quarter net earnings at $0.85 per diluted share plus or minus $0.27.
In closing, we executed very well in maintaining profitability and generating solid cash flow despite cyclical softness in our end markets. These are things we can't control. We remain confident in long-term secular growth opportunities across our portfolio. When the market does bounce back, we are well positioned to emerge from the current environment even stronger than we were going in. With that, I'll turn it back to the operator for Q&A.
See also 14 Best Low Risk High Growth Stocks to Buy Now and 16 Most Undervalued Penny Stocks To Invest In.
To continue reading the Q&A session, please click here.
