Century Aluminum Company (NASDAQ:CENX) Q4 2023 Earnings Call Transcript

In this article:

Century Aluminum Company (NASDAQ:CENX) Q4 2023 Earnings Call Transcript February 21, 2024

Century Aluminum Company beats earnings expectations. Reported EPS is $0.39, expectations were $-0.23. CENX isn't one of the 30 most popular stocks among hedge funds at the end of the third quarter (see the details here).

Operator: Good afternoon. Thank you for attending the Century Aluminum Company Fourth Quarter 2023 Earnings Conference Call. My name is Matt, and I'll be your moderator for today's call. [Operator instructions]. I will now like to pass the conference over to our host Ryan Crawford with Century Aluminum. Ryan, please go ahead.

Ryan Crawford: Thank you operator. Good afternoon everyone and welcome to the conference call. I'm joined here today by Jesse Gary, Century's President and Chief Executive Officer. Jerry Bialek, Executive Vice President and Chief Financial Officer. And Peter Chipskovsky, Senior Vice President of Finance and Treasurer. After our prepared comments, we will take your questions. As a reminder, today's presentation is available on our website at www.centuryaluminum.com We use our website as a means of disclosing material information about the company and for complying with Regulation FD. Turning to slide one, please take a moment to review the cautionary statements shown here with respect to forward looking statements and non-GAAP financial measures contained in today's discussion. And with that, I'll hand the call to Jesse.

Jesse Gary: Thanks, Ryan. Thanks to everyone for joining. I'll start today by quickly reviewing our 2023 performance. Before turning to the current macro environment and some dynamic operating conditions we are working through in Q1. Jerry will then take you through the details of the fourth quarter results and Q1 outlook. And then I'll finish with an update on the Inflation Reduction Act, potential further benefits that we expect to receive. Turning to slide three, market conditions remain volatile last year, reflecting a seemingly new normal we've experienced post-COVID, where a broadly balanced global supply and demand picture for aluminum is paired with historically low levels of inventories; tight global inventories, along with rising and dynamic geopolitical tensions, has created a market where small changes in market conditions are driving outsized effects on aluminum prices.

Despite this continued volatility, Century produced adjusted EBITDA of $120 million in 2023, including $57 million of adjusted EBITDA in Q4, reflecting the impact of our 2023 Inflation Reduction Act advanced manufacturing credit. Jerry will give you the full details here in a bit. Our team completed several strategic projects last year, including the acquisition of our 55% share in Jamalco, completing our long-held ambitions to secure a captive supply of high-quality alumina and bauxite for our smelters to create a more balanced, consistent, and robust operational footprint and better position us to deliver strong performance through commodity cycles. Returning this asset to its full potential will continue to be one of our main priorities in 2024.

Finally, we continue to focus on our most important priority, to return our employees home safely at the end of each and every day. While we will never be satisfied until we achieve zero workplace injuries, our team should be proud to have reduced injuries by 20% over 2022 levels. We hope to significantly improve on this trend in the coming year. Market conditions for centuries' businesses continue to reflect uncertain macroeconomic conditions in much of the world. As you can see on slide four, global supply and demand remain roughly balanced and global inventories remain near all-time lows. The driving forces behind these balanced markets, however, are much more dynamic than years past and reflect the complexity of the current market. Supply was largely constrained over the past year.

In China, growth was limited by their 45 million ton capacity cap and continued curtailments in Yunnan and surrounding provinces. Western supply also remained challenged over the past year by a difficult demand picture that ultimately led to the curtailment of two more Western smelters in Neuss, Germany, and New Madrid, Missouri. A bit further east, Russian metal continues to be disfavored in Western markets, where Russian metal today constitutes 90% of all LME inventories. There have been increasing calls for Russian aluminum sanctions in the EU and US following the initial implementation of a 200% tariff on Russian products into the US and an EU ban on certain downstream Russian aluminum products into the EU. On the demand side, Western world demand appears to have reached a low in Q3, driven by continued destocking across downstream users and challenging EU industrial growth.

