Q3 2023 Kadant Inc Earnings Call
Participants
Jeffrey L. Powell; President, CEO & Director; Kadant Inc.
Michael J. McKenney; Executive VP & CFO; Kadant Inc.
Aditya Madan; Research Associate; D.A. Davidson & Co., Research Division
Gary Frank Prestopino; MD; Barrington Research Associates, Inc., Research Division
John Edward Franzreb; Senior Equity Analyst; Sidoti & Company, LLC
Lawrence Tighe De Maria; Group Head of Global Industrial Infrastructure; William Blair & Company L.L.C., Research Division
Presentation
Operator
Good day, and thank you for standing by. Welcome to the Kadant's Third Quarter 2023 Earnings Conference Call. (Operator Instructions) Please be advised that today's conference is being recorded.
I would now like to hand the conference over to your speaker today, Michael McKenney, Executive Vice President and Chief Financial Officer. Please go ahead.
Michael J. McKenney
Thank you, Amy. Good morning, everyone, and welcome to Kadant's Third Quarter 2023 Earnings Call. With me on the call today is Jeff Powell, our President and Chief Executive Officer.
Before we begin, let me read our safe harbor statement. Various remarks that we may make today about Kadant's future plans and expectations, financial and operating results and prospects are forward-looking statements for the purposes of the safe harbor provisions under the Private Securities Litigation Reform Act of 1995. These forward-looking statements are subject to known and unknown risks and uncertainties that may cause our actual results to differ materially from these forward-looking statements as a result of various important factors, including those outlined at the beginning of our slide presentation and those discussed under the heading Risk Factors in our annual report on Form 10-K for the fiscal year ended December 31, 2022, and subsequent filings with the Securities and Exchange Commission.
In addition, any forward-looking statements we make during this webcast represent our views and estimates only as of today. While we may elect to update forward-looking statements at some point in the future, we specifically disclaim any obligation to do so even if our views or estimates change.
During this webcast, we will refer to some non-GAAP financial measures. These non-GAAP measures are not prepared in accordance with generally accepted accounting principles. A reconciliation of the non-GAAP financial measures to the most directly comparable GAAP measures is contained in our third quarter earnings press release and the slides presented on the webcast and discussed in the conference call, which are available in the Investors section of our website at www.kadant.com.
Finally, I wanted to note that when we refer to GAAP earnings per share or EPS and adjusted EPS on this call, we are referring to each of these measures as calculated on a diluted basis.
With that, I'll turn the call over to Jeff Powell, who will give you an update on Kadant's business and future prospects. Following Jeff's remarks, I'll give an overview of our financial results for the quarter, and we will then have a Q&A session. Jeff?
Jeffrey L. Powell
Thanks, Mike. Hello, everyone. Thank you for joining us this morning to review our third quarter results and discuss our outlook for the remainder of the year.
I'll begin by reviewing our operational highlights. The third quarter was another record-setting performance, benefiting from a combination of excellent execution across our operating segments and stronger-than-expected aftermarket parts revenue. This led to near record revenue and record adjusted EBITDA, record adjusted EBITDA margin and record adjusted EPS in the third quarter.
As has been the case throughout 2023, our operations teams around the globe delivered exceptional value for our customers in the most recent quarter, leading to excellent performance across our key financial metrics. I want to thank them for their outstanding work and the results they generated not only in the third quarter but throughout the year.
Turning next to Slide 6. I'd like to review our Q3 financial performance. As you can see on the slide, our Q3 performance was notably higher across most key metrics compared to Q3 of last year. Revenue was up 9% compared to the third quarter of 2022 to $244 million and benefited from record capital shipments and strong aftermarket parts business.
Solid execution contributed to our record adjusted EBITDA of $53 million and a record EBITDA margin of 21.6%. All our operating segments delivered excellent adjusted EBITDA margin performance. Cash flows from operations and free cash flow were outstanding in the third quarter at $47 million and $38 million, respectively, demonstrating the strength of our business model. As anticipated, bookings [softened] from the record-setting pace earlier this year and were essentially flat compared to the prior period.
