Ryerson Holding Corporation (NYSE:RYI) Q4 2023 Earnings Call Transcript
Ryerson Holding Corporation (NYSE:RYI) Q4 2023 Earnings Call Transcript February 22, 2024
Ryerson Holding Corporation isn't one of the 30 most popular stocks among hedge funds at the end of the third quarter (see the details here).
Operator: Good day, and welcome to the Ryerson Holding Corporation's Fourth Quarter and Full Year 2023 Conference Call. Today's conference is being recorded. There will be a question-and-answer session later. [Operator Instructions] At this time, I would like to turn the conference over to Mr. Pratham Dear, Manager of Investor Relations. Please go ahead, sir.
Pratham Dear: Good morning. Thank you for joining Ryerson Holding Corporation's fourth quarter and full year 2023 earnings call. On our call, we have Eddie Lehner, Ryerson's President and Chief Executive Officer; Mike Burbach, our Chief Operating Officer; Jim Claussen, our Chief Financial Officer; and Molly Kannan, our Chief Accounting Officer and Corporate Controller. John Orth, our Executive Vice President of Operations; Mike Hamilton, our Vice President of Corporate Supply Chain; and Jorge Beristain, our Vice President of Finance will be joining us for Q&A. Certain comments on this call will contain forward-looking statements within the meaning of the federal securities laws. These statements involve a number of risks and uncertainties that could cause actual results to differ materially from those implied by the forward-looking statements.
These risks include, but are not limited to, those set forth under risk factors in our annual report on Form 10-K for the year ended December 31, 2023, and in other filings with the Securities and Exchange Commission. You are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date they are made and not guarantees of future performance. In addition, our remarks today refer to several non-GAAP financial measures that are intended to supplement, but not substitute for the most directly comparable GAAP measures. A reconciliation of non-GAAP measures to the most directly comparable GAAP financial measures is provided in our earnings release filed Form 8-K yesterday and also available on the Investor Relations section of our website.
I'll now turn the call over to Eddie.
Eddie Lehner: Thank you, Pratham, and thank you all for joining us this morning. As we reflect on the fourth quarter and full year of 2023 results, I want to start by recognizing our 4,600 strong Ryerson team for prioritizing a safe and productive operating environment for our over 110 facilities across North America and China. Through the fourth quarter and full year, our service center network became stronger, denser, and more robust as planned. Since 2021, Ryerson has embarked on its largest investment and shareholder return cycle in more than a generation and is an important marker in our 182-year history. As much as I wish we could microwave it, we are timing our investments to the next industry upturn while managing the business intelligently.
2023 and Q4 did not favor Ryerson's end markets, as automotive, aerospace, and non-residential outperformed consumer, general industrial, and machinery and equipment metal-consuming end markets. Commodity bellwether averages for carbon, aluminum and stainless all declined year-over-year. And while Ryerson grew market share in aluminum and stainless, the margin compression for stainless, in particular, was severe and unrelenting. We expect current countercyclical conditions for non-ferrous industrial metals consumption to be transient as we're well into a non-ferrous bottoming, and we maintain a strong conviction around positive longer-term secular demand trends for aluminum and stainless and industrial metals writ large. When looking at Ryerson through a year-over-year prism, I want to note that same-store expenses and headcount are both lower when comparing year-over-year benchmarks and same-store headcount is still 8% below pre-pandemic levels.
Additionally, we increased book value per share to its highest level since Ryerson's IPO in 2014, increased the dividend, continued prudent share buybacks, generated strong free cash flow and free cash flow yields, grew PP&E by [Technical Difficulty] started up the Centralia Washington service center facility and finished construction at University Park, Illinois, with construction and equipment installation expected to be completed in Shelbyville, Kentucky by the end of 2024, while converting 17 of our service centers to SAP for ERP consistency throughout our general line service center business. Now this is not the entire list, but a point of emphasis that there is no growth of any meaning or magnitude without some growing pains. We've been doing the hard but necessary things to create a better operating model centered on value-add and speed-to-market to generate higher through-the-cycle earnings with less volatility when our investments fully phase-in and begin generating operating cash flow.