The market saw increased demand in Q4, and we now expect an improved and growing Western demand equation in 2024. Overall, we expect that Western demand will return to its long-term growth rates as falling interest rates and improved GDP growth returns to the US and EU markets, and the Inflation Reduction Act and similar spending programs in the EU and elsewhere continue to drive increased aluminum demand in automotive and renewable energy applications. The largest demand side story in 2023, however, was the strength of the Chinese market, where we saw Chinese demand growth of 5% in 2023 and expect to see similarly high growth rates this year. We estimate that the Chinese market imported about 1.3 million tons of non-Chinese production last year, and we expect that to expand further this year.

Chinese demand growth has been driven by the broad macro trends we have long expected, namely in aluminum-intensive electric vehicles and renewable energy applications. We expect demand growth in these areas to continue to accelerate this year, both in China and the West. As we have discussed over the course of the past year, billet demand in the US and Europe has been a relatively weak point in the market, as post-pandemic destocking continued and increased imports of extrusions into both markets decreased domestic billet demand. Due to the annual contract structure for billets in the US, we were somewhat insulated from this downturn in 2023 by higher annual contract prices set in late 2022. Unfortunately, demand conditions for billets in both the US and Europe remained weak in Q4 and into Q1 of this year, which created a headwind in our 2024 billet contract negotiations and led to lower pricing that we expect will impact our Q1 results by around $10 million from Q4 levels.

Despite these near-term headwinds, we continue to anticipate very constructive long-term billet demand trends in both the US and Europe, as automotive light-weighting and renewable energy applications drive increasing aluminum consumption. We expect this trend to support significant long-term demand expansion for primary aluminum billet and slab in the EU and US. In addition, as you can see on slide 7, we expect that the pending US anti-dumping, countervailing-duty trade case against extrusion imports from 14 countries will have a significantly positive impact on domestic US billet demand beginning in the second half of 2024. In August, the US aluminum extrusion industry filed suit alleging dumping and illegal subsidies by countries constituting over 68% of extrusion imports and over 27% of total US extrusion demand.

The US International Trade Commission has already determined there's an indication of material injury to the US industry, and in March and May of this year, the US Department of Commerce is expected to rule on the preliminary implementation of anti-dumping and countervailing duties against the subject imports. If implemented, the duties would immediately go into effect and are expected to have a material impact on the US extrusion and billet markets. This is an example. When anti-dumping duties were first placed on aluminum extrusions from China in 2011, imports of subject extrusions from China immediately dropped to almost zero due to the significant relief provided by the anti-dumping and countervailing duties, and the domestic industry accordingly took back significant market share.

We would expect a similar impact from this case if duties are leveled in March and May, meaning that 27% of domestic extrusion demand currently met by the subject imports would have to be served by increased US extrusion production and a corresponding increase in US billet demand. While we are not direct participants in the case, we have reviewed the case in detail and believe it is strong on the merits. If successful, the ADE-CBD duties would benefit spot billet premiums in the second half of 2024, and we have accordingly left more of our second half billet volumes open to potentially benefit from the higher pricing environment. The ADE-CBD duties would remain in place for at least five years, driving increased US billet demand across the period and beyond.

Peering to operations, we saw strong and stable performance across our smelters in Q4, while the Jamalco refinery continued to recover from the energy-related disruptions suffered in late September. We now expect that some of the production and cost efficiencies that we expected to Jamalco in Q1 will instead begin in Q2. In Iceland, a relatively dry and cold winter has led to water levels in the nation's hydro scheme falling below normal levels, and the energy companies have accordingly issued partial curtailment orders across their industrial customers, including our Grundertangi smelter. These curtailments first began in early December and are expected to reduce Grundertangi's energy consumption by approximately 20 megawatts, about 3% of our total load.

We expect that the curtailment will finish by the end of April, but this remains subject to weather patterns and reservoir levels in Iceland. Based on the scheduled curtailment end date, we expect that the curtailments will reduce Grundertangi's 2024 production by approximately 3,500 metric tons. This impact is included in our Q1 and full-year volume guidance. It also impacted our Q4 production levels, and you can see the impact in the volume column on our bridge on page 9. Finishing out the energy picture, energy prices in the US have generally been constructive, driven by a mostly moderate winter and natural gas prices near $2. A nationwide mid-January cold snap did drive about a week of very high US power prices, which we expect to have a negative impact of about $5 million in Q1.

A warehouse of aluminum ingots, neatly lined up ready to be shipped.
A warehouse of aluminum ingots, neatly lined up ready to be shipped.