I'll review the performance of our operating segments next, beginning with our Flow Control segment. Capital project activity and solid aftermarket demand contributed to revenue growth in our Flow Control segment, up 5% compared to Q3 of last year. Bookings were $83 million, down 2% due to weaker capital bookings compared to the prior period. Aftermarket parts bookings were up slightly in the third quarter and represented 71% of total revenue in this segment.
Excellent execution in both the commercial and operational areas of the business led to solid adjusted EBITDA and an adjusted EBITDA margin of 29.7%. Many end markets in our Flow Control segment remained strong despite the general sluggishness found in the manufacturing sector. We continue to see good levels of project activity and are well positioned to win new business as these projects move forward, although the timing is somewhat uncertain.
In our Industrial Processing segment, revenues were up 9% to $94 million, led by record aftermarket parts business, which made up 60% of our total revenue in Q3. Adjusted EBITDA was up 9%, and our adjusted EBITDA margin was excellent at 23.8%. As anticipated, demand slowed in Q3 in response to producers taking market-related downtime. As was the case in our Flow Control segment, capital project activity and interest remain high across all product lines despite the economic headwinds.
In our Material Handling segment, we experienced strong demand for both capital equipment and aftermarket parts. Revenue was up 15% to $59 million due to record capital revenue in the third quarter. All product lines in this segment contributed to this performance. Bookings in this segment were up 17% compared to the same period last year to $56 million.
This growth was largely due to increased demand for our high-performance balers used to prepare recycled materials and post-consumer waste for secondary processing. Solid execution helped boost adjusted EBITDA by 33% and adjusted EBITDA margin by 300 basis points compared to the same period last year. While we expect demand to moderate in the near term, we continue to see growing business activity for our bulk Material Handling equipment and our balers, particularly in North America.
As we look ahead to the remainder of 2023, we expect to finish the year with record results. We ended the third quarter with a large backlog and expect fourth quarter demand to be consistent with the prior quarter. Although we are seeing a lot of activity around capital projects, the timing of these projects is uncertain due to macroeconomic headwinds.
And finally, our healthy balance [strong] cash flow have us well positioned to pursue new opportunities.
With that, I'll pass the call over to Mike for his review of our Q3 financial performance.
Michael J. McKenney
Thank you, Jeff. I'll start with some key financial metrics from our third quarter. Consolidated gross margins were 43.3% in the third quarter of '23, up 80 basis points compared to 42.5% in the third quarter of '22. All our segments contributed to the higher gross margins, especially our Material Handling segment, which was up 340 basis points compared to the third quarter of '22.
Parts and consumables revenue represented 61% of revenue in the third quarter of '23 compared to 63% in the prior year. SG&A expenses were $57.9 million in the third quarter of '23, an increase of $4.7 million compared to $53.2 million in the third quarter '22 and included a $1.1 million increase from the unfavorable effect of foreign currency translation.
The remaining increase in SG&A expense is primarily associated with increased compensation expense and outside consulting fees. As a percentage of revenue, SG&A expenses were 23.7% in the third quarters of '23 and '22.
Our effective tax rate of 25.8% in the third quarter of '23 was lower than we anticipated due to discrete tax items. Our GAAP EPS increased 12% to $2.63 in the third quarter compared to $2.35 in the third quarter of '22 and our adjusted EPS increased 13% to a record $2.69.
Our third quarter '23 adjusted EPS exceeded the high end of our guidance range by $0.40 due primarily to higher revenue in our stock preparation and Material Handling product lines. In addition, lower selling-related costs and a lower tax rate also contributed to the guidance [beat].
Adjusted EBITDA increased 10% to a record $52.7 million compared to $47.8 million in the third quarter of '22 due to strong performance in all our segments, most notably in our Material Handling segment, which had near record revenue and adjusted EBITDA in the quarter.
Adjusted EBITDA as a percentage of revenue was a record 21.6% in the third quarter of '23 compared to 21.3% in the third quarter of '22. We had our highest quarterly operating cash flow since the fourth quarter of '21 at $47 million in the third quarter of '23, up 89% compared to $24.9 million in the third quarter of '22.
We had cash outflows in the first half of the year related to working capital to support our record backlog. In the third quarter, projects were completed and shipped, resulting in a sequential decrease in inventory of $12 million.