Despite the noted countercyclical conditions that pervaded Q4 and 2023 overall, I want to share several proof points. We welcomed three exceptional value-added businesses into our family of companies during the fourth quarter. Norlen Incorporated, which we introduced on our last call, is joined by TSA Processing and Hudson Tool Steel Corporation. TSA, headquartered in Houston, has been providing excellent tool processing capabilities for over 30 years and operates across the Midwest and Southern states. Hudson Tool Steel, headquartered in Cerritos, California, has been supplying high-quality and specialty-grade carbon and alloy tool steels for 20 years and has operations on the East Coast as well as the Midwest. The addition of Hudson allows Ryerson to create a tool steel center of excellence by combining the skill sets of Hudson with Ford Tool Steel and Southern Tool Steel.
Throughout 2023, both organically and through acquisitions, Ryerson increased its value-added percentage of sales from 14% to 18% year-over-year, helping mitigate the harsh margin compression noted in stainless in Q4 and for the whole of 2023. Countercycles are never enjoyable, particularly when undertaking significant operating model investments over a multi-year investment period. Keeping to the bigger picture with clarity and focus, we're skating to where the puck is going and then we plan on parking it in the net as we transition back to an industrial metals' upturn whose precise timing we don't know, but when it comes, we'll be ready to make the most of it to the benefit of Ryerson stakeholders. With that, I'll now turn the call over to our Chief Operating Officer, Mike Burbach, to further discuss the pricing and demand environment.
Mike Burbach: Thank you, Eddie, and good morning to everyone. Overall, Ryerson's fourth quarter revenue of $1.1 billion came in line with our guidance expectations, with an average sell price of $2,472 per ton and sales volume of 450,000 tons. Average sell price per ton was down 5.2% quarter-over-quarter at $2,472 per ton, which was slightly below the lower range of our guidance expectations, primarily due to weaker-than-expected conditions in stainless consuming end markets. The index for domestic hot rolled coil prices increased approximately 40% over the quarter in response to mills increasing prices five times from late September to late November. While we realized increases in spot pricing as the quarter progressed, our average sell price was lower quarter-over-quarter due to delayed pricing impact from our contractual customers.
Our bright metals franchise was affected by continued declining LME nickel and LME aluminum prices during the fourth quarter due to continued global oversupply. Turning to the demand environment, broadly speaking, seasonal demand slowdowns impacted activity overall in the fourth quarter, as reflected by weak PMIs and a deceleration in industrial production. Ryerson sales volumes of 450,000 tons were 5.9% lower quarter-over-quarter and within our guidance expectations. Volume decreases were led by a slowdown from end markets related to consumer goods and industrial manufacturing. For the full year 2023, MSCI shipments increased 1.5%, while Ryerson shipments decreased by 4.8%. The difference in Ryerson's year-over-year volumes compared to the overall industry can partially be attributed by our end markets and product mix.
As we don't sell heavily into the automotive, aerospace, or non-residential construction end markets, which were industries with strong growth over 2023, our bright metals franchise outperformed the MSCI but was eclipsed by underperformance in heavier weighted carbon flat rolled products primarily weighted toward the consumer. Despite the decrease in overall tons, we saw full year shipment increases in our commercial ground transportation and oil and gas end markets, following the strength of Class 8 truck orders and rig counts. Finally, I would like to note that we are continuously working to provide our customers with ever-better experiences through our products, network and services, while investing to meet customers' increasing needs from emergent trends through our modernized facilities and increased capabilities.
In that regard, Norlen, TSA, and Hudson are great additions to our service offerings. As we close out the year, our value-add percent of sales has increased to 18%, growing from approximately 14% a year ago, and we reiterate our target of at least 20%. And with that, I'll turn the call over to Jim for fourth quarter financial highlights as well as our first quarter 2024 outlook.