Other than this week of very cold weather, power prices have been very constructive, and the power price forwards have fallen significantly since the cold snap, reflecting the low natural gas price. On the raw materials side, we've begun to see many of our raw material imports begin to return towards historical pre-pandemic price levels, with Coke, Pitch, and Cossack Soda prices moving most significantly downward over the past couple months. Due to our contractual and physical inventory lags, the benefits of these price decreases will take some time to roll through our results, which Sherry will give you a bit more detail on. We do expect Coke prices especially to continue to moderate further over the course of this year. Finally, in light of the currently suppressed demand environment, we've implemented a new cost control program designed to lower our spending while aluminum prices remain depressed.

We, of course, have executed similar programs in the past, and we are confident that we will be able to reduce costs and also our cash spending during this period. Sherry's leading this initiative for us, and will provide you with the details. In light of this environment and long supply chains, we continue to work on our Mount Holly restart plans. But do not expect that we will have any significant capital or cash requirements for the restart over the course of 2024. J erry will now walk you through the quarter and our Q1 outlook.

Jerry Bialek: Thank you, Jesse. Let's turn to slide 8 to review fourth quarter results. On a consolidated basis, fourth quarter global shipments were nearly 174,000 tons, up 1% sequentially. Realized prices, however, decreased substantially versus prior quarter, due primarily to significantly lower lagged LME prices and delivery premiums, resulting in net sales of $512 million, a 6% decrease sequentially. Looking at Q4 operating results, adjusted EBITDA attributable to century was $57 million, an improvement of $48 million compared with the third quarter. During the period, we recorded a full year benefit of $59 million related to the Inflation Reduction Act Advanced Manufacturing Credit, Section 45X. Adjusted net income was $40 million, or $0.39 per share.

The major adjusting items were add-backs of $7 million in costs related to the Jamalco equipment failure, $3 million for the unrealized impacts of forward contracts, and $1 million for share-based compensation. We had strong liquidity of $312 million at the end of the quarter, consisting of $89 million in cash and $223 million available on our credit facilities. Turning to slide 9 to explain the $48 million fourth quarter sequential improvement in adjusted EBITDA. In total, adjusted EBITDA for the fourth quarter was $57 million. Realized lagged LME prices and delivery premiums were significantly lower in the quarter. Realized LME of $2,182 per ton was down $55 versus prior quarter, while realized U.S. Midwest premium of $425 per ton was down $68, and European delivery premium of $280 per ton was down $44.

Together, these factors amounted to a $19 million headwind in the quarter. Power costs increased by $1 million. Realized alumina cost was $382 per ton, $13 lower on a sequential basis. Realized coke prices decreased 9%, and realized pitch prices decreased 5%. Remember, there is a three to four month lag for alumina, coke, and pitch costs to work through our income statement. Together, alumina and other raw material costs resulted in a $14 million improvement in EBITDA. Volume OPEX and premiums mix were headwinds of $2 million and $3 million, respectively. And as I said earlier, during the period we recorded a full year benefit of $59 million related to the IRA Advanced Manufacturing Credit. For additional clarity, the IRA credit was calculated as 10% of production costs incurred, excluding direct and indirect material costs.

Note, the Department of Treasury is still considering including direct and indirect material as eligible costs. Jesse will elaborate further in his closing remarks. With that, let's turn to Slide 10 for a look at cash flow. We began the quarter with $93 million in cash and end December with $89 million. Capital expenditures totaled $30 million, $22 million of which relates to the Grundartangi casthouse project. Semi-annual interest payments were $13 million and net debt repayments were $30 million. Working capital and other items contributed $68 million. We continue to maintain our focus on optimizing working capital, but as I mentioned last quarter, some of these savings are related to the timing of material flows, which may reverse in subsequent quarters.

Let's turn to Slide 11, and I'll give you some insight into our expectations for the first quarter of 2024. For Q1, the lagged LME of $2,190 per ton is expected to be up about $8 versus Q4 realized prices. The Q1 lagged U.S. Midwest premium is forecast to be $416 per ton, down $9. The European delivery premium is expected at $222 per ton or down about $58 per ton versus the fourth quarter, but we have seen improvement in EDPP in recent weeks with pricing earlier this week at nearly $250 per ton. Taken together, the LME and delivery premium changes are expected to decrease Q1 EBITDA by approximately $2 million versus Q4 levels. We expect power prices to be flat quarter-over-quarter despite a $5 million negative impact from the January cold snap.