Overall, working capital was a $5.8 million source of cash in the third quarter of '23. Free cash flow increased 106% to $38.1 million in the third quarter of '23 compared to $18.5 million in the third quarter of '22.
We had several notable nonoperating uses of cash in the third quarter of '23. Paid down debt by $25.7 million in the quarter, paid $8.8 million for capital expenditures and paid a $3.4 million dividend on our common stock. I'd also note that $2.5 million of the $8.8 million in capital expenditures related to the facility project in China. The facility move has been essentially completed with the remaining capital expenditure of approximately $2 million to $3 million.
Let me turn next to our EPS results for the quarter. In the third quarter of '23, our GAAP EPS was $2.63 and after adding back $0.03 of relocation costs and $0.03 of restructuring and impairment costs, our adjusted EPS was $2.69. The relocation costs relate to the facility project in China, and the restructuring and impairment costs relate to the consolidation of one of our smaller manufacturing facilities into a larger facility, both in Europe.
In the third quarter of '22, our GAAP EPS was $2.35. And after adding back $0.02 of acquisition costs and $0.01 of restructuring costs, our adjusted EPS was $2.38. As shown in the chart, the increase of $0.31 in adjusted EPS in the third quarter '23 compared to the third quarter of '22 consists of the following: $0.53 due to higher revenue, $0.13 due to higher gross margins and $0.01 due to a lower tax rate.
These increases were partially offset by $0.33 due to higher operating expenses, $0.02 from higher interest expense and $0.01 from higher weighted average shares outstanding. Collectively included in all the categories I just mentioned was a favorable foreign currency translation effect of $0.03 in the third quarter of '23 compared to the third quarter of last year.
Looking at our liquidity metrics on Slide 15. Our cash conversion days, which we calculate by taking days in receivables plus days in inventory and subtracting days in accounts payable, were 138 at the end of the third quarter '23, unchanged from the prior quarter.
Working capital as a percentage of revenue decreased to 15.4% in the third quarter of '23 from 16.7% in the second quarter of '23. Our net debt, that is debt less cash, decreased $36 million or 42% sequentially to $50 million at the end of the third quarter '23. We've paid down $70 million of our revolving credit facility debt in '23, helping to lower our leverage ratio calculated in accordance with our credit agreement to 0.38% at the end of the third quarter '23 compared to 0.74% at the end of '22.
Our net interest expense increased $0.2 million to $1.7 million in the third quarter '23 compared to $1.5 million in the third quarter '22. We have a strong balance sheet and are well positioned to take advantage of investment opportunities with our current net debt position of $50 million, current borrowing capacity of $285 million available under our revolving credit facility and an additional $200 million of uncommitted borrowing capacity.
Now turning to our guidance for the fourth quarter and full year '23. Due to our strong third quarter performance, we are increasing our full year revenue guidance to $941 million to $949 million from $925 million to $940 million. And we are increasing our adjusted EPS guidance for the full year to $9.65 to $9.75 from $9.15 to $9.35. The adjusted EPS guidance excludes $0.03 of relocation costs and $0.03 of restructuring and impairment costs.
Our revenue guidance for the fourth quarter of '23 is $222 million to $230 million, and our adjusted EPS guidance is $2.02 to $2.12. As always, I'll caution here, there could be some variability in our quarterly results due to several factors, including the variability of order flow and the timing of capital [shipments].
In addition, other risks that could impact our guidance include Central Bank's policy responses to inflation, geopolitical tensions and softening markets. We continue to anticipate gross margins for '23 will be 43% to 43.5% with fourth quarter margins projected to be in the mid 42% range as the mix is expected to be more heavily weighted towards capital.
We expect our tax rate for the fourth quarter will be approximately 27%. We hope these guidance comments are helpful, and that concludes my review of financials. And I will now turn the call back over to Amy for our Q&A session. Amy?
Question and Answer Session
Operator
(Operator Instructions) Our first question comes from Gary Prestopino with Barrington Research.
Gary Frank Prestopino
Could you maybe -- I was trying to write this down as quickly as possible. Could we maybe [delve] a little bit into the strength that you saw in Material Handling. And I think you said you were going to see maybe a step down in demand in Q4. Could you help me out there?