Jim Claussen: Thank you, Mike, and good morning, everyone. During the fourth quarter, we exceeded our guidance on earnings per share, generated positive cash flow, maintained our net leverage ratio within range, and returned cash to shareholders through dividends and share repurchases while continuing to execute our organic and acquisition growth investments. Before discussing guidance for the first quarter, I would like to highlight the drivers for our fourth quarter performance compared to our guidance expectations. In the quarter, we generated $26 million of adjusted EBITDA excluding LIFO. This came in just below the low end of our guidance range of $28 million to $32 million and was driven by pricing and margin pressure most acutely in our stainless steel franchise, which represents approximately 25% of our revenue.
Meanwhile, our earnings per share of $0.74 was notably higher than our guidance range of $0.18 to $0.22 share. The beat on earnings per share was driven largely by the LIFO income recognized over the quarter, which was driven by continued falling costs through the quarter and was representative of the continued market price declines realized in our bright metals franchise. Looking to the first quarter of 2024, we expect volumes to be up sequentially compared to the fourth quarter, in line with normal seasonality and up 8% to 10%. As such, we expect first quarter revenues to be in the range of $1.21 billion to $1.25 billion with average selling price up 1% to 3%. Based on these expectations, we forecast adjusted EBITDA for the first quarter of 2024 excluding LIFO in the range of $58 million to $62 million, and earnings in the range of $0.24 to $0.34 per diluted share.
We expect the impact of LIFO to be relatively neutral in the first quarter. In the fourth quarter, we generated $90 million of cash flow from our operations, which included $15 million released from lower working capital requirements. We ended the period with $436 million of total debt and $382 million of net debt. Ryerson's net leverage ratio ended the year at 1.7 times and remains within our leverage target range of 0.5 times to 2.0 times, while the company's available global liquidity remains healthy at $656 million. For the full year, we generated $365 million of operating cash. In the fourth quarter, we invested $25 million on capital expenditures, which included new equipment at our service center at University Park, Illinois, as well as automation and expansion at our Shelbyville, Kentucky facility.
Our full year capital expenditures of $122 million also included an expansion of our Atlanta facility, investment in a new facility in Las Vegas, Nevada, automation at our Portage, Indiana Laser and Fabrication Center, a state-of-the-art cut-to-length line in Dallas, and the rollout of SAP in our South region for ERP uniformity across our general line service center business. As we look forward to internal growth strategic initiatives in 2024, we anticipate full year capital expenditures to be around $110 million. This figure comprises base maintenance and growth CapEx, includes completion of our state-of-the-art facility in University Park, Illinois, and the expansion of our facility in Shelbyville, Kentucky. The investments we are making are expected to drive better customer experiences, enhance long-term potential of our equipment, improve asset utilization, increase productivity and provide a safer operating environment for our employees.
We are very excited about the modernization efforts taking place across our network and the better customer experiences they will provide to our customer base. Turning to shareholder returns. Ryerson returned $12.6 million in the quarter, which was comprised of $6.3 million in dividends and $6.3 million in share repurchases. We paid a quarterly dividend of $0.1850 per share and have announced a first quarter cash dividend of $0.1875 per share, our 10th consecutive raise. As for share repurchases, after repurchasing just under 220,000 shares for approximately $6 million in the open market during the quarter, we currently have approximately $39 million remaining on our $100 million authorization, which expires in April of 2025. On a full year basis, Ryerson returned approximately $139 million to shareholders, which comprises of $114 million for 3.3 million shares repurchased and $0.72 of dividends declared per share.
During the year, due to secondary share sales by Platinum Equity, our free-floating shares increased from 57% to 88.5%. As we look forward to 2024 and beyond, we will continue to prudently evaluate our shareholder return opportunities as well as our overall capital allocation strategy to maximize long-term shareholder value. With that, I'll turn the call over to Molly to provide further detail on our fourth quarter and full year financial results.