Looking at our key raw materials, lagged realized alumina cost is expected to be about flat. We expect a favorable impact from lower coke and pitch prices. Caustic soda prices are trending down, as I'd like to remind you that it takes five to six months for caustic spot prices to flow through our P&L. All in, we expect lower raw material costs to contribute $5 million to $10 million to EBITDA. The weak billet demand has driven value-added premiums down. We, therefore, expect about a $10 million VAP impact to EBITDA in Q1. We expect volume to be a slight headwind given the power curtailment imposed on Grundartangi facility. Finally, we expect OpEx to contribute $5 million to EBITDA in Q1. As Jesse highlighted in his opening comments, we have developed a robust playbook aimed at navigating the current demand landscape by effectively managing costs and preserving cash flow.

We actively identify areas for efficiency enhancement, exercise prudence and discretionary expenditures and diligently pursue cost reduction initiatives, all in pursuit of establishing a sustainable and financially sound operational framework. All factors considered, our outlook for Q1 adjusted EBITDA is expected to be in a range of between $5 million to $15 million. From a hedge impact standpoint, we expect no impact in the first quarter as we have very limited hedges in place. We expect tax expense of approximately zero to $5 million. As a reminder, both of these items fall below EBITDA and impact adjusted net income. Now referring to Slide 17 for full year 2024 financial assumptions. We expect shipments to be flat compared to 2023. In line with our objective to conserve cash, we are managing spending very deliberately.

We do expect to invest approximately $10 million to $15 million in sustaining CapEx and about $10 million to $15 million in Jamalco. In addition, investment of approximately $15 million to $20 million remains on our Iceland casthouse project, which will be funded in Q1 from our dedicated Grundartangi casthouse credit facility. The impact of the hedge book will vary with market conditions throughout the year. But to assist with anticipating these impacts on a go-forward basis, we have updated our previously reviewed financial hedge landscape, which can be found on Page 19 in the appendix. Note, we have no remaining Nord Pool exposure in 2024. And now I'll turn the call back over to Jesse.

Jesse Gary: Thanks, Jerry. If you turn to Page 12, I'd like to finish with some additional discussion regarding Section 45X and our expected benefits there under. As we discussed in December, the proposed regulations clarified many aspects of the law, but Treasury asked for comments on several others, while specifically highlighting the important role that critical minerals, like aluminum, play in the renewable energy and energy storage industry. First and foremost, the proposed regulations confirmed the application of Section 45X to substantially all of Century's primary aluminum production in the United States. The proposed regulations also clarified that eligible costs that qualify for the 10% credit are to be construed broadly to include all costs incurred by the producer and the production of the critical minerals other than certain direct and indirect material costs.

Importantly, the Treasury Department also specifically notes that it is still considering adding direct and indirect material costs as eligible costs under Section 45X and requested comments regarding how such costs should be treated for purposes of the critical minerals tax credit. We are discussing with Treasury the essential nature of these materials and the significant associated costs as indeed, it would not be possible to produce U.S. aluminum without materials like alumina and carbon anodes. Our position is in line with a broad set of industry participants, ranging from the critical mineral producers to our downstream customers, including automotive companies seeking to ensure stable domestic supply chains. Overall, there seems to be broad consensus amongst industry and consumers.

Such costs should be eligible for the tax credit, and we are very hopeful that they will ultimately be included as eligible costs. Importantly, Senator Manchin, along with several of his colleagues recently submitted comments to Treasury, noting that their intent as drafters was for the direct and indirect material costs to be eligible and they called on Treasury to expeditiously revise the regulations accordingly. If direct and indirect material costs are ultimately added in its eligible costs under 45X, we'd expect to recognize an additional annual benefit of $50 million to $55 million for 2023 and similar annual amounts for 2024 and going forward. Any potential increases in future production would also be eligible for the production tax credit and would be expected to increase our annual benefit on a roughly pro rata basis to the amount of increased production.

We will continue to update you as we receive more guidance from the Treasury Department. We look forward to your questions today, and we'll turn the call over now to the operator.

See also 35 Top Paying Jobs in America and 35 Most Visited Countries in the World: 2024 Rankings.

To continue reading the Q&A session, please click here.

Advertisement