Michael J. McKenney
Sure. Well, we had very -- we've had very strong performance on the material handling front on the -- in regards to bookings, and that continued in the third quarter. And I would say -- I'd remind you that in the first quarter, we had a large order that we booked for that conveying system, the 42-mile (inaudible) conveying system. And that is -- you're seeing some of that in revenue in the third quarter, and you're going to see a good portion of that revenue in the fourth quarter.
So I think on the revenue front, Material Handling performance will be pretty strong. But on the bookings front, I'd say -- I'll just -- let me just take a peek here for the fourth quarter. We usually don't get too granular on forecasting bookings. But when I look back to our performance in the fourth quarter of '22, we had quite a strong quarter on capital bookings. And I would anticipate that we'll see that pull back a little bit. So that may cause -- overall, that may make Material Handling kind of flattish or down a little bit on the bookings front.
Gary Frank Prestopino
You also -- I wrote down demand for balers that was pretty strong, too. Or do I have the right...
Michael J. McKenney
Yes. We had a very good strength in the baler business.
Gary Frank Prestopino
Okay. And then the Flow Control, you mentioned good levels of project activity within various segments of the business. Could you maybe elaborate on that a little bit?
Jeffrey L. Powell
Yes. So of course, we're particularly strong -- they're particularly strong in the packaging and paper. But they've also done a great job. That product line probably has more applications through the general industry than almost any other product we have, and they've grown that side -- that industrial side nicely. So they're particularly strong in the metals. They have -- they're particularly strong in food, in tissue, which is a subset of paper, but a little more stable. And then just general industry.
It's amazing how many industries that are out there that use our fluid handling products from solar fields to wind mills to just all kinds of applications out there. So there's quite a mix of general industry that -- and they're continuing to make good progress in taking their products to new markets.
And so in fact, I'd say that's true through all of Kadant where our largest segment now is what we call General Industry. It's our biggest of all of our segments. So everybody works hard to try to take their products into new markets and the fluid handling, in particular, has a lot of broad applications there.
Operator
Our next question comes from Lawrence De Maria with William Blair.
Lawrence Tighe De Maria
First question, do you expect, I believe, flat backlog at the end of the year, obviously gave your sales guide implies orders pick up sequentially to the [$220 million to $230 million] range. So I guess, first, what's driving that uptick sequentially especially MH is maybe down a little bit. I guess the other two have to be up. But is there any specific driving that because that's good visibility as we move into next year?
Michael J. McKenney
Well, I'd say specific to the fourth quarter, Larry, I'm not sure how you define that. We -- basically, the guidance we gave last quarter, we indicated that we expected bookings in the third and fourth quarter to kind of be [mere] what we saw last year in the third and fourth quarter. So...
Jeffrey L. Powell
So I think we think right now, it looks like it's going to be relatively flat. I will tell you that when you're dealing in the economy right now with all the puts and takes, it's particularly hard to figure out what demand is, in particular, the timing on it, Larry. the customers are being cautious. They're looking for more visibility. The Fed today is going, I guess, to make an announcement that may impact the thinking a little bit.
So I would say these times are more uncertain than we normally see just because of where we are in this economic cycle and kind of the interest rate environment. But generally speaking, we think that it's going to be fairly flat with last quarter and really with last year.
Lawrence Tighe De Maria
And that's on the orders, right?
Jeffrey L. Powell
That's on the orders, right.
Lawrence Tighe De Maria
Yes, exactly. And okay, that's very helpful. Then -- and well, just to clarify there. And obviously, one would assume that there's much more price -- there's more price in these orders. So is it fair to say that it is more price and lower volume as we exit the year? Or maybe that's worth discussing, but I think it is.
Jeffrey L. Powell
Well, as you know, we really work hard to try to contain our costs, maximize our value to our customers. There are times and there were times during the last probably 18 months where we have had to pass some price increases on because the cost increases were just so significant. But we always work hard to really try to reduce our costs so that we maximize the value for our customers.
Clearly, if you look at our margins, they've stayed pretty flat, which would tell you that our divisions did a good job of staying in front of the inflationary pressures and we're able to kind of maintain the kind of a flat performance, which is what we were shooting for. And so there is some -- certainly some price increases that have stuck, some input costs have started to come down. But if you look at our margins, it would tell you that we just kind of stayed kind of even with what was going on from a cost standpoint.