Molly Kannan: Thank you, Jim, and good morning, everyone. In the fourth quarter of 2023, Ryerson reported net sales of $1.1 billion, which was 11% lower sequentially, driven by roughly an equal split of lower volume [Technical Difficulty]. Gross margin of 22.2% was an expansion of 220 basis points versus the previous quarter. Excluding LIFO, gross margin fell 40 basis points from the third quarter to 16.9% as average selling price for our sales mix decreased faster than cost of goods sold. On the expense side, warehousing, delivery, selling, general and administrative expenses increased 6% sequentially to $204 million, driven primarily by higher depreciation expense, higher expenses related to recent acquisitions, and higher reorganization expenses related to ERP systems conversions and startup costs associated with the University Park service center.
These increased expenses were partially offset by lower personnel expenses, lower delivery expenses, and lower fixed and variable operating expenses. For the fourth quarter of 2023, net income attributable to Ryerson was $25.8 million, or $0.74 per diluted share, compared to net income attributable to Ryerson of $35 million, and diluted earnings per share of $1 in the prior quarter. For the full year, net income attributable to Ryerson was $145.7 million, or $4.10 per diluted share. Finally, Ryerson achieved adjusted EBITDA, excluding LIFO, of $25.9 million in the fourth quarter of 2023, which compares to $45 million in the prior quarter. Free cash flow generation was $65.1 million in the fourth quarter and compares to $56.9 million in the prior-quarter period.
For the full year 2023, Ryerson has generated $231 million in adjusted EBITDA, excluding LIFO, and $244 million in free cash flow. And with this, I'll turn the call back to Eddie.
Eddie Lehner: Thank you, Molly. Overall, in the fourth quarter of 2023 and when reflecting on all of 2023, Ryerson navigated through headwinds of mixed pricing and slow demand, which were characterized by a continuation of decreasing bright metals commodities prices driven by global oversupply, as well as a holiday-related slowdown in industrial and consumer purchasing activity. Despite the challenges of navigating through a contractionary manufacturing environment, our business generated cash from our operating model as well as our balance sheet, invested in the growth of our network through new and enhanced service centers, acquisitions, and technological integrations to build out our next-generation operating model and prudently delivered returns to shareholders.
As we look at the full year 2023, it's evident that we faced a terrain change in the market landscape from 2022 with both consumer and industrial manufacturing-related end markets experiencing demand slowdowns, combined with corresponding challenges in metals commodities pricing related to global and domestic supply and demand imbalances. While Ryerson navigated the headwinds of this market cycle, we've remained resolute in continuing to invest in the modernization, expansion, and integration of our service center network, which serves as the engine of growth in our operating model. 2023 marked the second year of our most significant investment cycle in more than a generation. Our investments in modernized facilities, increased value-added services and ERP network integration are aligned with our long-term vision for Ryerson with the goal of adding value to our customers through greater levels of service, speed and efficiency, and providing the industry's best customer experience.
As we look ahead to the first quarter and the rest of 2024 and over the rainbow, we firmly believe that our services, as a trusted partner to our customers, provides a greater good as recyclable industrial metals are the gifts that keep giving and which support and enable emergent trends of nearshoring technological advancement and sustainability. Even more importantly, investment in industrial metals and manufacturing continues to show its undisputed magic in generating higher quality of life and well-being for humankind when we're smart enough to invest what is required. The investments Ryerson is making throughout our network of intelligently connected industrial metal service centers is to deliver those great customer experiences with joy, speed, scale, value-added consistency to position Ryerson and its stakeholders well for an enduring and valuable future.
With that, we look forward to your questions. Operator?
Operator: Thank you. [Operator Instructions] We'll take our first question from [Sreenath Kesavan] (ph) with KeyBanc Capital Markets. Your line is open. Please go ahead. Sir, your line is open. You may want to check your mute button. And I'm not hearing a response from that line. [Operator Instructions] And at this time, I don't have any questions holding. Mr. Lehner, I'll turn the conference back to you for any additional remarks.
See also 20 Best Cities to Retire on $10,000 a Month Anywhere in the World and 13 Best Car Stocks To Buy Right Now.
To continue reading the Q&A session, please click here.