Lawrence Tighe De Maria
Perfect. And then my other question, bigger picture, International Paper obviously shutting down, large portion, I think 10% of the installed base. So there's some pulp and paper, multiple and going on in closures. So can you speak to the direct impact to your business if you're seeing it yet, how material that could be for '24? So just kind of help us contextualize some of those bigger events that are happening and drill down into what it means for your performance if you think about it?
Michael J. McKenney
Well, I'll open up on that one, Larry, specific to the most, I'd say, most recent IP announcement. When I look across the operations that they're going to be closing there. Kadant isn't doing a lot of business in those mills. Some of that was on the pulp side, not much in the way of activity for us there. The other on the containerboard side. Those -- we do business in those mills, but they haven't been very big for us.
Jeffrey L. Powell
So we don't -- and of course, some of that production will get shifted to the more efficient mills. And so we don't think that, that particular announcement will show up in our numbers in any material way.
Lawrence Tighe De Maria
Okay. So we shouldn't really analyze those and think that's going to have a big impact...
Jeffrey L. Powell
(inaudible) If you look at the cost, the production cost to paper companies, especially in the Northwest, relative to the cost in other parts of the country and in particular, Southeast, there's a significant difference in their cost. We're talking, in some cases, hundreds of tons, hundreds of dollars, $200, $300 a ton difference in production cost. And so when you see an announcement in these mills, it's often -- if it's a very old [inefficient] mill or more likely, it's just in a very high-cost area, and they've got the ability to move that production down into a low-cost area.
And so what you really need to look at is kind of what the total output is of paper products in the country because if it's just transitioning from one region to the next, we operate in every mill, and so we're likely not to see a big impact from that.
If you see tonnage dropping down, no, that's a different issue. I mean, for instance, I think packaging boxes this year are down about 7.3% over last year. So we felt that, obviously, our bookings have slowed down in that area because of that. But when it's just shifting from a higher-cost area to a lower-cost area, that has less of an impact on us because we'll just -- as they pickup volume, another mill will benefit in that.
Lawrence Tighe De Maria
Well, at that point, should we expect either further shutdowns in other areas? Or -- and how -- do you have a view on tonnage next year as it relates to the specific end market?
Jeffrey L. Powell
If you look at what the companies have announced already in the third quarter, I would say the general tone is slightly optimistic that things will -- are improving a little bit, not in a significant way because I think there's still enough visibility. But I would just -- if you look at the color that they're giving on their earnings calls, they're hoping they saw a little slight pickup in the third quarter in some cases, and they're hoping that there'll be some continued improvement into next year. But I think it's still -- they'll caution that it's, as I said earlier, still in certain times, visibility is not great. But they are, I would say, slightly positive that things are going to strengthen a little bit.
Operator
Our next question comes from Aditya Madan with D.A. Davidson.
Aditya Madan
I actually have a follow-up to that question. So we've seen the North America containerboard sector work through big destocking challenges and volumes seem to be a better trajectory. But we've also seen curtailment announcements and we are far from a strong market. So how are you seeing those different elements impact parts and consumables demand versus capital equipment appetite and whether you think that potential inflection in the market could represent inflection for your activity levels with that customer base?
Jeffrey L. Powell
Well, you're right, there's been two kind of trends or phenomenon happening this year. One is, of course, a slowdown in industrial production. But also there has been a destocking effort going on, both with our customers and their customers. When there's uncertain times and the Fed's trying to talk down the economy, everybody tends to destock and try to conserve capital. So there has been some of that. That can go on forever.
Our experience in the past says that, that happens for a number of quarters. And then as visibility starts to get a little clearer, you'll start to see that destocking stop and then obviously ultimately reverse, as they start to build inventory. And there's a little bit of that going on. I think I've seen some of the companies announced that they're starting to maybe build inventories a little bit. I think it's still a little too early to know if that's a trend that you're going to see throughout the industry. But maybe at a minimum, maybe the destocking has kind of hit its bottom, that's certainly our hope that destocking hit its bottom, and we'll start to see inventory start to build a little bit.
Most of our customers that we talk to think that the first half of next year is still going to be kind of sluggish and their hope is that the second half of the year is going to improve. Many of them are sitting on a lot of money. They made a lot of money in the last few years. And frankly, many of them have equipment that it's run hard. They ran it very hard the last few years to meet demand. And they really need to make some investments, but they're just waiting to see kind of when the economy starts to turn and interest rates start to drop.
So that's kind of the -- what we're currently operating under is the belief that things will probably start out slowly next year and with a little hope will start to improve as the year goes on, certainly in the back half of the year.
Aditya Madan
Great. Yes, that's good to hear. So as a follow-up, has the tone in your conversations with customers changed much relative to last quarter? And have there been any additional indications regarding customers potentially looking to push out or extend time lines on capital projects?
Jeffrey L. Powell
Well, that's normally what happens. I think we normally say on most calls that it's unusual for projects to be canceled -- terminated forever. They just get delayed. And I would say in all the discussions we've had with our customers, and there's actually a fair amount of that, that occurs once summer is over, we kind of -- there's trade shows, industry shows and so we get an opportunity to spend more time with our customers and get a sense of their current thinking.
And I would say what we're generally hearing as I mentioned earlier as well, we've got the cash to make investments. We have some older equipment that we know we need to make some investments in. But we just want to just get a little better sense of where we are in this economic cycle. Have we bottomed out? Is there a recession still to occur? And what's going to go on with interest rates?
So they're all taking a wait and see attitude. But obviously, every quarter that goes by without a downturn or without a technical recession and interest -- and inflation continues to moderate. I think they're -- they become more and more hopeful that we're going to get through this without a true recession and things will start to turn around. But it's -- right now, it's a very challenging time. We'll see what the Chairman [Paul] says today, I think.
Aditya Madan
Yes, I think we're all looking forward to that, so let us see what he has to say. And just lastly, on capital allocation. Just -- I'm just curious on the M&A pipeline? And how are you thinking about M&A versus share repurchases?
Jeffrey L. Powell
So I mentioned, I think through the last couple of quarters that our corporate development group is probably as busy as they've been in many years. There was clearly a slow period kind of during the pandemic and after the pandemic.
But this year, things have been very, very active and of course, our balance sheet is in very, very good shape. So we're well positioned to pursue these opportunities, and we're hopeful that we're going to find some good fits for the organization. But there's a fair amount of discussions and activities and opportunities out there in the marketplace right now.
As far as stock buyback, we haven't done that for many years. We normally have found that we can create -- we create more value if we can find good opportunities to bring companies into the Kadant family. So that tends to be where we first focus on capital allocation. It doesn't mean that we wouldn't buy stock back, but certainly as long as there's good opportunities to acquire companies out there, that's our first priority and focus.
Operator
Our next question comes from John Franzreb with Sidoti & Company.
John Edward Franzreb
I'd like to circle back to what you said about the balers and maybe a little bit more discussion on the whole recycling market. Are you seeing differences in demand on a regional basis or not?
Jeffrey L. Powell
Well, I think North America has been particularly strong, but we've also had good, I would say, really over the last several quarters, maybe 1.5 years or so, Mike, good -- in Europe. There's been a lot of consolidation into larger and larger recycling facilities in Europe. And our machines in Europe are well suited, they are very large multistream machines that are well suited for these big [murfs], these big recycling centers, we are recycling everything. And so we've had good success there. That's a product that gets a fair amount of development and R&D work from an investment standpoint and we've introduced some new products that have been quite successful in Europe.
And also, we brought that product to the U.S. The acquisition of Balemaster really has helped us start to penetrate the U.S. market with our European technology because we now have the engineering and the service network in America that our customers look for here. And so that's helped us a lot, too.
So we started to have some good success with that. So it's -- I would say it's broadly based, but in particular in North America, Balemaster, which makes machines that go into the packaging industry, the distribution centers, the corrugators, they've been quite busy with a lot of demand.
John Edward Franzreb
And in Asia, there was once a major migration going there. Is that process permanently over post-COVID. Where did that end up relative to your expectations?
Jeffrey L. Powell
You're talking about on the baler side or other aspects of the business?
John Edward Franzreb
Other aspects of the recycling business, other aspects of that?
Jeffrey L. Powell
So on the stock [prep] side, which is the technology that recycles packaging and paper, they started to build these facilities, and I think you're referring to the these countries in Southeast Asia that really ring China to get around the [alleged] import ban. I would say that had, I would say, mixed success. As we somewhat expected a lot of those companies said -- those countries said, "Well, if you don't want the waste coming into your country, why would we want it coming into ours". And some of the economics didn't work out and so I would say that's had mixed success.
They've come to the U.S. and built -- took over facilities, [refab] facilities here, and that's really getting some of the fiber. But there's also an emerging kind of recycled fiber market out there that they're able to just buy from, and they're doing that, too. And of course, they're also putting in some mechanical pulp mills into China to generate some fiber there.
But the -- I would say that the -- your question around where we are in that cycle on those countries that ring China, I would say that's slowed down quite a bit and probably would not be a major growth area going forward.
John Edward Franzreb
Perfect (inaudible).
Jeffrey L. Powell
Not going in China. It is a growth area for Southeast Asia because, of course, those countries are still growing well. And so we are booking orders in those countries that -- for a product that will stay in those countries. But as far as they being a fiber source for Mainland China, I think that's probably not going to be a major market.
John Edward Franzreb
Great. And in your prepared remarks, it sounded like you were surprised by the strength of the parts business in the quarter. Did I misinterpret that? And if that was the case, how would you expect the fourth quarter to compare to the third?
Michael J. McKenney
Yes, John, we -- I would say we are very happy with the parts performance. It was quite strong. And as I noted in my call notes, that was the lead driver of the revenue beat. So we're -- that helped us out in the quarter to produce the excellent results that we did produce.
Looking at the fourth quarter, in terms of the parts and consumables front. I think one thing that's a little bit of a unique phenomenon for us is, as we go through the year, the parts bookings are usually their strongest in the first quarter, and then they just kind of slowly step down throughout the year. And I think we'll see that here in the fourth quarter what I'm anticipating. So I think when you stack it up against the third quarter, it will likely be a little bit weaker. But that would be, I'd say, normal course for us.
John Edward Franzreb
Got it. And you had an excellent free cash flow quarter in part due to the inventory drawdown. I guess two questions regarding that. Should we expect not as strong of an operating cash flow quarter as you rebuild the inventory for future capital projects? And now that you've completed that facility relocation, how should we think about CapEx in 2024 relative to 2023?
Michael J. McKenney
Well, I'd say my hope is we are not done producing excellent cash flows. To your specific point on will we need to rebuild inventory? We had a significant backlog in capital, which we've been working down, and that's why I made the comment on inventory finally has started to turn and has come down. So to that specific point, I don't think we'll -- that will be an issue for us until we see the next robust buying cycle and the backlog grows. So I don't think that, that particular issue is going to be a headwind for us. What was the (inaudible)
So yes, the facility project this year, I give numbers on that every quarter, and I think we're going to end up of our overall CapEx, maybe $8 million to $9 million will have been for the facility in China. We have fairly robust demand for robotics from our sites.
So I think you'll see us continue to make investments. If I back off the, we had a facility project in China. We have a facility project in our [Wood Group] in Europe. If I take those out, our CapEx was projected to come in a little over 2%, so I'll say for next year, that's probably where we'll be in that 2 -- a little over 2% range.
Operator
(Operator Instructions) I'm showing no further questions at this time. I would now like to turn the conference back to Jeff Powell for closing remarks.
Jeffrey L. Powell
Thank you, Amy. So before wrapping up the call today, I just want to leave you with a few takeaways. First, 2023 is shaping up to be the best year in our history across a wide range of metrics. We made solid progress this year on our efforts to accelerate revenue growth, win new business and boost our profitability despite the increasingly challenging macroeconomic environment.
Our leverage ratio is 0.38%, which positions us well to pursue new business opportunities. And as always, we expect to deliver excellent cash flows and optimize allocation of capital to maximize the value for our shareholders. With that, we'll conclude the call today, and I want to thank you for joining us.
Operator
This concludes today's conference call. Thank you for participating. You may now disconnect.
